Internet Engineering Task Force (IETF) E. Beili
Request for Comments: 6766 Actelis Networks
Category: Standards Track February 2013
ISSN: 2070-1721
Internet Engineering Task Force (IETF) E. Beili
Request for Comments: 6766 Actelis Networks
Category: Standards Track February 2013
ISSN: 2070-1721
xDSL Multi-Pair Bonding Using Time-Division Inverse Multiplexing (G.Bond/TDIM) MIB
使用时分反向复用（G.Bond/TDIM）MIB的xDSL多对键合
Abstract
摘要
This document defines a Management Information Base (MIB) module for use with network management protocols in TCP/IP-based internets. This document proposes an extension to the GBOND-MIB module with a set of objects for managing multi-pair bonded xDSL interfaces using Time-Division Inverse Multiplexing (TDIM), as defined in ITU-T Recommendation G.998.3.
本文档定义了一个管理信息库（MIB）模块，用于基于TCP/IP的Internet中的网络管理协议。本文件提出了对GBOND-MIB模块的扩展，其中包含一组对象，用于使用时分反向复用（TDIM）管理多对绑定xDSL接口，如ITU-T建议G.998.3中所定义。
Status of This Memo
关于下段备忘
This is an Internet Standards Track document.
这是一份互联网标准跟踪文件。
This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 5741.
本文件是互联网工程任务组（IETF）的产品。它代表了IETF社区的共识。它已经接受了公众审查，并已被互联网工程指导小组（IESG）批准出版。有关互联网标准的更多信息，请参见RFC 5741第2节。
Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc6766.
有关本文件当前状态、任何勘误表以及如何提供反馈的信息，请访问http://www.rfc-editor.org/info/rfc6766.
Copyright Notice
版权公告
Copyright (c) 2013 IETF Trust and the persons identified as the document authors. All rights reserved.
版权所有（c）2013 IETF信托基金和确定为文件作者的人员。版权所有。
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
本文件受BCP 78和IETF信托有关IETF文件的法律规定的约束(http://trustee.ietf.org/license-info)自本文件出版之日起生效。请仔细阅读这些文件，因为它们描述了您对本文件的权利和限制。从本文件中提取的代码组件必须包括信托法律条款第4.e节中所述的简化BSD许可证文本，并提供简化BSD许可证中所述的无担保。
Table of Contents
目录
1. Introduction ....................................................2
2. The Internet-Standard Management Framework ......................3
3. The Broadband Forum Management Framework for xDSL Bonding .......3
4. Relationship to Other MIB Modules ...............................3
4.1. Relationship to the Interfaces Group MIB Module ............3
4.2. Relationship to the G.Bond MIB Module ......................3
5. MIB Structure ...................................................4
5.1. Overview ...................................................4
5.2. Link Protection Configuration ..............................4
5.3. Service Configuration ......................................5
5.3.1. Management of TDM Services and Service Drop
Priority during Bandwidth Degradation ...............6
5.3.2. Service Notifications ...............................6
5.4. Performance Monitoring .....................................7
5.5. Mapping of Broadband Forum TR-159 and ITU-T G.998.3
Managed Objects ............................................7
6. G.Bond/TDIM MIB Definitions ....................................10
7. Security Considerations ........................................51
8. IANA Considerations ............................................53
9. Acknowledgments ................................................53
10. References ....................................................53
10.1. Normative References .....................................53
10.2. Informative References ...................................54
1. Introduction ....................................................2
2. The Internet-Standard Management Framework ......................3
3. The Broadband Forum Management Framework for xDSL Bonding .......3
4. Relationship to Other MIB Modules ...............................3
4.1. Relationship to the Interfaces Group MIB Module ............3
4.2. Relationship to the G.Bond MIB Module ......................3
5. MIB Structure ...................................................4
5.1. Overview ...................................................4
5.2. Link Protection Configuration ..............................4
5.3. Service Configuration ......................................5
5.3.1. Management of TDM Services and Service Drop
Priority during Bandwidth Degradation ...............6
5.3.2. Service Notifications ...............................6
5.4. Performance Monitoring .....................................7
5.5. Mapping of Broadband Forum TR-159 and ITU-T G.998.3
Managed Objects ............................................7
6. G.Bond/TDIM MIB Definitions ....................................10
7. Security Considerations ........................................51
8. IANA Considerations ............................................53
9. Acknowledgments ................................................53
10. References ....................................................53
10.1. Normative References .....................................53
10.2. Informative References ...................................54
Multi-pair bonding using Time-Division Inverse Multiplexing (TDIM), a.k.a. G.Bond/TDIM, is specified in ITU-T Recommendation G.998.3 [G.998.3], which defines a method for bonding (or aggregating) multiple xDSL lines (or individual bearer channels in multiple xDSL lines) into a single bidirectional logical link carrying a mix of various traffic streams, e.g., Ethernet, Asynchronous Transfer Mode (ATM), Time-Division Multiplexing (TDM).
ITU-T建议G.998.3[G.998.3]中规定了使用时分反向复用（TDIM）的多对键合，也称为G.Bond/TDIM，该建议定义了一种键合（或聚合）多条xDSL线路（或多条xDSL线路中的单个承载信道）的方法一条双向逻辑链路，承载各种业务流的混合，例如以太网、异步传输模式（ATM）、时分多路复用（TDM）。
The MIB module defined in this document provides G.Bond/TDIM-specific objects for the management of G.998.3 bonded interfaces, extending the common bonding objects specified in the GBOND-MIB [RFC6765] module.
本文件中定义的MIB模块为G.998.3绑定接口的管理提供了G.Bond/TDIM特定对象，扩展了GBOND-MIB[RFC6765]模块中规定的通用绑定对象。
For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [RFC3410].
有关描述当前互联网标准管理框架的文件的详细概述，请参阅RFC 3410[RFC3410]第7节。
Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580].
托管对象通过虚拟信息存储（称为管理信息库或MIB）进行访问。MIB对象通常通过简单网络管理协议（SNMP）进行访问。MIB中的对象是使用管理信息结构（SMI）中定义的机制定义的。本备忘录规定了符合SMIv2的MIB模块，如STD 58、RFC 2578[RFC2578]、STD 58、RFC 2579[RFC2579]和STD 58、RFC 2580[RFC2580]所述。
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14, RFC 2119 [RFC2119].
本文件中的关键词“必须”、“不得”、“必需”、“应”、“不应”、“建议”、“不建议”、“可”和“可选”应按照BCP 14、RFC 2119[RFC2119]中的说明进行解释。
This document makes use of the Broadband Forum technical report "Management Framework for xDSL Bonding" [TR-159], defining a management model and a hierarchy of management objects for the bonded xDSL interfaces.
本文件利用宽带论坛技术报告“xDSL绑定管理框架”[TR-159]，定义了绑定xDSL接口的管理模型和管理对象层次结构。
This section outlines the relationship of the MIB modules defined in this document with other MIB modules described in the relevant RFCs. Specifically, the following MIB modules are discussed: the Interfaces Group MIB (IF-MIB) and the G.Bond MIB (GBOND-MIB).
本节概述了本文档中定义的MIB模块与相关RFC中描述的其他MIB模块之间的关系。具体来说，将讨论以下MIB模块：接口组MIB（IF-MIB）和G.Bond MIB（GBOND-MIB）。
A G.Bond/TDIM port is a private case of a bonded multi-pair xDSL interface and as such is managed using generic interface management objects defined in the IF-MIB [RFC2863]. In particular, an interface index (ifIndex) is used to index instances of G.Bond/TDIM ports, as well as xDSL lines/channels, in a managed system.
G.Bond/TDIM端口是绑定多对xDSL接口的私有情况，因此使用IF-MIB[RFC2863]中定义的通用接口管理对象进行管理。特别是，接口索引（ifIndex）用于索引受管系统中G.Bond/TDIM端口以及xDSL线路/通道的实例。
The GBOND-MIB module [RFC6765] defines management objects common for all bonded multi-pair xDSL interfaces. In particular, it describes the bonding management, bonded port and channel configuration, initialization sequence, etc.
GBOND-MIB模块[RFC6765]定义了所有绑定多对xDSL接口的通用管理对象。特别描述了绑定管理、绑定端口和通道配置、初始化顺序等。
Both the GBOND-MIB and G9983-MIB modules are REQUIRED to manage a G.Bond/TDIM port.
GBOND-MIB和G9983-MIB模块都需要管理G.Bond/TDIM端口。
All management objects defined in the G9983-MIB module are contained in a single group g9983Port. This group is further split into 6 sub-groups, structured as recommended by RFC 4181 [RFC4181]:
G9983-MIB模块中定义的所有管理对象都包含在单个组G9983端口中。该组进一步分为6个子组，结构如RFC 4181[RFC4181]所建议：
o g9983PortNotifications - containing notifications (TDIM Service 'down'/'up').
o g9983PortNotifications-包含通知（TDIM服务“向下”/“向上”）。
o g9983PortConfTable - containing objects for configuration of a G.Bond/TDIM port.
o g9983PortConfTable-包含用于配置G.Bond/TDIM端口的对象。
o g9983PortCapTable - containing objects reflecting capabilities of a G.Bond/TDIM port.
o g9983PortCapTable-包含反映G.Bond/TDIM端口功能的对象。
o g9983PortStatTable - containing objects providing overall status information of a G.Bond/TDIM port, complementing the generic status information from the ifTable of the IF-MIB and the gBondPortStatFltStatus of GBOND-MIB.
o g9983PortStatTable—包含提供G.Bond/TDIM端口总体状态信息的对象，补充了IF-MIB的ifTable和GBOND-MIB的gBondPortStatFltStatus中的通用状态信息。
o g9983SvcTable - containing objects for configuration and status of the services in a G.Bond/TDIM port.
o g9983SvcTable-包含用于G.Bond/TDIM端口中服务的配置和状态的对象。
o g9983PM - containing objects for OPTIONAL historical Performance Monitoring (PM) of a G.Bond/TDIM port.
o g9983PM-包含用于G.Bond/TDIM端口可选历史性能监控（PM）的对象。
The G.Bond/TDIM specification allows an optional Forward Error Correction (FEC) and Interleaver block, which if supported and enabled provides a degree of protection against micro-interruptions, alien noise, and even individual Bonding Channel Entity (BCE) failures, a.k.a. cut-line protection.
G.Bond/TDIM规范允许一个可选的前向纠错（FEC）和交织器块，如果支持和启用，它可以提供一定程度的保护，防止微中断、外来噪声，甚至单个键合通道实体（BCE）故障，也称为截断线保护。
Management objects in the g9983PortConfTable can be used to configure and query the FEC and Interleaver function of the G.Bond/TDIM port.
g9983PortConfTable中的管理对象可用于配置和查询G.Bond/TDIM端口的FEC和交织器功能。
Unlike the other two xDSL Multi-Pair Bonding schemes (G.Bond/ATM and G.Bond/Ethernet), which send the information required for reassembly of the fragmented data along with the data, G.Bond/TDIM is a synchronous scheme, requiring both ends to know the data distribution tables before any actual data transfer can happen.
与其他两种xDSL多对绑定方案（G.Bond/ATM和G.Bond/Ethernet）不同，G.Bond/TDIM是一种同步方案，要求两端在任何实际数据传输发生之前都知道数据分布表。
Management objects in the g9983PortConfTable (g9983PortConfAdminServices), g9983SvcTable, and g9983OperSvcTable can be used to configure and query the configuration of services transported via the G.Bond/TDIM link. The services may be configured independently of the link state (i.e., in-service and out-of-service), as G.998.3 communicates changes in the service configuration via specific Bonding Communication Channel (BCC) messages, switching both ends of the link to the new configuration synchronously.
g9983PortConfTable（g9983PortConfAdminServices）、g9983SvcTable和g9983OperSvcTable中的管理对象可用于配置和查询通过G.Bond/TDIM链接传输的服务的配置。服务可独立于链路状态进行配置（即，服务中和服务外），因为G.998.3通过特定绑定通信信道（BCC）消息传达服务配置的变化，同步地将链路两端切换到新配置。
There can be up to 60 active services defined on a G.Bond/TDIM link. This MIB module provides an ability to define up to 255 services via the g9983SvcTable, with each row representing a possible service, and then set the actual service configuration using the g9983PortConfAdminServices object (a byte-vector of service indices), listing the active services in the order of their position in the G.Bond/TDIM frame. This design allows one to easily modify service drop priority, which directly corresponds to the service position.
G.Bond/TDIM链路上最多可定义60个活动服务。此MIB模块能够通过g9983SvcTable定义多达255个服务，每一行表示一个可能的服务，然后使用g9983PortConfAdminServices对象（服务索引的字节向量）设置实际服务配置，并按照活动服务在G.Bond/TDIM框中的位置顺序列出它们。该设计允许用户轻松修改直接对应于服务位置的服务丢弃优先级。
The actual list of services is provided via the read-only g9983OperSvcTable, where each entry's index corresponds to the service position, starting from index 1 for the first entry, 2 for the second entry, etc., providing an easy service navigation for a management application using GET-NEXT (instead of counting bytes in the g9983PortConfAdminServices object).
实际服务列表通过只读g9983OperSvcTable提供，其中每个条目的索引对应于服务位置，从第一个条目的索引1开始，第二个条目的索引2开始，等等，使用GET-NEXT为管理应用程序提供简单的服务导航（而不是计算g9983PortConfAdminServices对象中的字节数）。
The service configuration can only be changed on a Bonding Terminating Unit at the Central Office (BTU-C).
只能在中央局（BTU-C）的连接终端上更改服务配置。
When configuring the services, please bear in mind that the sum of all the services' bandwidth SHOULD be less than or equal to the target data rate of the bonded link. Note that G.Bond/TDIM links are symmetrical; i.e., their upstream data rate equals the downstream data rate.
在配置服务时，请记住，所有服务的带宽总和应小于或等于绑定链路的目标数据速率。注意，G.Bond/TDIM链路是对称的；i、 例如，它们的上游数据速率等于下游数据速率。
5.3.1. Management of TDM Services and Service Drop Priority during Bandwidth Degradation
5.3.1. 带宽降级期间TDM服务和服务丢弃优先级的管理
The G.Bond/TDIM protocol provides an ability to map TDM services into the TDIM bonded link directly, without any additional overhead. It addresses only structure-agnostic TDM transport, disregarding any structure that may be imposed on these streams, in particular, the structure imposed by the standard TDM framing [G.704].
G.Bond/TDIM协议提供了将TDM服务直接映射到TDIM绑定链路的能力，而无需任何额外开销。它只涉及结构无关的TDM传输，而不考虑可能施加在这些流上的任何结构，特别是标准TDM帧施加的结构[G.704]。
During bandwidth degradation, services with a lower priority are impaired or dropped first. Synchronous services (fractional DS1/E1, clear channel E1/T1, T3/E3, clock) that are positioned in the beginning of the G.Bond/TDIM frame have higher priority than asynchronous services (Ethernet, ATM, Generic Framing Procedure (GFP) encapsulated) that are positioned farther away. Within the services of the same type, those with a lower position (index) have higher priority.
在带宽降级期间，优先级较低的服务首先受到损害或丢弃。位于G.Bond/TDIM帧开头的同步服务（分数DS1/E1、清晰通道E1/T1、T3/E3、时钟）比位于更远位置的异步服务（以太网、ATM、封装的通用成帧过程（GFP））具有更高的优先级。在相同类型的服务中，位置（索引）较低的服务具有较高的优先级。
This MIB module provides specific 'up'/'down' notifications (g9983SvcUp/g9983SvcDown) for each of the configured services. During bandwidth degradation, a number of services may be suspended (dropped) simultaneously, according to their drop priority (position in the service list). Please note that it is possible for a higher-priority service to be dropped before a lower-priority one. For example, suppose there are two services configured on a 2-Mbps G.Bond/TDIM link: a T1 service (g9983SvcType with a value of ds1, with a bandwidth requirement of 1.5 Mbps), and an Ethernet service with a size of 0.5 Mbps. When the actual link bandwidth is reduced to 1.4 Mbps, the T1 service with a g9983OperSvcPosition value of 1 would be dropped, while the Ethernet service with a g9983OperSvcPosition value of 2 would remain up.
此MIB模块为每个配置的服务提供特定的“向上”/“向下”通知（g9983SvcUp/G9983SVDOWN）。在带宽降级期间，根据服务的丢弃优先级（在服务列表中的位置），可以同时挂起（丢弃）多个服务。请注意，优先级较高的服务可能会在优先级较低的服务之前放弃。例如，假设在2-Mbps G.Bond/TDIM链路上配置了两个服务：T1服务（值为ds1的g9983SvcType，带宽要求为1.5 Mbps）和大小为0.5 Mbps的以太网服务。当实际链路带宽降低到1.4 Mbps时，G9983OpersCposition值为1的T1服务将被丢弃，而G9983OpersCposition值为2的以太网服务将保持正常。
Notifications SHOULD be rate-limited (throttled) such that there is an implementation-specific gap between the generation of consecutive notifications of the same event. This mechanism prevents "notification flooding" in cases where g9983OperSvcState oscillates between the 'up' and 'down' states. When notifications are rate-limited, they are dropped and not queued for sending at a future time. This is intended to be a general rate-limiting statement for notifications that otherwise have no explicit rate-limiting assertions in this document.
通知应具有速率限制（限制），以便在生成同一事件的连续通知之间存在特定于实现的间隔。当G99838状态在“向上”和“向下”状态之间振荡时，此机制可防止“通知洪泛”。当通知受速率限制时，它们将被丢弃，而不会排队等待将来发送。对于本文档中没有明确速率限制断言的通知，这是一个通用的速率限制声明。
The OPTIONAL Performance Monitoring counters, thresholds, and history buckets (interval-counters), similar to those defined in [TR-159], are implemented using the textual conventions defined in the HC-PerfHist-TC-MIB [RFC3705]. The HC-PerfHist-TC-MIB defines 64-bit versions of the textual conventions found in the PerfHist-TC-MIB [RFC3593].
与[TR-159]中定义的计数器类似，可选性能监控计数器、阈值和历史存储桶（间隔计数器）使用HC PerfHist TC MIB[RFC3705]中定义的文本约定实现。HC PerfHist TC MIB定义了PerfHist TC MIB[RFC3593]中的文本约定的64位版本。
The agent SHOULD align the beginning of each interval to a fifteen-minute boundary of a wall clock. Likewise, the beginning of each one-day interval SHOULD be aligned with the start of a day.
代理应将每个间隔的开始与挂钟的15分钟边界对齐。同样，每一天间隔的开始应该与一天的开始保持一致。
Counters are not reset when a G.Bond TDIM port is re-initialized, but rather only when the agent is reset or re-initialized.
当G.Bond TDIM端口重新初始化时，计数器不会重置，而仅当代理重置或重新初始化时才会重置。
Note that the accumulation of certain performance events for a monitored entity is inhibited (counting stops) during periods of service unavailability on that entity. The DESCRIPTION clause of Performance Monitoring counters in this MIB module specifies which of the counters are inhibited during periods of service unavailability.
请注意，受监控实体的某些性能事件的累积在该实体的服务不可用期间被禁止（计数停止）。此MIB模块中性能监视计数器的DESCRIPTION子句指定在服务不可用期间禁止哪些计数器。
5.5. Mapping of Broadband Forum TR-159 and ITU-T G.998.3 Managed Objects
5.5. 宽带论坛TR-159和ITU-T G.998.3托管对象的映射
This section contains the mapping between relevant managed objects (attributes) defined in [TR-159] and the managed objects defined in this document. Note that all management objects defined in [G.998.3] have corresponding objects in [TR-159].
本节包含[TR-159]中定义的相关托管对象（属性）与本文档中定义的托管对象之间的映射。请注意，[G.998.3]中定义的所有管理对象在[TR-159]中都有相应的对象。
+------------------------------+---------------------------------------+
| TR-159 Managed Object | Corresponding SNMP Object |
+------------------------------+---------------------------------------+
| oBondTDIM - Basic Package | |
| (Mandatory) | |
+------------------------------+---------------------------------------+
| aCRC4Errors | g9983PortStatCrc4Errors |
+------------------------------+---------------------------------------+
| aCRC6Errors | g9983PortStatCrc6Errors |
+------------------------------+---------------------------------------+
| aCRC8Errors | g9983PortStatCrc8Errors |
+------------------------------+---------------------------------------+
| aFECSupported | g9983PortCapFecSupported |
+------------------------------+---------------------------------------+
+------------------------------+---------------------------------------+
| TR-159 Managed Object | Corresponding SNMP Object |
+------------------------------+---------------------------------------+
| oBondTDIM - Basic Package | |
| (Mandatory) | |
+------------------------------+---------------------------------------+
| aCRC4Errors | g9983PortStatCrc4Errors |
+------------------------------+---------------------------------------+
| aCRC6Errors | g9983PortStatCrc6Errors |
+------------------------------+---------------------------------------+
| aCRC8Errors | g9983PortStatCrc8Errors |
+------------------------------+---------------------------------------+
| aFECSupported | g9983PortCapFecSupported |
+------------------------------+---------------------------------------+
+------------------------------+---------------------------------------+
| oBondTDIM - FEC Package | |
| (Optional) | |
+------------------------------+---------------------------------------+
| aFECAdminState | g9983PortConfFecAdminState |
+------------------------------+---------------------------------------+
| aFECOperState | g9983PortStatFecOperState |
+------------------------------+---------------------------------------+
| aFECWordSize | g9983PortConfFecWordSize |
+------------------------------+---------------------------------------+
| aFECRedundancySize | g9983PortConfFecRedundancySize |
+------------------------------+---------------------------------------+
| aFECInterleaverType | g9983PortConfFecInterleaverType |
+------------------------------+---------------------------------------+
| aFECInterleaverDepth | g9983PortConfFecInterleaverDepth |
+------------------------------+---------------------------------------+
| aFECMaxWordSize | g9983PortCapFecMaxWordSize |
+------------------------------+---------------------------------------+
| aFECMaxRedundancySize | g9983PortCapFecMaxRedundancySize |
+------------------------------+---------------------------------------+
| aFECInterleaverTypesSupported|g9983PortCapFecInterleaverTypeSupported|
+------------------------------+---------------------------------------+
| aFECMaxInterleaverDepth | g9983PortCapFecMaxInterleaverDepth |
+------------------------------+---------------------------------------+
| oTDIMService - Basic | |
| Package (Mandatory) | |
+------------------------------+---------------------------------------+
| aServiceID | g9983OperSvcPosition |
+------------------------------+---------------------------------------+
| aServiceIfIdx | g9983SvcIfIdx |
+------------------------------+---------------------------------------+
| aServiceType | g9983SvcType |
+------------------------------+---------------------------------------+
| aServiceSize | g9983SvcSize |
+------------------------------+---------------------------------------+
| aServiceOperState | g9983OperSvcState |
+------------------------------+---------------------------------------+
| aServiceUpDownEnable | g9983PortConfSvcUpDownEnable |
+------------------------------+---------------------------------------+
| nServiceUp | g9983SvcUp |
+------------------------------+---------------------------------------+
| nServiceDown | g9983SvcDown |
+------------------------------+---------------------------------------+
+------------------------------+---------------------------------------+
| oBondTDIM - FEC Package | |
| (Optional) | |
+------------------------------+---------------------------------------+
| aFECAdminState | g9983PortConfFecAdminState |
+------------------------------+---------------------------------------+
| aFECOperState | g9983PortStatFecOperState |
+------------------------------+---------------------------------------+
| aFECWordSize | g9983PortConfFecWordSize |
+------------------------------+---------------------------------------+
| aFECRedundancySize | g9983PortConfFecRedundancySize |
+------------------------------+---------------------------------------+
| aFECInterleaverType | g9983PortConfFecInterleaverType |
+------------------------------+---------------------------------------+
| aFECInterleaverDepth | g9983PortConfFecInterleaverDepth |
+------------------------------+---------------------------------------+
| aFECMaxWordSize | g9983PortCapFecMaxWordSize |
+------------------------------+---------------------------------------+
| aFECMaxRedundancySize | g9983PortCapFecMaxRedundancySize |
+------------------------------+---------------------------------------+
| aFECInterleaverTypesSupported|g9983PortCapFecInterleaverTypeSupported|
+------------------------------+---------------------------------------+
| aFECMaxInterleaverDepth | g9983PortCapFecMaxInterleaverDepth |
+------------------------------+---------------------------------------+
| oTDIMService - Basic | |
| Package (Mandatory) | |
+------------------------------+---------------------------------------+
| aServiceID | g9983OperSvcPosition |
+------------------------------+---------------------------------------+
| aServiceIfIdx | g9983SvcIfIdx |
+------------------------------+---------------------------------------+
| aServiceType | g9983SvcType |
+------------------------------+---------------------------------------+
| aServiceSize | g9983SvcSize |
+------------------------------+---------------------------------------+
| aServiceOperState | g9983OperSvcState |
+------------------------------+---------------------------------------+
| aServiceUpDownEnable | g9983PortConfSvcUpDownEnable |
+------------------------------+---------------------------------------+
| nServiceUp | g9983SvcUp |
+------------------------------+---------------------------------------+
| nServiceDown | g9983SvcDown |
+------------------------------+---------------------------------------+
Table 1: Mapping of TR-159 Managed Objects
表1:TR-159托管对象的映射
Note that some of the mapping between the objects defined in TR-159 and the ones defined in this MIB module is not one-to-one; for example, while TR-159 PM attributes aGroupPerf* map to the corresponding gBondPortPm* objects of the GBOND-MIB module, there are no dedicated PM attributes for the g9983PortPm* and g9983SvcPm* objects introduced in this MIB module. However, since their definition is identical to the definition of gBondPortPm* objects of the GBOND-MIB module, we can map g9983PortPm* and g9983SvcPm* to the relevant aGroupPerf* attributes of TR-159 and use the term 'partial mapping' to denote the fact that this mapping is not one-to-one.
请注意，TR-159中定义的对象与此MIB模块中定义的对象之间的某些映射不是一对一的；例如，虽然TR-159 PM属性AGROPPERF*映射到GBOND-MIB模块的相应gBondPortPm*对象，但此MIB模块中引入的g9983PortPm*和g9983SvcPm*对象没有专用的PM属性。但是，由于它们的定义与GBOND-MIB模块的gBondPortPm*对象的定义相同，因此我们可以将g9983PortPm*和g9983SvcPm*映射到TR-159的相关aGroupPerf*属性，并使用术语“部分映射”来表示此映射不是一对一的事实。
The G9983-MIB module IMPORTS objects from SNMPv2-SMI [RFC2578], SNMPv2-TC [RFC2579], SNMPv2-CONF [RFC2580], IF-MIB [RFC2863], and HC-PerfHist-TC-MIB [RFC3705]. The module has been structured as recommended by [RFC4181].
G9983-MIB模块从SNMPv2 SMI[RFC2578]、SNMPv2 TC[RFC2579]、SNMPv2 CONF[RFC2580]、IF-MIB[RFC2863]和HC PerfHist TC MIB[RFC3705]导入对象。该模块的结构符合[RFC4181]的建议。
G9983-MIB DEFINITIONS ::= BEGIN
G9983-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
mib-2,
Unsigned32,
Counter32
FROM SNMPv2-SMI -- RFC 2578
TEXTUAL-CONVENTION,
RowStatus,
TruthValue
FROM SNMPv2-TC -- RFC 2579
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF -- RFC 2580
ifIndex,
InterfaceIndex
FROM IF-MIB -- RFC 2863
HCPerfCurrentCount,
HCPerfIntervalCount,
HCPerfValidIntervals,
HCPerfInvalidIntervals,
HCPerfTimeElapsed
FROM HC-PerfHist-TC-MIB -- RFC 3705
;
------------------------------------------------------------------------
g9983MIB MODULE-IDENTITY
LAST-UPDATED "201302200000Z" -- 20 February 2013
ORGANIZATION "IETF ADSL MIB Working Group"
CONTACT-INFO
"WG charter:
http://datatracker.ietf.org/wg/adslmib/charter/
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
mib-2,
Unsigned32,
Counter32
FROM SNMPv2-SMI -- RFC 2578
TEXTUAL-CONVENTION,
RowStatus,
TruthValue
FROM SNMPv2-TC -- RFC 2579
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF -- RFC 2580
ifIndex,
InterfaceIndex
FROM IF-MIB -- RFC 2863
HCPerfCurrentCount,
HCPerfIntervalCount,
HCPerfValidIntervals,
HCPerfInvalidIntervals,
HCPerfTimeElapsed
FROM HC-PerfHist-TC-MIB -- RFC 3705
;
------------------------------------------------------------------------
g9983MIB MODULE-IDENTITY
LAST-UPDATED "201302200000Z" -- 20 February 2013
ORGANIZATION "IETF ADSL MIB Working Group"
CONTACT-INFO
"WG charter:
http://datatracker.ietf.org/wg/adslmib/charter/
Mailing Lists:
General Discussion: adslmib@ietf.org
To Subscribe: adslmib-request@ietf.org
In Body: subscribe your_email_address
Mailing Lists:
General Discussion: adslmib@ietf.org
To Subscribe: adslmib-request@ietf.org
In Body: subscribe your_email_address
Chair: Menachem Dodge Postal: ECI Telecom, Ltd. 30 Hasivim St. Petach-Tikva 4951169 Israel Phone: +972-3-926-8421 EMail: menachemdodge1@gmail.com
主席：梅纳赫姆·道奇邮政：ECI电信有限公司30 Hasivim St.Petach Tikva 4951169以色列电话：+972-3-926-8421电子邮件：menachemdodge1@gmail.com
Editor: Edward Beili Postal: Actelis Networks, Inc. 25 Bazel St., P.O.B. 10173 Petach-Tikva 49103 Israel Phone: +972-3-924-3491 EMail: edward.beili@actelis.com"
编辑：Edward Beili Postal:Actelis Networks，Inc.巴泽尔街25号，邮编：10173 Petach Tikva 49103以色列电话：+972-3-924-3491电子邮件：Edward。beili@actelis.com"
DESCRIPTION "The objects in this MIB module are used to manage the multi-pair bonded xDSL interfaces using time-division inverse multiplexing (TDIM), as defined in ITU-T Recommendation G.998.3 (G.Bond/TDIM).
描述“此MIB模块中的对象用于使用时分反向复用（TDIM）管理多对绑定xDSL接口，如ITU-T建议G.998.3（G.Bond/TDIM）中所定义。
This MIB module MUST be used in conjunction with the GBOND-MIB module, common to all G.Bond technologies.
该MIB模块必须与GBOND-MIB模块一起使用，这是所有G.Bond技术的通用模块。
The following references are used throughout this MIB module:
此MIB模块中使用了以下参考：
[G.998.3] refers to: ITU-T Recommendation G.998.3: 'Multi-pair bonding using time-division inverse multiplexing', January 2005.
[G.998.3]参考：ITU-T建议G.998.3:“使用时分反向多路复用的多对键合”，2005年1月。
[TR-159] refers to: Broadband Forum Technical Report: 'Management Framework for xDSL Bonding', December 2008.
[TR-159]参考：宽带论坛技术报告：“xDSL连接管理框架”，2008年12月。
Naming Conventions: BCE - Bonding Channel Entity BTU - Bonding Terminating Unit BTU-C - Bonding Terminating Unit, CO side BTU-R - Bonding Terminating Unit, Remote Terminal (CPE) side CO - Central Office CPE - Customer Premises Equipment GBS - Generic Bonding Sub-layer GBS-C - Generic Bonding Sub-layer, CO side GBS-R - Generic Bonding Sub-layer, Remote Terminal (CPE) side SNR - Signal to Noise Ratio
命名约定：BCE-连接通道实体BTU-连接端接单元BTU-C-连接端接单元，CO侧BTU-R-连接端接单元，远程终端（CPE）侧CO-中央办公室CPE-客户场所设备GBS-通用连接子层GBS-C-通用连接子层，CO侧GBS-R-通用连接子层，远程终端（CPE）侧信噪比-信噪比
Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved.
版权所有（c）2013 IETF信托基金和被确定为代码作者的人员。版权所有。
Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info)."
根据IETF信托有关IETF文件的法律规定第4.c节规定的简化BSD许可证中包含的许可条款，允许以源代码和二进制格式重新分发和使用，无论是否修改(http://trustee.ietf.org/license-info)."
REVISION "201302200000Z" -- 20 February 2013 DESCRIPTION "Initial version, published as RFC 6766."
修订版“201302200000Z”-2013年2月20日描述“初始版本，发布为RFC 6766。”
::= { mib-2 210 }
::= { mib-2 210 }
-- Sections of the module
-- Structured as recommended by RFC 4181, Appendix D
-- Sections of the module
-- Structured as recommended by RFC 4181, Appendix D
g9983Objects OBJECT IDENTIFIER ::= { g9983MIB 1 }
g9983Objects OBJECT IDENTIFIER ::= { g9983MIB 1 }
g9983Conformance OBJECT IDENTIFIER ::= { g9983MIB 2 }
g9983Conformance OBJECT IDENTIFIER ::= { g9983MIB 2 }
-- Groups in the module
--模块中的组
g9983Port OBJECT IDENTIFIER ::= { g9983Objects 1 }
g9983Port OBJECT IDENTIFIER ::= { g9983Objects 1 }
-- Textual Conventions
--文本约定
G9983SvcIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each service defined
in the managed G.Bond/TDIM port.
It is RECOMMENDED that values be assigned contiguously
starting from 1. The value for each service MUST remain
constant at least from one re-initialization of the local
management subsystem to the next re-initialization."
SYNTAX Unsigned32 (1..255)
G9983SvcIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each service defined
in the managed G.Bond/TDIM port.
It is RECOMMENDED that values be assigned contiguously
starting from 1. The value for each service MUST remain
constant at least from one re-initialization of the local
management subsystem to the next re-initialization."
SYNTAX Unsigned32 (1..255)
G9983SvcIndexList ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1d:"
STATUS current
DESCRIPTION
"This textual convention represents a continuous ordered list of
all the services defined for the managed G.Bond/TDIM port.
The value of this object is a concatenation of zero or more (up
to 60) octets, where each octet contains an 8-bit
G9983SvcIndex value, identifying a particular service.
G9983SvcIndexList ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1d:"
STATUS current
DESCRIPTION
"This textual convention represents a continuous ordered list of
all the services defined for the managed G.Bond/TDIM port.
The value of this object is a concatenation of zero or more (up
to 60) octets, where each octet contains an 8-bit
G9983SvcIndex value, identifying a particular service.
An octet's position reflects the associated service position and its priority in the G.Bond/TDIM frame, with the first octet being the first service of highest priority.
八位组的位置反映了G.Bond/TDIM帧中的相关服务位置及其优先级，其中第一个八位组是优先级最高的第一个服务。
A zero-length octet string is object-specific and MUST therefore be defined as part of the description of any object that uses this syntax. Examples of the usage of a zero-length value might include situations where an object using this textual convention is irrelevant for a specific G.Bond/TDIM port type or where no services have been defined for this port." SYNTAX OCTET STRING (SIZE (0..60))
长度为零的八位字节字符串是特定于对象的，因此必须定义为使用此语法的任何对象描述的一部分。使用零长度值的示例可能包括以下情况：使用此文本约定的对象与特定的G.Bond/TDIM端口类型无关，或者没有为此端口定义任何服务。“语法八位字符串（大小（0..60））
G9983SvcOrderIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each service defined
in the managed G.Bond/TDIM port, showing its relative position
inside the G.Bond/TDIM frame."
SYNTAX Unsigned32 (1..60)
G9983SvcOrderIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each service defined
in the managed G.Bond/TDIM port, showing its relative position
inside the G.Bond/TDIM frame."
SYNTAX Unsigned32 (1..60)
-- Port Notifications group
--端口通知组
g9983PortNotifications OBJECT IDENTIFIER
::= { g9983Port 0 }
g9983PortNotifications OBJECT IDENTIFIER
::= { g9983Port 0 }
g9983SvcUp NOTIFICATION-TYPE
OBJECTS {
-- ifIndex and g9983OperSvcPosition would be part of the trap OID
g9983OperSvcIdx,
g9983SvcIfIdx
}
STATUS current
DESCRIPTION
"This notification indicates that a service, indicated by the
g9983OperSvcIdx (mapped to a particular interface
indicated by the g9983SvcIfIdx), in a particular
G.Bond/TDIM port is passing traffic.
g9983SvcUp NOTIFICATION-TYPE
OBJECTS {
-- ifIndex and g9983OperSvcPosition would be part of the trap OID
g9983OperSvcIdx,
g9983SvcIfIdx
}
STATUS current
DESCRIPTION
"This notification indicates that a service, indicated by the
g9983OperSvcIdx (mapped to a particular interface
indicated by the g9983SvcIfIdx), in a particular
G.Bond/TDIM port is passing traffic.
This notification is generated (unless disabled or dropped by the rate-limiting mechanism) when the g9983OperSvcState object has left the 'down' state, while the G.Bond/TDIM port state (the ifOperStatus of the IF-MIB) is 'up'.
当g9983OperSvcState对象离开“down”状态，而G.Bond/TDIM端口状态（IF-MIB的ifOperStatus）为“up”时，会生成此通知（除非速率限制机制禁用或丢弃）。
Generation of this notification is controlled by the g9983PortConfSvcUpDownEnable object.
此通知的生成由g9983PortConfSvcUpDownEnable对象控制。
This object maps to the TR-159 notification nServiceUp."
此对象映射到TR-159通知nServiceUp。”
REFERENCE
"[TR-159], Section 5.5.5.7"
::= { g9983PortNotifications 1 }
REFERENCE
"[TR-159], Section 5.5.5.7"
::= { g9983PortNotifications 1 }
g9983SvcDown NOTIFICATION-TYPE
OBJECTS {
-- ifIndex and g9983OperSvcPosition would be part of the trap OID
g9983OperSvcIdx,
g9983SvcIfIdx
}
STATUS current
DESCRIPTION
"This notification indicates that a service indicated by the
g9983OperSvcIdx (mapped to a particular interface
indicated by the g9983SvcIfIdx) in a particular
G.Bond/TDIM port has stopped passing traffic.
g9983SvcDown NOTIFICATION-TYPE
OBJECTS {
-- ifIndex and g9983OperSvcPosition would be part of the trap OID
g9983OperSvcIdx,
g9983SvcIfIdx
}
STATUS current
DESCRIPTION
"This notification indicates that a service indicated by the
g9983OperSvcIdx (mapped to a particular interface
indicated by the g9983SvcIfIdx) in a particular
G.Bond/TDIM port has stopped passing traffic.
This notification is generated (unless disabled or dropped by the rate-limiting mechanism), when the g9983OperSvcState object has entered the 'down' state, while the G.Bond/TDIM port state (the ifOperStatus of the IF-MIB) is 'up'.
当g9983OperSvcState对象进入“down”状态，而G.Bond/TDIM端口状态（IF-MIB的ifOperStatus）为“up”时，会生成此通知（除非速率限制机制禁用或丢弃）。
Generation of this notification is controlled by the g9983PortConfSvcUpDownEnable object.
此通知的生成由g9983PortConfSvcUpDownEnable对象控制。
This object maps to the TR-159 notification nServiceDown."
REFERENCE
"[TR-159], Section 5.5.5.8"
::= { g9983PortNotifications 2 }
This object maps to the TR-159 notification nServiceDown."
REFERENCE
"[TR-159], Section 5.5.5.8"
::= { g9983PortNotifications 2 }
-- G.Bond/TDIM Port group
--G.Bond/TDIM端口组
g9983PortConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983PortConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for configuration of G.Bond/TDIM ports. Entries in
this table MUST be maintained in a persistent manner."
::= { g9983Port 1 }
g9983PortConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983PortConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for configuration of G.Bond/TDIM ports. Entries in
this table MUST be maintained in a persistent manner."
::= { g9983Port 1 }
g9983PortConfEntry OBJECT-TYPE SYNTAX G9983PortConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the G.Bond/TDIM Port Configuration table. Each entry represents a G.Bond/TDIM port indexed by the
G9983PortConentry对象类型语法G9983PortConentry MAX-ACCESS不可访问状态当前描述“G.Bond/TDIM端口配置表中的一个条目。每个条目表示由
ifIndex. Additional configuration parameters are available
via the gBondPortConfEntry of the GBOND-MIB.
Note that a G.Bond/TDIM port runs on top of a single or
multiple BCE port(s), which are also indexed by the ifIndex."
INDEX { ifIndex }
::= { g9983PortConfTable 1 }
ifIndex. Additional configuration parameters are available
via the gBondPortConfEntry of the GBOND-MIB.
Note that a G.Bond/TDIM port runs on top of a single or
multiple BCE port(s), which are also indexed by the ifIndex."
INDEX { ifIndex }
::= { g9983PortConfTable 1 }
G9983PortConfEntry ::=
SEQUENCE {
g9983PortConfFecAdminState TruthValue,
g9983PortConfFecWordSize Unsigned32,
g9983PortConfFecRedundancySize Unsigned32,
g9983PortConfFecInterleaverType INTEGER,
g9983PortConfFecInterleaverDepth Unsigned32,
g9983PortConfAdminServices G9983SvcIndexList,
g9983PortConfSvcUpDownEnable TruthValue
}
G9983PortConfEntry ::=
SEQUENCE {
g9983PortConfFecAdminState TruthValue,
g9983PortConfFecWordSize Unsigned32,
g9983PortConfFecRedundancySize Unsigned32,
g9983PortConfFecInterleaverType INTEGER,
g9983PortConfFecInterleaverDepth Unsigned32,
g9983PortConfAdminServices G9983SvcIndexList,
g9983PortConfSvcUpDownEnable TruthValue
}
g9983PortConfFecAdminState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A desired state of the OPTIONAL Forward Error Correction (FEC) function of the G.Bond/TDIM port.
g9983PortConfFecAdminState对象类型语法TruthValue MAX-ACCESS读写状态当前描述“G.Bond/TDIM端口可选前向纠错（FEC）功能的所需状态。
A value of 'false' indicates that the FEC function SHALL be disabled. A value of 'true' indicates that the FEC function SHALL be enabled, if supported by the G.Bond/TDIM port, as indicated by the g9983PortCapFecSupported object. The g9983PortStatFecOperState object indicates the current operational state of the FEC function.
值“false”表示应禁用FEC功能。如g9983PortCapFecSupported对象所示，如果G.Bond/TDIM端口支持FEC功能，则值“true”表示应启用FEC功能。g9983PortStatFecOperState对象表示FEC函数的当前操作状态。
For the GBS-R ports, the value of this object cannot be changed directly. This value may be changed as a result of a write operation on the g9983PortCapFecSupported object of a remote GBS-C.
对于GBS-R端口，无法直接更改此对象的值。远程GBS-C的g9983PortCapFecSupported对象上的写入操作可能会更改此值。
Modifications of this object MUST be performed when the link is 'down'. Attempts to change this object MUST be rejected if the link is 'up' or initializing, or if it is a GBS-R.
必须在链接“关闭”时修改此对象。如果链接处于“启动”或正在初始化状态，或者是GBS-R，则必须拒绝更改此对象的尝试。
This object maps to the TR-159/G.998.3 attribute aFECAdminState."
REFERENCE
"[TR-159], Section 5.5.4.5; [G.998.3], Appendix II, B-X"
::= { g9983PortConfEntry 1 }
This object maps to the TR-159/G.998.3 attribute aFECAdminState."
REFERENCE
"[TR-159], Section 5.5.4.5; [G.998.3], Appendix II, B-X"
::= { g9983PortConfEntry 1 }
g9983PortConfFecWordSize OBJECT-TYPE SYNTAX Unsigned32 (0|20..255) UNITS "octets" MAX-ACCESS read-write STATUS current DESCRIPTION "A FEC code word size, in octets, for G.Bond/TDIM ports supporting the FEC function.
g9983PortConfFecWordSize对象类型语法Unsigned32（0 | 20..255）单位“八位字节”最大访问读写状态当前描述“用于支持FEC功能的G.Bond/TDIM端口的FEC码字大小（八位字节）。
This object is read-write for the GBS-C ports and read-only for the GBS-R.
此对象对于GBS-C端口为读写，对于GBS-R端口为只读。
A value of zero SHALL be returned if the FEC function is disabled (via g9983PortConfFecAdminState) or not supported.
如果FEC功能被禁用（通过g9983PortConfFecAdminState）或不受支持，则应返回零值。
Changing of the FEC code word size MUST be performed when the FEC-enabled link is 'down'. Attempts to change this object MUST be rejected if the link is 'up' or initializing or if the FEC function is disabled/not supported.
当启用FEC的链路“关闭”时，必须更改FEC码字大小。如果链接处于“启动”或正在初始化状态，或者如果禁用/不支持FEC功能，则必须拒绝更改此对象的尝试。
This object maps to the TR-159/G.998.3 attribute aFECWordSize."
REFERENCE
"[TR-159], Section 5.5.4.7; [G.998.3], Appendix II, B-XI"
::= { g9983PortConfEntry 2 }
This object maps to the TR-159/G.998.3 attribute aFECWordSize."
REFERENCE
"[TR-159], Section 5.5.4.7; [G.998.3], Appendix II, B-XI"
::= { g9983PortConfEntry 2 }
g9983PortConfFecRedundancySize OBJECT-TYPE SYNTAX Unsigned32 (0|2|4|8|16|20) UNITS "octets" MAX-ACCESS read-write STATUS current DESCRIPTION "A FEC redundancy word size, in octets, for G.Bond/TDIM ports supporting the FEC function.
G9983PortConfectRedundancysize对象类型语法Unsigned32（0 | 2 | 4 | 8 | 16 | 20）单位“八位字节”最大访问读写状态当前描述“用于支持FEC功能的G.Bond/TDIM端口的FEC冗余字大小，以八位字节为单位。
This object is read-write for the GBS-C ports and read-only for the GBS-R.
此对象对于GBS-C端口为读写，对于GBS-R端口为只读。
A value of zero SHALL be returned if the FEC function is disabled (via g9983PortConfFecAdminState) or not supported.
如果FEC功能被禁用（通过g9983PortConfFecAdminState）或不受支持，则应返回零值。
Changing of the FEC redundancy word size MUST be performed when the FEC-enabled link is 'down'. Attempts to change this object MUST be rejected if the link is 'up' or initializing or if the FEC function is disabled/not supported.
当启用FEC的链路“关闭”时，必须更改FEC冗余字大小。如果链接处于“启动”或正在初始化状态，或者如果禁用/不支持FEC功能，则必须拒绝更改此对象的尝试。
This object maps to the TR-159/G.998.3 attribute aFECRedundancySize."
此对象映射到TR-159/G.998.3属性的增量大小。”
REFERENCE
"[TR-159], Section 5.5.4.8; [G.998.3], Appendix II, B-XII"
::= { g9983PortConfEntry 3 }
REFERENCE
"[TR-159], Section 5.5.4.8; [G.998.3], Appendix II, B-XII"
::= { g9983PortConfEntry 3 }
g9983PortConfFecInterleaverType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
block(1),
convolution(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An Interleaver type for G.Bond/TDIM ports supporting the
FEC function.
g9983PortConfFecInterleaverType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
block(1),
convolution(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An Interleaver type for G.Bond/TDIM ports supporting the
FEC function.
This object is read-write for the GBS-C ports and read-only for the GBS-R.
此对象对于GBS-C端口为读写，对于GBS-R端口为只读。
A value of none(0) SHALL be returned if the FEC function is disabled (via g9983PortConfFecAdminState) or not supported.
如果FEC功能被禁用（通过g9983PortConfFecAdminState）或不受支持，则应返回none（0）值。
Changing of the Interleaver type MUST be performed when the FEC-enabled link is 'down'. Attempts to change this object MUST be rejected if the link is 'up' or initializing or if the FEC function is disabled/not supported.
当启用FEC的链路“关闭”时，必须执行交织器类型的更改。如果链接处于“启动”或正在初始化状态，或者如果禁用/不支持FEC功能，则必须拒绝更改此对象的尝试。
This object maps to the TR-159/G.998.3 attribute
aFECInterleaverType."
REFERENCE
"[TR-159], Section 5.5.4.9; [G.998.3], Appendix II, B-XIII"
::= { g9983PortConfEntry 4 }
This object maps to the TR-159/G.998.3 attribute
aFECInterleaverType."
REFERENCE
"[TR-159], Section 5.5.4.9; [G.998.3], Appendix II, B-XIII"
::= { g9983PortConfEntry 4 }
g9983PortConfFecInterleaverDepth OBJECT-TYPE SYNTAX Unsigned32 (0|1|2|3|4|6|8|12|16|24|32|48|96) MAX-ACCESS read-write STATUS current DESCRIPTION "An Interleaver depth for G.Bond/TDIM ports supporting the FEC function.
G9983PortConfectInterleaverDepth对象类型语法Unsigned32（0 | 1 | 2 | 3 | 4 | 6 | 8 | 12 | 16 | 24 | 32 | 48 | 96）MAX-ACCESS读写状态当前描述“支持FEC功能的G.Bond/TDIM端口的交织器深度。
This object is read-write for the GBS-C ports and read-only for the GBS-R.
此对象对于GBS-C端口为读写，对于GBS-R端口为只读。
A value of zero SHALL be returned if the FEC function is disabled (via g9983PortConfFecAdminState) or not supported.
如果FEC功能被禁用（通过g9983PortConfFecAdminState）或不受支持，则应返回零值。
Changing of the Interleaver depth MUST be performed when the FEC-enabled link is 'down'. Attempts to change this object MUST be rejected if the link is 'up' or initializing or if the FEC function is disabled/not supported.
当启用FEC的链路“关闭”时，必须执行交织器深度的更改。如果链接处于“启动”或正在初始化状态，或者如果禁用/不支持FEC功能，则必须拒绝更改此对象的尝试。
This object maps to the TR-159/G.998.3 attribute
aFECInterleaverDepth."
REFERENCE
"[TR-159], Section 5.5.4.10; [G.998.3], Appendix II, B-XIV"
::= { g9983PortConfEntry 5 }
This object maps to the TR-159/G.998.3 attribute
aFECInterleaverDepth."
REFERENCE
"[TR-159], Section 5.5.4.10; [G.998.3], Appendix II, B-XIV"
::= { g9983PortConfEntry 5 }
g9983PortConfAdminServices OBJECT-TYPE SYNTAX G9983SvcIndexList MAX-ACCESS read-write STATUS current DESCRIPTION "Desired list of services for a G.Bond/TDIM port. This object is a list of pointers to entries in the g9983SvcTable.
g9983PortConfAdminServices对象类型语法G9983SvIndexList MAX-ACCESS读写状态当前描述“G.Bond/TDIM端口所需的服务列表。此对象是指向g9983SvcTable中条目的指针列表。
The value of this object is a continuous ordered list of up to 60 indices (g9983SvcIdx) of the active services carried via the G.Bond/TDIM link. The position of a service in the list determines its relative priority in cases of bandwidth degradation -- the priority decreases towards the end of the list, which means that the last service in the list would be suspended first when the bandwidth degrades.
此对象的值是一个连续的有序列表，最多包含通过G.Bond/TDIM链路承载的活动服务的60个索引（g9983SvcIdx）。服务在列表中的位置决定了其在带宽下降情况下的相对优先级——优先级在接近列表末尾时降低，这意味着当带宽下降时，列表中的最后一个服务将首先暂停。
This object is writable and readable for the GBS-C ports. It is irrelevant for the GBS-R ports -- a zero-length octet string SHALL be returned on an attempt to read this object, and an attempt to change this object MUST be rejected in this case.
此对象对于GBS-C端口是可写和可读的。这与GBS-R端口无关——尝试读取此对象时应返回零长度的八位字节字符串，在这种情况下，更改此对象的尝试必须被拒绝。
Note that the current operational service list is available via the g9983OperSvcTable object.
请注意，当前操作服务列表可通过g9983OperSvcTable对象获得。
This object for a GBS-C port MAY be modified independently of
the link's state, i.e., in-service and out-of-service.
Attempts to set this object to a list with a member value that
is not the value of the index for an active entry in the
corresponding g9983SvcTable table MUST be rejected."
REFERENCE
"[G.998.3], Sections 10.2.3, 13.3.4.6-13.3.4.11"
::= { g9983PortConfEntry 6 }
This object for a GBS-C port MAY be modified independently of
the link's state, i.e., in-service and out-of-service.
Attempts to set this object to a list with a member value that
is not the value of the index for an active entry in the
corresponding g9983SvcTable table MUST be rejected."
REFERENCE
"[G.998.3], Sections 10.2.3, 13.3.4.6-13.3.4.11"
::= { g9983PortConfEntry 6 }
g9983PortConfSvcUpDownEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current
g9983PortConfSvcUpDownEnable对象类型语法TruthValue最大访问读写状态当前
DESCRIPTION "Indicates whether g9983SvcUp and g9983SvcDown notifications should be generated for this interface.
DESCRIPTION“指示是否应为此接口生成g9983SvcUp和G9983SVDOWN通知。
A value of true(1) indicates that the notifications are enabled. A value of false(2) indicates that the notifications are disabled.
值为true（1）表示已启用通知。值false（2）表示已禁用通知。
This object maps to the TR-159 attribute
aServiceUpDownEnable."
REFERENCE
"[TR-159], Section 5.5.5.6"
::= { g9983PortConfEntry 7 }
This object maps to the TR-159 attribute
aServiceUpDownEnable."
REFERENCE
"[TR-159], Section 5.5.5.6"
::= { g9983PortConfEntry 7 }
g9983PortCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983PortCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for capabilities of G.Bond/TDIM ports. Entries in this
table MUST be maintained in a persistent manner."
::= { g9983Port 2 }
g9983PortCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983PortCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for capabilities of G.Bond/TDIM ports. Entries in this
table MUST be maintained in a persistent manner."
::= { g9983Port 2 }
g9983PortCapEntry OBJECT-TYPE
SYNTAX G9983PortCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port Capability table.
Each entry represents a G.Bond/TDIM port indexed by the
ifIndex. Additional capabilities are available via the
gBondPortCapabilityEntry of the GBOND-MIB.
Note that a G.Bond/TDIM port runs on top of a single
or multiple BCE port(s), which are also indexed by the ifIndex."
INDEX { ifIndex }
::= { g9983PortCapTable 1 }
g9983PortCapEntry OBJECT-TYPE
SYNTAX G9983PortCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port Capability table.
Each entry represents a G.Bond/TDIM port indexed by the
ifIndex. Additional capabilities are available via the
gBondPortCapabilityEntry of the GBOND-MIB.
Note that a G.Bond/TDIM port runs on top of a single
or multiple BCE port(s), which are also indexed by the ifIndex."
INDEX { ifIndex }
::= { g9983PortCapTable 1 }
G9983PortCapEntry ::=
SEQUENCE {
g9983PortCapFecSupported TruthValue,
g9983PortCapFecMaxWordSize Unsigned32,
g9983PortCapFecMaxRedundancySize Unsigned32,
g9983PortCapFecInterleaverTypeSupported INTEGER,
g9983PortCapFecMaxInterleaverDepth Unsigned32
}
G9983PortCapEntry ::=
SEQUENCE {
g9983PortCapFecSupported TruthValue,
g9983PortCapFecMaxWordSize Unsigned32,
g9983PortCapFecMaxRedundancySize Unsigned32,
g9983PortCapFecInterleaverTypeSupported INTEGER,
g9983PortCapFecMaxInterleaverDepth Unsigned32
}
g9983PortCapFecSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "FEC and Interleaver capability of the G.Bond/TDIM port. This object has a value of true(1) when the port supports the FEC and Interleaver function. A value of false(2) is returned when the port does not support the FEC and Interleaver function.
g9983PortCapFecSupported对象类型语法TruthValue MAX-ACCESS只读状态当前描述“G.Bond/TDIM端口的FEC和交织器功能。当端口支持FEC和交织器功能时，此对象的值为true（1）。当端口不支持FEC和交织器功能时，返回值为false（2）。
This object maps to the TR-159/G.998.3 attribute
aFECSupported."
REFERENCE
"[TR-159], Section 5.5.4.4; [G.998.3], Appendix II, B-VI"
::= { g9983PortCapEntry 1 }
This object maps to the TR-159/G.998.3 attribute
aFECSupported."
REFERENCE
"[TR-159], Section 5.5.4.4; [G.998.3], Appendix II, B-VI"
::= { g9983PortCapEntry 1 }
g9983PortCapFecMaxWordSize OBJECT-TYPE SYNTAX Unsigned32 (0|20..255) UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "A maximum supported FEC code word size, in octets, for G.Bond/TDIM ports supporting the FEC function.
g9983PortCapFecMaxWordSize对象类型语法无符号32（0 | 20..255）单位“八位字节”最大访问只读状态当前描述“支持FEC功能的G.Bond/TDIM端口支持的最大FEC码字大小，以八位字节为单位。
A value of zero SHALL be returned if the FEC function is not supported.
如果不支持FEC功能，则应返回零值。
This object maps to the TR-159 attribute aFECWordSize."
REFERENCE
"[TR-159], Section 5.5.4.11; [G.998.3], Appendix II, B-XI"
::= { g9983PortCapEntry 2 }
This object maps to the TR-159 attribute aFECWordSize."
REFERENCE
"[TR-159], Section 5.5.4.11; [G.998.3], Appendix II, B-XI"
::= { g9983PortCapEntry 2 }
g9983PortCapFecMaxRedundancySize OBJECT-TYPE SYNTAX Unsigned32 (0|2|4|8|16|20) UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "A maximum supported FEC redundancy word size, in octets, for G.Bond/TDIM ports supporting the FEC function.
g9983PortCapFecMaxRedundancySize对象类型语法Unsigned32（0 | 2 | 4 | 8 | 16 | 20）单位“八位字节”最大访问只读状态当前描述“支持FEC功能的G.Bond/TDIM端口支持的最大FEC冗余字大小，以八位字节为单位。
A value of zero SHALL be returned if the FEC function is not supported.
如果不支持FEC功能，则应返回零值。
This object maps to the TR-159 attribute aFECMaxRedundancySize."
此对象映射到TR-159属性aFECMaxRedundancySize。”
REFERENCE
"[TR-159], Section 5.5.4.12; [G.998.3], Appendix II, B-XII"
::= { g9983PortCapEntry 3 }
REFERENCE
"[TR-159], Section 5.5.4.12; [G.998.3], Appendix II, B-XII"
::= { g9983PortCapEntry 3 }
g9983PortCapFecInterleaverTypeSupported OBJECT-TYPE
SYNTAX INTEGER {
none(0),
block(1),
convolution(2),
blockConvolution(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Supported Interleaver types for G.Bond/TDIM ports supporting
the FEC function.
g9983PortCapFecInterleaverTypeSupported OBJECT-TYPE
SYNTAX INTEGER {
none(0),
block(1),
convolution(2),
blockConvolution(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Supported Interleaver types for G.Bond/TDIM ports supporting
the FEC function.
Possible values are: none - the port does not support interleaving block - the port supports Block Interleaver convolution - the port supports Convolution Interleaver blockConvolution - the port supports both Block Interleaver and Convolution Interleaver
可能的值为：无-端口不支持交织块-端口支持块交织器卷积-端口支持卷积交织器块卷积-端口同时支持块交织器和卷积交织器
This object maps to the TR-159 attribute
aFECInterleaverTypesSupported."
REFERENCE
"[TR-159], Section 5.5.4.13; [G.998.3], Appendix II, B-XIII"
::= { g9983PortCapEntry 4 }
This object maps to the TR-159 attribute
aFECInterleaverTypesSupported."
REFERENCE
"[TR-159], Section 5.5.4.13; [G.998.3], Appendix II, B-XIII"
::= { g9983PortCapEntry 4 }
g9983PortCapFecMaxInterleaverDepth OBJECT-TYPE SYNTAX Unsigned32 (0|1|2|3|4|6|8|12|16|24|32|48|96) MAX-ACCESS read-only STATUS current DESCRIPTION "A maximum Interleaver depth for G.Bond/TDIM ports supporting the FEC function.
g9983PortCapFecMaxInterleaverDepth对象类型语法Unsigned32（0 | 1 | 2 | 3 | 4 | 6 | 8 | 12 | 16 | 24 | 32 | 48 | 96）最大访问只读状态当前描述“支持FEC功能的G.Bond/TDIM端口的最大交织器深度。
A value of zero SHALL be returned if the Interleaver is not supported.
如果不支持交织器，则应返回零值。
This object maps to the TR-159 attribute
aFECMaxInterleaverDepth."
REFERENCE
"[TR-159], Section 5.5.4.14; [G.998.3], Appendix II, B-XIV"
::= { g9983PortCapEntry 5 }
This object maps to the TR-159 attribute
aFECMaxInterleaverDepth."
REFERENCE
"[TR-159], Section 5.5.4.14; [G.998.3], Appendix II, B-XIV"
::= { g9983PortCapEntry 5 }
g9983PortStatTable OBJECT-TYPE SYNTAX SEQUENCE OF G9983PortStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides overall status information of G.Bond TDIM ports, complementing the generic status information from the ifTable of the IF-MIB and the gBondPortStatFltStatus of the GBOND-MIB. Additional status information about connected BCEs is available from the relevant line MIBs.
G9983PortStatEntry MAX-ACCESS的G9983PortStatAttable对象类型语法序列不可访问状态当前说明“此表提供了G.Bond TDIM端口的总体状态信息，补充了IF-MIB的ifTable和GBOND-MIB的gBondPortStatFltStatus中的通用状态信息。有关已连接BCE的其他状态信息可从相关线路MIB获得。
This table contains live data from the equipment. As such,
it is NOT persistent."
::= { g9983Port 3 }
This table contains live data from the equipment. As such,
it is NOT persistent."
::= { g9983Port 3 }
g9983PortStatEntry OBJECT-TYPE
SYNTAX G9983PortStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port Status table.
Each entry represents a G.Bond/TDIM port indexed by the
ifIndex.
Note that a G.Bond GBS port runs on top of a single
or multiple BCE port(s), which are also indexed by the ifIndex."
INDEX { ifIndex }
::= { g9983PortStatTable 1 }
g9983PortStatEntry OBJECT-TYPE
SYNTAX G9983PortStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port Status table.
Each entry represents a G.Bond/TDIM port indexed by the
ifIndex.
Note that a G.Bond GBS port runs on top of a single
or multiple BCE port(s), which are also indexed by the ifIndex."
INDEX { ifIndex }
::= { g9983PortStatTable 1 }
G9983PortStatEntry ::=
SEQUENCE {
g9983PortStatFecOperState TruthValue,
g9983PortStatFltStatus BITS,
g9983PortStatCrc4Errors Counter32,
g9983PortStatCrc6Errors Counter32,
g9983PortStatCrc8Errors Counter32
}
G9983PortStatEntry ::=
SEQUENCE {
g9983PortStatFecOperState TruthValue,
g9983PortStatFltStatus BITS,
g9983PortStatCrc4Errors Counter32,
g9983PortStatCrc6Errors Counter32,
g9983PortStatCrc8Errors Counter32
}
g9983PortStatFecOperState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only value indicating the current operational state of the OPTIONAL Forward Error Correction (FEC) function for the G.998.3 port. A value of 'false' indicates that the FEC function is disabled. A value of 'true' indicates that the FEC function is enabled (and supported).
g9983PortStatFecOperState对象类型语法TruthValue MAX-ACCESS只读状态当前描述“指示可选前向纠错（FEC）的当前操作状态的只读值”用于G.998.3端口的函数。值“false”表示FEC函数已禁用。“true”表示FEC函数已启用（并受支持）。
This object maps to the TR-159 attribute aFECOperState."
REFERENCE
"[TR-159], Section 5.5.4.6"
::= { g9983PortStatEntry 1 }
This object maps to the TR-159 attribute aFECOperState."
REFERENCE
"[TR-159], Section 5.5.4.6"
::= { g9983PortStatEntry 1 }
g9983PortStatFltStatus OBJECT-TYPE
SYNTAX BITS {
serviceDown(0),
wrongConfig(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G.Bond/TDIM port fault status. This is a bitmap of possible
conditions. The various bit positions are:
serviceDown - at least one of the services defined
for this aggregation group is down
(due to low rate).
wrongConfig - at least one BCE at the remote GBS-R
is already connected to another GBS.
g9983PortStatFltStatus OBJECT-TYPE
SYNTAX BITS {
serviceDown(0),
wrongConfig(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G.Bond/TDIM port fault status. This is a bitmap of possible
conditions. The various bit positions are:
serviceDown - at least one of the services defined
for this aggregation group is down
(due to low rate).
wrongConfig - at least one BCE at the remote GBS-R
is already connected to another GBS.
This object is intended to supplement the ifOperStatus object
in the IF-MIB and the gBondPortStatFltStatus object in the
GBOND-MIB."
REFERENCE
"[G.998.3], Section 6.3; RFC 2863, IF-MIB, ifOperStatus;
RFC 6765, GBOND-MIB, gBondPortStatFltStatus"
::= { g9983PortStatEntry 2 }
This object is intended to supplement the ifOperStatus object
in the IF-MIB and the gBondPortStatFltStatus object in the
GBOND-MIB."
REFERENCE
"[G.998.3], Section 6.3; RFC 2863, IF-MIB, ifOperStatus;
RFC 6765, GBOND-MIB, gBondPortStatFltStatus"
::= { g9983PortStatEntry 2 }
g9983PortStatCrc4Errors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of CRC-4 errors (frame header errors) on all pairs in the G.Bond/TDIM port. Simultaneous errors on M lines SHOULD be counted M times.
g9983PortStatCrc4Errors对象类型语法计数器32 MAX-ACCESS只读状态当前描述“G.Bond/TDIM端口中所有对上的CRC-4错误（帧标头错误）总数。M行上的同时错误应计M次。
Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime as defined in the IF-MIB.
管理系统重新初始化时，以及IF-MIB中定义的IFCounterInteractionyTime值指示的其他时间，可能会出现此计数器值的不连续性。
This object maps to the TR-159/G.998.3 attribute aCRC4Errors."
REFERENCE
"[TR-159], Section 5.5.4.1; [G.998.3], Appendix II, B-VII"
::= { g9983PortStatEntry 3 }
This object maps to the TR-159/G.998.3 attribute aCRC4Errors."
REFERENCE
"[TR-159], Section 5.5.4.1; [G.998.3], Appendix II, B-VII"
::= { g9983PortStatEntry 3 }
g9983PortStatCrc6Errors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of CRC-6 errors (super-frame errors) on all pairs in the G.Bond/TDIM port. Simultaneous errors on M lines SHOULD be counted 1 time.
g9983PortStatCrc6Errors对象类型语法计数器32 MAX-ACCESS只读状态当前描述“G.Bond/TDIM端口中所有对上的CRC-6错误（超级帧错误）总数。M行上的同时错误应计1次。
Discontinuities in the value of this counter can occur at re-initialization of the local management subsystem, and at other times as indicated by the value of ifCounterDiscontinuityTime as defined in the IF-MIB.
在本地管理子系统重新初始化时，以及在IF-MIB中定义的IFCounterInteractionyTime值指示的其他时间，该计数器的值可能出现不连续。
This object maps to the TR-159/G.998.3 attribute aCRC6Errors."
REFERENCE
"[TR-159], Section 5.5.4.2; [G.998.3], Appendix II, B-VIII"
::= { g9983PortStatEntry 4 }
This object maps to the TR-159/G.998.3 attribute aCRC6Errors."
REFERENCE
"[TR-159], Section 5.5.4.2; [G.998.3], Appendix II, B-VIII"
::= { g9983PortStatEntry 4 }
g9983PortStatCrc8Errors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of CRC-8 errors (event/message errors) on all pairs in the G.Bond/TDIM port. Simultaneous errors on M lines SHOULD be counted M times.
g9983PortStatCrc8Errors对象类型语法计数器32 MAX-ACCESS只读状态当前描述“G.Bond/TDIM端口中所有对上的CRC-8错误（事件/消息错误）总数。M行上的同时错误应计为M次。
Discontinuities in the value of this counter can occur at re-initialization of the local management subsystem, and at other times as indicated by the value of ifCounterDiscontinuityTime as defined in the IF-MIB.
在本地管理子系统重新初始化时，以及在IF-MIB中定义的IFCounterInteractionyTime值指示的其他时间，该计数器的值可能出现不连续。
This object maps to the TR-159/G.998.3 attribute aCRC8Errors."
REFERENCE
"[TR-159], Section 5.5.4.3; [G.998.3], Appendix II, B-IX"
::= { g9983PortStatEntry 5 }
This object maps to the TR-159/G.998.3 attribute aCRC8Errors."
REFERENCE
"[TR-159], Section 5.5.4.3; [G.998.3], Appendix II, B-IX"
::= { g9983PortStatEntry 5 }
g9983OperSvcTable OBJECT-TYPE SYNTAX SEQUENCE OF G9983OperSvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of the operational services configured on a G.Bond/TDIM port. This table reflects current actual service configuration, set by the g9983PortConfAdminServices object. The number of entries (services) in this table therefore can vary between
G9983OperscTable G9983OperscEntry MAX-ACCESS不可访问状态的对象类型语法序列当前描述“G.Bond/TDIM端口上配置的操作服务的表。此表反映g9983PortConfAdminServices对象设置的当前实际服务配置。条目的数量（服务）因此，此表中的数据可能因
0, when no services are configured, and 60, for the maximum
number of services.
This table contains live data from the equipment. As such,
it is NOT persistent."
::= { g9983Port 4 }
0, when no services are configured, and 60, for the maximum
number of services.
This table contains live data from the equipment. As such,
it is NOT persistent."
::= { g9983Port 4 }
g9983OperSvcEntry OBJECT-TYPE
SYNTAX G9983OperSvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port Operational Service table,
containing the index of an active service entry in the
g9983SvcTable. The entry is indexed by the ifIndex,
indicating a corresponding G.Bond/TDIM port, and by
g9983OperSvcPosition (1..60), indicating the
corresponding service position in the G.Bond/TDIM frame."
INDEX { ifIndex, g9983OperSvcPosition }
::= { g9983OperSvcTable 1 }
g9983OperSvcEntry OBJECT-TYPE
SYNTAX G9983OperSvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port Operational Service table,
containing the index of an active service entry in the
g9983SvcTable. The entry is indexed by the ifIndex,
indicating a corresponding G.Bond/TDIM port, and by
g9983OperSvcPosition (1..60), indicating the
corresponding service position in the G.Bond/TDIM frame."
INDEX { ifIndex, g9983OperSvcPosition }
::= { g9983OperSvcTable 1 }
G9983OperSvcEntry ::=
SEQUENCE {
g9983OperSvcPosition G9983SvcOrderIndex,
g9983OperSvcIdx G9983SvcIndex,
g9983OperSvcState INTEGER
}
G9983OperSvcEntry ::=
SEQUENCE {
g9983OperSvcPosition G9983SvcOrderIndex,
g9983OperSvcIdx G9983SvcIndex,
g9983OperSvcState INTEGER
}
g9983OperSvcPosition OBJECT-TYPE SYNTAX G9983SvcOrderIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "G.Bond/TDIM operational service position -- a unique index, indicating relative placement of the associated service pointed to by g9983OperSvcIdx, within the G.Bond/TDIM frame.
g9983OperSvcPosition对象类型语法G9983SvcOrderIndex MAX-ACCESS不可访问状态当前描述“G.Bond/TDIM操作服务位置--唯一索引，指示g9983OperSvcIdx指向的关联服务在G.Bond/TDIM框架内的相对位置。
There can be up to 60 services defined over a TDIM bonded facility. Services with lower indices have higher priority in cases of bandwidth degradation.
TDIM保税设施最多可定义60项服务。在带宽降低的情况下，具有较低索引的服务具有较高的优先级。
The value of g9983OperSvcPosition for the first g9983OperSvcEntry is always 1, incrementing sequentially for each consecutive entry, i.e., 2 for the second entry, 3 for the third, etc.
第一个g9983OperSvcPosition的g9983OperSvcPosition值始终为1，每个连续条目的值依次递增，即第二个条目为2，第三个条目为3，以此类推。
This objects maps to the TR-159/G.998.3 attribute aServiceID."
此对象映射到TR-159/G.998.3属性aServiceID。”
REFERENCE
"[TR-159], Section 5.5.5.1; [G.998.3], Appendix II, C-I"
::= { g9983OperSvcEntry 1 }
REFERENCE
"[TR-159], Section 5.5.5.1; [G.998.3], Appendix II, C-I"
::= { g9983OperSvcEntry 1 }
g9983OperSvcIdx OBJECT-TYPE
SYNTAX G9983SvcIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G.Bond/TDIM operational service index -- a read-only pointer
to an existing entry in the g9983SvcTable (value of
g9983SvcIdx) describing a particular service."
::= { g9983OperSvcEntry 2 }
g9983OperSvcIdx OBJECT-TYPE
SYNTAX G9983SvcIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G.Bond/TDIM operational service index -- a read-only pointer
to an existing entry in the g9983SvcTable (value of
g9983SvcIdx) describing a particular service."
::= { g9983OperSvcEntry 2 }
g9983OperSvcState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G.Bond/TDIM service operational state.
g9983OperSvcState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G.Bond/TDIM service operational state.
Possible values are:
up - Service is up and passing traffic.
down - Service is down, due to a variety of
reasons, e.g., G.Bond/TDIM port is
down, current link bandwidth is too
low to support a particular service,
etc.
This objects maps to the TR-159 attribute aServiceOperState."
REFERENCE
"[TR-159], Section 5.5.5.5"
::= { g9983OperSvcEntry 3 }
Possible values are:
up - Service is up and passing traffic.
down - Service is down, due to a variety of
reasons, e.g., G.Bond/TDIM port is
down, current link bandwidth is too
low to support a particular service,
etc.
This objects maps to the TR-159 attribute aServiceOperState."
REFERENCE
"[TR-159], Section 5.5.5.5"
::= { g9983OperSvcEntry 3 }
g9983SvcTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983SvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of possible services for G.Bond/TDIM ports.
Entries in this table MUST be maintained in a persistent
manner."
::= { g9983Port 5 }
g9983SvcTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983SvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of possible services for G.Bond/TDIM ports.
Entries in this table MUST be maintained in a persistent
manner."
::= { g9983Port 5 }
g9983SvcEntry OBJECT-TYPE
SYNTAX G9983SvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port Service table, containing
the management information applicable to a particular service,
indexed by the g9983SvcIdx, on a G.Bond/TDIM port,
indexed by the ifIndex."
INDEX { ifIndex, g9983SvcIdx }
::= { g9983SvcTable 1 }
g9983SvcEntry OBJECT-TYPE
SYNTAX G9983SvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port Service table, containing
the management information applicable to a particular service,
indexed by the g9983SvcIdx, on a G.Bond/TDIM port,
indexed by the ifIndex."
INDEX { ifIndex, g9983SvcIdx }
::= { g9983SvcTable 1 }
G9983SvcEntry ::=
SEQUENCE {
g9983SvcIdx G9983SvcIndex,
g9983SvcIfIdx InterfaceIndex,
g9983SvcType INTEGER,
g9983SvcSize Unsigned32,
g9983SvcRowStatus RowStatus
}
G9983SvcEntry ::=
SEQUENCE {
g9983SvcIdx G9983SvcIndex,
g9983SvcIfIdx InterfaceIndex,
g9983SvcType INTEGER,
g9983SvcSize Unsigned32,
g9983SvcRowStatus RowStatus
}
g9983SvcIdx OBJECT-TYPE
SYNTAX G9983SvcIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"G.Bond/TDIM service index -- a unique index associated with
a particular service entry."
::= { g9983SvcEntry 1 }
g9983SvcIdx OBJECT-TYPE
SYNTAX G9983SvcIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"G.Bond/TDIM service index -- a unique index associated with
a particular service entry."
::= { g9983SvcEntry 1 }
g9983SvcIfIdx OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "This is a unique index within the ifTable. It represents the interface index of a service to be transmitted over the G.Bond/TDIM service instance.
g9983SvcIfIdx对象类型语法接口index MAX-ACCESS read create STATUS current DESCRIPTION“这是ifTable中的唯一索引。它表示通过G.Bond/TDIM服务实例传输的服务的接口索引。
This objects maps to the TR-159 attribute aServiceIfIndex."
REFERENCE
"[TR-159], Section 5.5.5.2"
::= { g9983SvcEntry 2 }
This objects maps to the TR-159 attribute aServiceIfIndex."
REFERENCE
"[TR-159], Section 5.5.5.2"
::= { g9983SvcEntry 2 }
g9983SvcType OBJECT-TYPE SYNTAX INTEGER { ds1(0), e1(1),
g9983SvcType对象类型语法整数{ds1（0），e1（1），
nxds0(2), nxe0(3), ds3(4), e3(5), clock(6), ethernet(7), atm(8), gfpNoFCS(9), gfp(10) } MAX-ACCESS read-create STATUS current DESCRIPTION "G.Bond/TDIM service type.
nxds0（2）、nxe0（3）、ds3（4）、e3（5）、时钟（6）、以太网（7）、atm（8）、gfpNoFCS（9）、gfp（10）}MAX-ACCESS读取创建状态当前描述“G.Bond/TDIM服务类型”。
Possible values are: ds1 - Clear Channel DS1 (synchronous) e1 - Clear Channel E1 (synchronous) nxds0 - Fractional DS1 (synchronous) nxe0 - Fractional E1 (synchronous) ds3 - DS3 (synchronous) e3 - E3 (synchronous) clock - Clock transfer (synchronous) ethernet - Ethernet (asynchronous) atm - ATM (asynchronous) gfpNoFCS - GFP encapsulated without FCS (asynchronous) gfp - GFP encapsulated with FCS (asynchronous)
可能的值为：ds1-清除通道ds1（同步）e1-清除通道e1（同步）nxds0-分数ds1（同步）nxe0-分数e1（同步）ds3-ds3（同步）e3-e3（同步）时钟-时钟传输（同步）以太网-以太网（异步）atm-atm（异步）gfpNoFCS-不带FCS封装的GFP（异步）GFP-带FCS封装的GFP（异步）
For the GBS-R ports, the value of this object cannot be changed directly. This value may be changed as a result of a write operation on the g9983SvcType object of a remote GBS-C.
对于GBS-R端口，无法直接更改此对象的值。远程GBS-C的g9983SvcType对象上的写入操作可能会更改此值。
Attempts to change this object MUST be rejected for the GBS-R ports.
必须为GBS-R端口拒绝更改此对象的尝试。
This object maps to the TR-159/G.998.3 attribute aServiceType."
REFERENCE
"[TR-159], Section 5.5.5.3; [G.998.3], Appendix II, C-II"
::= { g9983SvcEntry 3 }
This object maps to the TR-159/G.998.3 attribute aServiceType."
REFERENCE
"[TR-159], Section 5.5.5.3; [G.998.3], Appendix II, C-II"
::= { g9983SvcEntry 3 }
g9983SvcSize OBJECT-TYPE SYNTAX Unsigned32 (0|20..255) UNITS "octets" MAX-ACCESS read-create STATUS current DESCRIPTION "Service size, in octets, per bonding sub-block for a specific service identified by g9983SvcIdx.
G9983SVCIZE对象类型语法Unsigned32（0 | 20..255）单位“八位字节”最大访问读取创建状态当前描述“服务大小，以八位字节为单位，由g9983SvcIdx标识的特定服务的每个绑定子块。
For TDM (synchronous) services with variable size (e.g., fractional DS1/E1), this object represents the number of DS0/E0 channels. For asynchronous services (Ethernet, ATM, GFPnoFCS, or GFP), this object represents the maximum number of octets. For non-fractional TDM services (i.e., DS1, E1, DS3, E3, and clock), the value of this object MUST be 0.
对于具有可变大小的TDM（同步）服务（例如，分数DS1/E1），此对象表示DS0/E0通道的数量。对于异步服务（以太网、ATM、GFPnoFCS或GFP），此对象表示最大八位字节数。对于非分数TDM服务（即DS1、E1、DS3、E3和时钟），此对象的值必须为0。
A GET operation returns the current value. A SET operation, allowed on GBS-C ports, changes the service size to the indicated value. If the service type is a fixed-rate synchronous service (g9983SvcType is nxds0, nxe0, ds1, e1, ds3, e3, or clock), the operation MUST be rejected.
GET操作返回当前值。GBS-C端口上允许的SET操作将服务大小更改为指示值。如果服务类型为固定速率同步服务（g9983SvcType为nxds0、nxe0、ds1、e1、ds3、e3或时钟），则必须拒绝该操作。
This object maps to the TR-159/G.998.3 attribute aServiceSize."
REFERENCE
"[TR-159], Section 5.5.5.4; [G.998.3], Appendix II, C-III"
::= { g9983SvcEntry 4 }
This object maps to the TR-159/G.998.3 attribute aServiceSize."
REFERENCE
"[TR-159], Section 5.5.5.4; [G.998.3], Appendix II, C-III"
::= { g9983SvcEntry 4 }
g9983SvcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object controls the creation, modification, or deletion of the associated entry in the g9983SvcTable per the semantics of RowStatus.
g9983SvcRowStatus对象类型语法RowStatus MAX-ACCESS read create STATUS current DESCRIPTION“此对象根据RowStatus的语义控制g9983SvcTable中关联项的创建、修改或删除。
If an 'active' entry is referenced via g9983OperSvcIdx or a g9983PortConfAdminServices instance, or indexes a g9983SvcPm*Entry, the entry MUST remain 'active'.
如果通过g9983OperSvcIdx或g9983PortConfAdminServices实例引用了“活动”条目，或索引了g9983SvcPm*条目，则该条目必须保持“活动”。
An 'active' entry SHALL NOT be modified. In order to modify an
existing entry, it MUST be taken out of service (by setting
this object to 'notInService'), modified, and set to 'active'
again."
::= { g9983SvcEntry 5 }
An 'active' entry SHALL NOT be modified. In order to modify an
existing entry, it MUST be taken out of service (by setting
this object to 'notInService'), modified, and set to 'active'
again."
::= { g9983SvcEntry 5 }
-------------------------------
-- Performance Monitoring group
-------------------------------
-------------------------------
-- Performance Monitoring group
-------------------------------
g9983PM OBJECT IDENTIFIER ::= { g9983Port 6 }
g9983PM OBJECT IDENTIFIER ::= { g9983Port 6 }
g9983PortPmCurTable OBJECT-TYPE SYNTAX SEQUENCE OF G9983PortPmCurEntry MAX-ACCESS not-accessible
G9983PortPmCurEntry MAX-ACCESS的g9983PortPmCurTable对象类型语法序列不可访问
STATUS current
DESCRIPTION
"This table contains current Performance Monitoring information
for a G.Bond/TDIM port. This table contains live data from the
equipment and as such is NOT persistent."
::= { g9983PM 1 }
STATUS current
DESCRIPTION
"This table contains current Performance Monitoring information
for a G.Bond/TDIM port. This table contains live data from the
equipment and as such is NOT persistent."
::= { g9983PM 1 }
g9983PortPmCurEntry OBJECT-TYPE
SYNTAX G9983PortPmCurEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port PM table.
Each entry represents a G.Bond/TDIM port indexed by the
ifIndex."
INDEX { ifIndex }
::= { g9983PortPmCurTable 1 }
g9983PortPmCurEntry OBJECT-TYPE
SYNTAX G9983PortPmCurEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port PM table.
Each entry represents a G.Bond/TDIM port indexed by the
ifIndex."
INDEX { ifIndex }
::= { g9983PortPmCurTable 1 }
G9983PortPmCurEntry ::=
SEQUENCE {
g9983PortPmCur15MinValidIntervals HCPerfValidIntervals,
g9983PortPmCur15MinInvalidIntervals HCPerfInvalidIntervals,
g9983PortPmCur15MinTimeElapsed HCPerfTimeElapsed,
g9983PortPmCur15MinCrc4s HCPerfCurrentCount,
g9983PortPmCur15MinCrc6s HCPerfCurrentCount,
g9983PortPmCur15MinCrc8s HCPerfCurrentCount,
g9983PortPmCur1DayValidIntervals Unsigned32,
g9983PortPmCur1DayInvalidIntervals Unsigned32,
g9983PortPmCur1DayTimeElapsed HCPerfTimeElapsed,
g9983PortPmCur1DayCrc4s HCPerfCurrentCount,
g9983PortPmCur1DayCrc6s HCPerfCurrentCount,
g9983PortPmCur1DayCrc8s HCPerfCurrentCount
}
G9983PortPmCurEntry ::=
SEQUENCE {
g9983PortPmCur15MinValidIntervals HCPerfValidIntervals,
g9983PortPmCur15MinInvalidIntervals HCPerfInvalidIntervals,
g9983PortPmCur15MinTimeElapsed HCPerfTimeElapsed,
g9983PortPmCur15MinCrc4s HCPerfCurrentCount,
g9983PortPmCur15MinCrc6s HCPerfCurrentCount,
g9983PortPmCur15MinCrc8s HCPerfCurrentCount,
g9983PortPmCur1DayValidIntervals Unsigned32,
g9983PortPmCur1DayInvalidIntervals Unsigned32,
g9983PortPmCur1DayTimeElapsed HCPerfTimeElapsed,
g9983PortPmCur1DayCrc4s HCPerfCurrentCount,
g9983PortPmCur1DayCrc6s HCPerfCurrentCount,
g9983PortPmCur1DayCrc8s HCPerfCurrentCount
}
g9983PortPmCur15MinValidIntervals OBJECT-TYPE SYNTAX HCPerfValidIntervals MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only number of 15-minute intervals for which the performance data was collected. The value of this object will be 96 or the maximum number of 15-minute history intervals collected by the implementation, unless the measurement was (re)started recently, in which case the value will be the number of complete 15-minute intervals for which there are at least some data.
g9983PortPmCur15MinValidIntervals对象类型语法HCPerfValidIntervals MAX-ACCESS只读状态当前说明“收集性能数据的15分钟间隔的只读数。除非最近（重新）开始测量，否则该对象的值将为96或实施收集的最大15分钟历史间隔数，在这种情况下，该值将是至少有一些数据的完整15分钟间隔数。
In certain cases, it is possible that some intervals are unavailable. In this case, this object reports the maximum interval number for which data is available.
在某些情况下，某些间隔可能不可用。在这种情况下，此对象报告数据可用的最大间隔数。
This object partially maps to the TR-159 attribute
aGroupPerf15MinValidIntervals."
REFERENCE
"[TR-159], Section 5.5.1.32"
::= { g9983PortPmCurEntry 1 }
This object partially maps to the TR-159 attribute
aGroupPerf15MinValidIntervals."
REFERENCE
"[TR-159], Section 5.5.1.32"
::= { g9983PortPmCurEntry 1 }
g9983PortPmCur15MinInvalidIntervals OBJECT-TYPE SYNTAX HCPerfInvalidIntervals MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only number of 15-minute intervals for which the performance data was not always available. The value will typically be zero, except in cases where the data for some intervals are not available.
g9983PortPmCur15MinInvalidIntervals对象类型语法HCPerfInvalidIntervals MAX-ACCESS只读状态当前描述“性能数据并非始终可用的15分钟间隔的只读数。除非某些间隔的数据不可用，否则该值通常为零。
This object partially maps to the TR-159 attribute
aGroupPerf15MinInvalidIntervals."
REFERENCE
"[TR-159], Section 5.5.1.33"
::= { g9983PortPmCurEntry 2 }
This object partially maps to the TR-159 attribute
aGroupPerf15MinInvalidIntervals."
REFERENCE
"[TR-159], Section 5.5.1.33"
::= { g9983PortPmCurEntry 2 }
g9983PortPmCur15MinTimeElapsed OBJECT-TYPE SYNTAX HCPerfTimeElapsed UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only count of seconds that have elapsed since the beginning of the current 15-minute performance interval.
G9983PortPmcur15MinimeeLassed对象类型语法HCPerfTimeAppeased UNITS“seconds”MAX-ACCESS只读状态current DESCRIPTION“自当前15分钟性能间隔开始以来已过的只读秒数。
This object partially maps to the TR-159 attribute
aGroupPerfCurr15MinTimeElapsed."
REFERENCE
"[TR-159], Section 5.5.1.34"
::= { g9983PortPmCurEntry 3 }
This object partially maps to the TR-159 attribute
aGroupPerfCurr15MinTimeElapsed."
REFERENCE
"[TR-159], Section 5.5.1.34"
::= { g9983PortPmCurEntry 3 }
g9983PortPmCur15MinCrc4s OBJECT-TYPE SYNTAX HCPerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only count of CRC-4 errors (frame header errors) on all active pairs in the G.Bond/TDIM port during the current
g9983PortPmCur15MinCrc4s对象类型语法HCPerfCurrentCount MAX-ACCESS只读状态current DESCRIPTION“当前操作期间G.Bond/TDIM端口中所有活动对上CRC-4错误（帧头错误）的只读计数
15-minute performance interval. Simultaneous errors on M lines SHOULD be counted M times.
表演间隔15分钟。M行上的同时错误应计M次。
Note that the total number of CRC-4 errors is indicated by the g9983PortStatCrc4Errors object.
请注意，CRC-4错误的总数由g9983PortStatCrc4Errors对象表示。
This object is inhibited during Severely Errored Seconds (SES)
or Unavailable Seconds (UAS)."
REFERENCE
"[TR-159], Section 5.5.4.1"
::= { g9983PortPmCurEntry 4}
This object is inhibited during Severely Errored Seconds (SES)
or Unavailable Seconds (UAS)."
REFERENCE
"[TR-159], Section 5.5.4.1"
::= { g9983PortPmCurEntry 4}
g9983PortPmCur15MinCrc6s OBJECT-TYPE SYNTAX HCPerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only count of CRC-6 errors (super-frame errors) on all active pairs in the G.Bond/TDIM port during the current 15-minute performance interval. Simultaneous errors on M lines SHOULD be counted 1 time.
g9983PortPmCur15MinCrc6s对象类型语法HCPerfCurrentCount MAX-ACCESS只读状态current DESCRIPTION“在当前15分钟的性能间隔期间，G.Bond/TDIM端口中所有活动对上CRC-6错误（超级帧错误）的只读计数。M行上的同时错误应计1次。
Note that the total number of CRC-6 errors is indicated by the g9983PortStatCrc6Errors object.
请注意，CRC-6错误的总数由g9983PortStatCrc6Errors对象表示。
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159], Section 5.5.4.2"
::= { g9983PortPmCurEntry 5}
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159], Section 5.5.4.2"
::= { g9983PortPmCurEntry 5}
g9983PortPmCur15MinCrc8s OBJECT-TYPE SYNTAX HCPerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only count of CRC-8 errors (event/message errors) on all active pairs in the G.Bond/TDIM port during the current 15-minute performance interval. Simultaneous errors on M lines SHOULD be counted M times.
g9983PortPmCur15MinCrc8s对象类型语法HCPerfCurrentCount MAX-ACCESS只读状态current DESCRIPTION“在当前15分钟的性能间隔期间，G.Bond/TDIM端口中所有活动对上的CRC-8错误（事件/消息错误）的只读计数。M行上的同时错误应计数M次。
Note that the total number of CRC-8 errors is indicated by the g9983PortStatCrc8Errors object.
请注意，CRC-8错误的总数由g9983PortStatCrc8Errors对象表示。
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159], Section 5.5.4.3"
::= { g9983PortPmCurEntry 6}
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159], Section 5.5.4.3"
::= { g9983PortPmCurEntry 6}
g9983PortPmCur1DayValidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 1-day intervals for which data was
collected. The value of this object will be 7 or the maximum
number of 1-day history intervals collected by the
implementation, unless the measurement was (re)started recently,
in which case the value will be the number of complete 1-day
intervals for which there are at least some data.
In certain cases, it is possible that some intervals are
unavailable. In this case, this object reports the maximum
interval number for which data is available."
REFERENCE
"[TR-159], Section 5.5.1.45"
::= { g9983PortPmCurEntry 7 }
g9983PortPmCur1DayValidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 1-day intervals for which data was
collected. The value of this object will be 7 or the maximum
number of 1-day history intervals collected by the
implementation, unless the measurement was (re)started recently,
in which case the value will be the number of complete 1-day
intervals for which there are at least some data.
In certain cases, it is possible that some intervals are
unavailable. In this case, this object reports the maximum
interval number for which data is available."
REFERENCE
"[TR-159], Section 5.5.1.45"
::= { g9983PortPmCurEntry 7 }
g9983PortPmCur1DayInvalidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 1-day intervals for which data was
not always available. The value will typically be zero, except
in cases where the data for some intervals are not available."
REFERENCE
"[TR-159], Section 5.5.1.46"
::= { g9983PortPmCurEntry 8 }
g9983PortPmCur1DayInvalidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 1-day intervals for which data was
not always available. The value will typically be zero, except
in cases where the data for some intervals are not available."
REFERENCE
"[TR-159], Section 5.5.1.46"
::= { g9983PortPmCurEntry 8 }
g9983PortPmCur1DayTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds that have elapsed since the
beginning of the current 1-day performance interval."
REFERENCE
"[TR-159], Section 5.5.1.47"
::= { g9983PortPmCurEntry 9 }
g9983PortPmCur1DayTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds that have elapsed since the
beginning of the current 1-day performance interval."
REFERENCE
"[TR-159], Section 5.5.1.47"
::= { g9983PortPmCurEntry 9 }
g9983PortPmCur1DayCrc4s OBJECT-TYPE SYNTAX HCPerfCurrentCount MAX-ACCESS read-only STATUS current
g9983PortPmCur1DayCrc4s对象类型语法HCPerfCurrentCount最大访问只读状态当前
DESCRIPTION "A read-only count of CRC-4 errors on the G.Bond/TDIM port in the current 1-day performance interval.
描述“当前1天性能间隔内G.Bond/TDIM端口上CRC-4错误的只读计数。
This object is inhibited during Severely Errored Seconds (SES)
and Unavailable Seconds (UAS)."
::= { g9983PortPmCurEntry 10 }
This object is inhibited during Severely Errored Seconds (SES)
and Unavailable Seconds (UAS)."
::= { g9983PortPmCurEntry 10 }
g9983PortPmCur1DayCrc6s OBJECT-TYPE SYNTAX HCPerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only count of CRC-6 errors on the G.Bond/TDIM port in the current 1-day performance interval.
g9983PortPmCur1DayCrc6s对象类型语法HCPerfCurrentCount MAX-ACCESS只读状态当前描述“当前1天性能间隔内G.Bond/TDIM端口上CRC-6错误的只读计数。
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983PortPmCurEntry 11 }
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983PortPmCurEntry 11 }
g9983PortPmCur1DayCrc8s OBJECT-TYPE SYNTAX HCPerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only count of CRC-8 errors on the G.Bond/TDIM port in the current 1-day performance interval.
g9983PortPmCur1DayCrc8s对象类型语法HCPerfCurrentCount MAX-ACCESS只读状态当前说明“当前1天性能间隔内G.Bond/TDIM端口上CRC-8错误的只读计数。
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983PortPmCurEntry 12 }
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983PortPmCurEntry 12 }
-- Port PM history: 15-min buckets
--港口PM历史记录：15分钟
g9983PortPm15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983PortPm15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains historical 15-minute buckets of Performance
Monitoring information for a G.Bond/TDIM port (a row for each
15-minute interval, up to 96 intervals).
Entries in this table MUST be maintained in a persistent manner."
::= { g9983PM 2 }
g9983PortPm15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983PortPm15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains historical 15-minute buckets of Performance
Monitoring information for a G.Bond/TDIM port (a row for each
15-minute interval, up to 96 intervals).
Entries in this table MUST be maintained in a persistent manner."
::= { g9983PM 2 }
g9983PortPm15MinEntry OBJECT-TYPE SYNTAX G9983PortPm15MinEntry MAX-ACCESS not-accessible STATUS current
G9983PortPM15大陆对象类型语法G9983PortPM15大陆最大访问不可访问状态当前
DESCRIPTION
"An entry in the G.Bond/TDIM Port historical 15-minute PM table.
Each entry represents Performance Monitoring data for a G.Bond
TDIM port, indexed by the ifIndex, collected during a particular
15-minute interval, indexed by the
g9983PortPm15MinIntervalIndex."
INDEX { ifIndex, g9983PortPm15MinIntervalIndex }
::= { g9983PortPm15MinTable 1 }
DESCRIPTION
"An entry in the G.Bond/TDIM Port historical 15-minute PM table.
Each entry represents Performance Monitoring data for a G.Bond
TDIM port, indexed by the ifIndex, collected during a particular
15-minute interval, indexed by the
g9983PortPm15MinIntervalIndex."
INDEX { ifIndex, g9983PortPm15MinIntervalIndex }
::= { g9983PortPm15MinTable 1 }
G9983PortPm15MinEntry ::=
SEQUENCE {
g9983PortPm15MinIntervalIndex Unsigned32,
g9983PortPm15MinIntervalMoniTime HCPerfTimeElapsed,
g9983PortPm15MinIntervalCrc4s HCPerfIntervalCount,
g9983PortPm15MinIntervalCrc6s HCPerfIntervalCount,
g9983PortPm15MinIntervalCrc8s HCPerfIntervalCount,
g9983PortPm15MinIntervalValid TruthValue
}
G9983PortPm15MinEntry ::=
SEQUENCE {
g9983PortPm15MinIntervalIndex Unsigned32,
g9983PortPm15MinIntervalMoniTime HCPerfTimeElapsed,
g9983PortPm15MinIntervalCrc4s HCPerfIntervalCount,
g9983PortPm15MinIntervalCrc6s HCPerfIntervalCount,
g9983PortPm15MinIntervalCrc8s HCPerfIntervalCount,
g9983PortPm15MinIntervalValid TruthValue
}
g9983PortPm15MinIntervalIndex OBJECT-TYPE SYNTAX Unsigned32 (1..96) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance data interval number. 1 is the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are OPTIONAL.
G9983PortPM15MiniIntervalIndex对象类型语法Unsigned32（1..96）MAX-ACCESS不可访问状态当前描述“性能数据间隔号。1是最近的上一个间隔；间隔96是24小时前。间隔2..96是可选的。
This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalNumber."
REFERENCE
"[TR-159], Section 5.5.1.57"
::= { g9983PortPm15MinEntry 1 }
This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalNumber."
REFERENCE
"[TR-159], Section 5.5.1.57"
::= { g9983PortPm15MinEntry 1 }
g9983PortPm15MinIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds over which the performance data
was actually monitored. This value will be the same as the
interval duration (900 seconds), except in a situation where
performance data could not be collected for any reason."
::= { g9983PortPm15MinEntry 2 }
g9983PortPm15MinIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds over which the performance data
was actually monitored. This value will be the same as the
interval duration (900 seconds), except in a situation where
performance data could not be collected for any reason."
::= { g9983PortPm15MinEntry 2 }
g9983PortPm15MinIntervalCrc4s OBJECT-TYPE SYNTAX HCPerfIntervalCount
G9983PortPM15MiniIntervalCRC4S对象类型语法HCPerfIntervalCount
MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only count of CRC-4 errors on the G.Bond/TDIM port during the 15-minute performance history interval.
MAX-ACCESS只读状态当前描述“在15分钟的性能历史间隔期间，G.Bond/TDIM端口上CRC-4错误的只读计数。
This object is inhibited during Severely Errored Seconds (SES)
and Unavailable Seconds (UAS)."
::= { g9983PortPm15MinEntry 3 }
This object is inhibited during Severely Errored Seconds (SES)
and Unavailable Seconds (UAS)."
::= { g9983PortPm15MinEntry 3 }
g9983PortPm15MinIntervalCrc6s OBJECT-TYPE SYNTAX HCPerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only count of CRC-6 errors on the G.Bond/TDIM port during the 15-minute performance history interval.
G9983PortPM15MiniIntervalCRC6S对象类型语法HCPerfIntervalCount MAX-ACCESS只读状态当前描述“在15分钟的性能历史记录间隔内，G.Bond/TDIM端口上CRC-6错误的只读计数。
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983PortPm15MinEntry 4 }
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983PortPm15MinEntry 4 }
g9983PortPm15MinIntervalCrc8s OBJECT-TYPE SYNTAX HCPerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only count of CRC-8 errors on the G.Bond/TDIM port during the current 15-minute performance interval.
G9983PortPM15MiniIntervalCRC8S对象类型语法HCPerfIntervalCount MAX-ACCESS只读状态当前描述“当前15分钟性能间隔期间G.Bond/TDIM端口上CRC-8错误的只读计数。
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983PortPm15MinEntry 5 }
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983PortPm15MinEntry 5 }
g9983PortPm15MinIntervalValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only object indicating whether or not this history bucket contains valid data. A valid bucket is reported as true(1) and an invalid bucket as false(2). If this history bucket is invalid, the BTU-C MUST NOT produce notifications based upon the value of the counters in this bucket. Note that an implementation may decide not to store invalid history buckets in its database. In such a case, this object is not required, as only valid history buckets are available while invalid history buckets are simply not in the database.
g9983PortPm15MinIntervalValid对象类型语法TruthValue MAX-ACCESS只读状态当前描述“一个只读对象，指示此历史存储桶是否包含有效数据。有效存储桶报告为true（1），无效存储桶报告为false（2）。如果此历史存储桶无效，BTU-C不得基于此存储桶中计数器的值生成通知。请注意，实现可能决定不在其数据库中存储无效的历史存储桶。在这种情况下，不需要此对象，因为只有有效的历史存储桶可用，而无效的历史存储桶不可用mply不在数据库中。
This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalValid."
REFERENCE
"[TR-159], Section 5.5.1.58"
::= { g9983PortPm15MinEntry 6 }
This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalValid."
REFERENCE
"[TR-159], Section 5.5.1.58"
::= { g9983PortPm15MinEntry 6 }
-- Port PM history: 1-day buckets
--港口PM历史记录：1天铲斗
g9983PortPm1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983PortPm1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains historical 1-day buckets of Performance
Monitoring information for a G.Bond/TDIM port (a row for each
1-day interval, up to 7 intervals).
Entries in this table MUST be maintained in a persistent manner."
::= { g9983PM 3 }
g9983PortPm1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983PortPm1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains historical 1-day buckets of Performance
Monitoring information for a G.Bond/TDIM port (a row for each
1-day interval, up to 7 intervals).
Entries in this table MUST be maintained in a persistent manner."
::= { g9983PM 3 }
g9983PortPm1DayEntry OBJECT-TYPE
SYNTAX G9983PortPm1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port historical 1-day PM table.
Each entry represents Performance Monitoring data for such a
port, indexed by the ifIndex, collected during a particular
1-day interval, indexed by the g9983PortPm1DayIntervalIndex."
INDEX { ifIndex, g9983PortPm1DayIntervalIndex }
::= { g9983PortPm1DayTable 1 }
g9983PortPm1DayEntry OBJECT-TYPE
SYNTAX G9983PortPm1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port historical 1-day PM table.
Each entry represents Performance Monitoring data for such a
port, indexed by the ifIndex, collected during a particular
1-day interval, indexed by the g9983PortPm1DayIntervalIndex."
INDEX { ifIndex, g9983PortPm1DayIntervalIndex }
::= { g9983PortPm1DayTable 1 }
G9983PortPm1DayEntry ::=
SEQUENCE {
g9983PortPm1DayIntervalIndex Unsigned32,
g9983PortPm1DayIntervalMoniTime HCPerfTimeElapsed,
g9983PortPm1DayIntervalCrc4s HCPerfIntervalCount,
g9983PortPm1DayIntervalCrc6s HCPerfIntervalCount,
g9983PortPm1DayIntervalCrc8s HCPerfIntervalCount,
g9983PortPm1DayIntervalValid TruthValue
}
G9983PortPm1DayEntry ::=
SEQUENCE {
g9983PortPm1DayIntervalIndex Unsigned32,
g9983PortPm1DayIntervalMoniTime HCPerfTimeElapsed,
g9983PortPm1DayIntervalCrc4s HCPerfIntervalCount,
g9983PortPm1DayIntervalCrc6s HCPerfIntervalCount,
g9983PortPm1DayIntervalCrc8s HCPerfIntervalCount,
g9983PortPm1DayIntervalValid TruthValue
}
g9983PortPm1DayIntervalIndex OBJECT-TYPE SYNTAX Unsigned32 (1..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance data interval number. 1 is the most recent previous interval; interval 7 is 7 days ago.
g9983PortPm1DayIntervalIndex对象类型语法Unsigned32（1..7）MAX-ACCESS不可访问状态当前描述“性能数据间隔号。1是最近的上一个间隔；间隔7是7天前。
Intervals 2..7 are OPTIONAL.
间隔2..7是可选的。
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalNumber."
REFERENCE
"[TR-159], Section 5.5.1.62"
::= { g9983PortPm1DayEntry 1 }
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalNumber."
REFERENCE
"[TR-159], Section 5.5.1.62"
::= { g9983PortPm1DayEntry 1 }
g9983PortPm1DayIntervalMoniTime OBJECT-TYPE SYNTAX HCPerfTimeElapsed UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only count of seconds over which the performance data was actually monitored. This value will be the same as the interval duration (86400 seconds), except in a situation where performance data could not be collected for any reason.
g9983PortPm1DayIntervalMoniTime对象类型语法HCPerfTimeAppeated UNITS“seconds”MAX-ACCESS只读状态current DESCRIPTION“实际监视性能数据的只读秒数。此值将与间隔持续时间（86400秒）相同，但因任何原因无法收集性能数据的情况除外。
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalMoniSecs."
REFERENCE
"[TR-159], Section 5.5.1.64"
::= { g9983PortPm1DayEntry 2 }
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalMoniSecs."
REFERENCE
"[TR-159], Section 5.5.1.64"
::= { g9983PortPm1DayEntry 2 }
g9983PortPm1DayIntervalCrc4s OBJECT-TYPE SYNTAX HCPerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only count of CRC-4 errors on the G.Bond/TDIM port during the 1-day performance history interval.
g9983PortPm1DayIntervalCrc4s对象类型语法HCPerfIntervalCount MAX-ACCESS只读状态当前描述“在1天的性能历史记录间隔内，G.Bond/TDIM端口上CRC-4错误的只读计数。
This object is inhibited during Severely Errored Seconds (SES)
and Unavailable Seconds (UAS)."
::= { g9983PortPm1DayEntry 3 }
This object is inhibited during Severely Errored Seconds (SES)
and Unavailable Seconds (UAS)."
::= { g9983PortPm1DayEntry 3 }
g9983PortPm1DayIntervalCrc6s OBJECT-TYPE SYNTAX HCPerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only count of CRC-6 errors on the G.Bond/TDIM port during the 1-day performance history interval.
g9983PortPm1DayIntervalCrc6s对象类型语法HCPerfIntervalCount MAX-ACCESS只读状态当前描述“在1天的性能历史记录间隔内，G.Bond/TDIM端口上CRC-6错误的只读计数。
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983PortPm1DayEntry 4 }
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983PortPm1DayEntry 4 }
g9983PortPm1DayIntervalCrc8s OBJECT-TYPE SYNTAX HCPerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only count of CRC-8 errors on the G.Bond/TDIM port during the current 1-day performance interval.
g9983PortPm1DayIntervalCrc8s对象类型语法HCPerfIntervalCount MAX-ACCESS只读状态当前描述“当前1天性能间隔期间G.Bond/TDIM端口上CRC-8错误的只读计数。
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983PortPm1DayEntry 5 }
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983PortPm1DayEntry 5 }
g9983PortPm1DayIntervalValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only object indicating whether or not this history bucket contains valid data. A valid bucket is reported as true(1) and an invalid bucket as false(2). If this history bucket is invalid, the BTU-C MUST NOT produce notifications based upon the value of the counters in this bucket. Note that an implementation may decide not to store invalid history buckets in its database. In such a case, this object is not required, as only valid history buckets are available while invalid history buckets are simply not in the database.
G9983PortPM1DayInterVallid对象类型语法TruthValue MAX-ACCESS只读状态当前描述“一个只读对象，指示此历史存储桶是否包含有效数据。有效存储桶报告为true（1），无效存储桶报告为false（2）。如果此历史存储桶无效，BTU-C不得基于此存储桶中计数器的值生成通知。请注意，实现可能决定不在其数据库中存储无效的历史存储桶。在这种情况下，不需要此对象，因为只有有效的历史存储桶可用，而无效的历史存储桶不可用mply不在数据库中。
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalValid."
REFERENCE
"[TR-159], Section 5.5.1.63"
::= { g9983PortPm1DayEntry 6 }
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalValid."
REFERENCE
"[TR-159], Section 5.5.1.63"
::= { g9983PortPm1DayEntry 6 }
-- Services PM
--服务项目经理
g9983SvcPmCurTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983SvcPmCurEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains current Performance Monitoring information
for the services of a G.Bond/TDIM port.
This table contains live data from the equipment and as such is
NOT persistent."
::= { g9983PM 4 }
g9983SvcPmCurTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983SvcPmCurEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains current Performance Monitoring information
for the services of a G.Bond/TDIM port.
This table contains live data from the equipment and as such is
NOT persistent."
::= { g9983PM 4 }
g9983SvcPmCurEntry OBJECT-TYPE SYNTAX G9983SvcPmCurEntry
G9983SVCPMCrentry对象类型语法G9983SVCPMCrentry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Services PM table.
Each entry represents a service, indexed by the
g9983SvcIdx, in a G.Bond/TDIM port, indexed by the
ifIndex."
INDEX { ifIndex, g9983SvcIdx }
::= { g9983SvcPmCurTable 1 }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Services PM table.
Each entry represents a service, indexed by the
g9983SvcIdx, in a G.Bond/TDIM port, indexed by the
ifIndex."
INDEX { ifIndex, g9983SvcIdx }
::= { g9983SvcPmCurTable 1 }
G9983SvcPmCurEntry ::=
SEQUENCE {
g9983SvcPmCur15MinValidIntervals HCPerfValidIntervals,
g9983SvcPmCur15MinInvalidIntervals HCPerfInvalidIntervals,
g9983SvcPmCur15MinTimeElapsed HCPerfTimeElapsed,
g9983SvcPmCur15MinDowns HCPerfCurrentCount,
g9983SvcPmCur1DayValidIntervals Unsigned32,
g9983SvcPmCur1DayInvalidIntervals Unsigned32,
g9983SvcPmCur1DayTimeElapsed HCPerfTimeElapsed,
g9983SvcPmCur1DayDowns HCPerfCurrentCount
}
G9983SvcPmCurEntry ::=
SEQUENCE {
g9983SvcPmCur15MinValidIntervals HCPerfValidIntervals,
g9983SvcPmCur15MinInvalidIntervals HCPerfInvalidIntervals,
g9983SvcPmCur15MinTimeElapsed HCPerfTimeElapsed,
g9983SvcPmCur15MinDowns HCPerfCurrentCount,
g9983SvcPmCur1DayValidIntervals Unsigned32,
g9983SvcPmCur1DayInvalidIntervals Unsigned32,
g9983SvcPmCur1DayTimeElapsed HCPerfTimeElapsed,
g9983SvcPmCur1DayDowns HCPerfCurrentCount
}
g9983SvcPmCur15MinValidIntervals OBJECT-TYPE SYNTAX HCPerfValidIntervals MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only number of 15-minute intervals for which the performance data was collected. The value of this object will be 96 or the maximum number of 15-minute history intervals collected by the implementation, unless the measurement was (re)started recently, in which case the value will be the number of complete 15-minute intervals for which there are at least some data. In certain cases, it is possible that some intervals are unavailable. In this case, this object reports the maximum interval number for which data is available.
G9983SVCPMCUR15MValidIntervals对象类型语法HCPerfValidIntervals MAX-ACCESS只读状态当前说明“收集性能数据的15分钟间隔的只读数。除非最近（重新）开始测量，否则该对象的值将为96或实施收集的最大15分钟历史间隔数，在这种情况下，该值将是至少有一些数据的完整15分钟间隔数。在某些情况下，某些间隔可能不可用。在这种情况下，此对象报告数据可用的最大间隔数。
This object partially maps to the TR-159 attribute
aGroupPerf15MinValidIntervals."
REFERENCE
"[TR-159], Section 5.5.1.32"
::= { g9983SvcPmCurEntry 1 }
This object partially maps to the TR-159 attribute
aGroupPerf15MinValidIntervals."
REFERENCE
"[TR-159], Section 5.5.1.32"
::= { g9983SvcPmCurEntry 1 }
g9983SvcPmCur15MinInvalidIntervals OBJECT-TYPE SYNTAX HCPerfInvalidIntervals MAX-ACCESS read-only STATUS current
G9983SVCPMCUR15MINIValidintervals对象类型语法HcpPerfInvalidintervals MAX-ACCESS只读状态当前
DESCRIPTION "A read-only number of 15-minute intervals for which the performance data was not always available. The value will typically be zero, except in cases where the data for some intervals are not available.
DESCRIPTION“性能数据不总是可用的15分钟间隔的只读数。该值通常为零，除非某些间隔的数据不可用。
This object partially maps to the TR-159 attribute
aGroupPerf15MinInvalidIntervals."
REFERENCE
"[TR-159], Section 5.5.1.33"
::= { g9983SvcPmCurEntry 2 }
This object partially maps to the TR-159 attribute
aGroupPerf15MinInvalidIntervals."
REFERENCE
"[TR-159], Section 5.5.1.33"
::= { g9983SvcPmCurEntry 2 }
g9983SvcPmCur15MinTimeElapsed OBJECT-TYPE SYNTAX HCPerfTimeElapsed UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only count of seconds that have elapsed since the beginning of the current 15-minute performance interval.
G9983SVCPMCUR15MinimeExpressed对象类型语法HCPerfTimeExpressed UNITS“seconds”MAX-ACCESS只读状态current DESCRIPTION“自当前15分钟性能间隔开始以来已过的只读秒数。
This object partially maps to the TR-159 attribute
aGroupPerfCurr15MinTimeElapsed."
REFERENCE
"[TR-159], Section 5.5.1.34"
::= { g9983SvcPmCurEntry 3 }
This object partially maps to the TR-159 attribute
aGroupPerfCurr15MinTimeElapsed."
REFERENCE
"[TR-159], Section 5.5.1.34"
::= { g9983SvcPmCurEntry 3 }
g9983SvcPmCur15MinDowns OBJECT-TYPE SYNTAX HCPerfCurrentCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only count of seconds in the current 15-minute performance interval during which a particular TDIM service was 'down', as indicated by the g9983OperSvcState object.
g9983SvcPmCur15MinDowns对象类型语法HCPerfCurrentCount UNITS“seconds”MAX-ACCESS只读状态current DESCRIPTION“当前15分钟性能间隔内的只读秒数，在此期间，特定TDIM服务“关闭”，如g9983OperSvcState对象所示。
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983SvcPmCurEntry 4}
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983SvcPmCurEntry 4}
g9983SvcPmCur1DayValidIntervals OBJECT-TYPE SYNTAX Unsigned32 (0..7) UNITS "days" MAX-ACCESS read-only STATUS current
g9983SvcPmCur1DayValidIntervals对象类型语法无符号32（0..7）单位“天”最大访问只读状态当前
DESCRIPTION
"A read-only number of 1-day performance history intervals for
which the data was collected. The value of this object will be
7 or the maximum number of 1-day history intervals collected by
the implementation, unless the measurement was (re)started
recently, in which case the value will be the number of complete
1-day intervals for which there are at least some data.
In certain cases, it is possible that some intervals are
unavailable. In this case, this object reports the maximum
interval number for which data is available."
REFERENCE
"[TR-159], Section 5.5.1.45"
::= { g9983SvcPmCurEntry 5 }
DESCRIPTION
"A read-only number of 1-day performance history intervals for
which the data was collected. The value of this object will be
7 or the maximum number of 1-day history intervals collected by
the implementation, unless the measurement was (re)started
recently, in which case the value will be the number of complete
1-day intervals for which there are at least some data.
In certain cases, it is possible that some intervals are
unavailable. In this case, this object reports the maximum
interval number for which data is available."
REFERENCE
"[TR-159], Section 5.5.1.45"
::= { g9983SvcPmCurEntry 5 }
g9983SvcPmCur1DayInvalidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
UNITS "days"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 1-day performance history intervals for
which the performance data was not always available. The value
will typically be zero, except in cases where the data for some
intervals are not available."
REFERENCE
"[TR-159], Section 5.5.1.46"
::= { g9983SvcPmCurEntry 6 }
g9983SvcPmCur1DayInvalidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
UNITS "days"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 1-day performance history intervals for
which the performance data was not always available. The value
will typically be zero, except in cases where the data for some
intervals are not available."
REFERENCE
"[TR-159], Section 5.5.1.46"
::= { g9983SvcPmCurEntry 6 }
g9983SvcPmCur1DayTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds that have elapsed since the
beginning of the current 1-day performance interval."
REFERENCE
"[TR-159], Section 5.5.1.47"
::= { g9983SvcPmCurEntry 7 }
g9983SvcPmCur1DayTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds that have elapsed since the
beginning of the current 1-day performance interval."
REFERENCE
"[TR-159], Section 5.5.1.47"
::= { g9983SvcPmCurEntry 7 }
g9983SvcPmCur1DayDowns OBJECT-TYPE SYNTAX HCPerfCurrentCount UNITS "seconds" MAX-ACCESS read-only STATUS current
g9983SvcPmCur1DayDowns对象类型语法HCPerfCurrentCount单位“秒”最大访问只读状态当前
DESCRIPTION "A read-only count of seconds in the current 1-day performance interval during which a particular TDIM service was 'down', as indicated by the g9983OperSvcState object.
DESCRIPTION“当前1天性能间隔内的只读秒数，在此期间特定TDIM服务“关闭”，如g9983OperSvcState对象所示。
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983SvcPmCurEntry 8 }
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983SvcPmCurEntry 8 }
-- Service PM history: 15-min buckets
--维修PM历史记录：15分钟
g9983SvcPm15MinTable OBJECT-TYPE SYNTAX SEQUENCE OF G9983SvcPm15MinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains historical 15-minute buckets of Performance Monitoring information for the services of a G.Bond/TDIM port (a multi-dimensional row for each 15-minute interval, up to 96 intervals).
G9983SVCPM15MTABLE G9983SVCPM15MANTRY MAX-ACCESS的对象类型语法序列不可访问状态当前描述“此表包含G.Bond/TDIM端口服务的15分钟性能监控信息的历史存储桶（每15分钟间隔一个多维行，最多96个间隔）。
Entries in this table MUST be maintained in a persistent manner."
::= { g9983PM 5 }
Entries in this table MUST be maintained in a persistent manner."
::= { g9983PM 5 }
g9983SvcPm15MinEntry OBJECT-TYPE
SYNTAX G9983SvcPm15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Service historical 15-minute PM
table.
Each entry represents Performance Monitoring data for a
particular service, indexed by the g9983SvcIdx, in a G.Bond
TDIM port, indexed by the ifIndex, collected during a particular
15-minute interval, indexed by the
g9983SvcPm15MinIntervalIndex."
INDEX { ifIndex, g9983SvcIdx,
g9983SvcPm15MinIntervalIndex }
::= { g9983SvcPm15MinTable 1 }
g9983SvcPm15MinEntry OBJECT-TYPE
SYNTAX G9983SvcPm15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Service historical 15-minute PM
table.
Each entry represents Performance Monitoring data for a
particular service, indexed by the g9983SvcIdx, in a G.Bond
TDIM port, indexed by the ifIndex, collected during a particular
15-minute interval, indexed by the
g9983SvcPm15MinIntervalIndex."
INDEX { ifIndex, g9983SvcIdx,
g9983SvcPm15MinIntervalIndex }
::= { g9983SvcPm15MinTable 1 }
G9983SvcPm15MinEntry ::=
SEQUENCE {
g9983SvcPm15MinIntervalIndex Unsigned32,
g9983SvcPm15MinIntervalMoniTime HCPerfTimeElapsed,
g9983SvcPm15MinIntervalDowns HCPerfIntervalCount,
g9983SvcPm15MinIntervalValid TruthValue
}
G9983SvcPm15MinEntry ::=
SEQUENCE {
g9983SvcPm15MinIntervalIndex Unsigned32,
g9983SvcPm15MinIntervalMoniTime HCPerfTimeElapsed,
g9983SvcPm15MinIntervalDowns HCPerfIntervalCount,
g9983SvcPm15MinIntervalValid TruthValue
}
g9983SvcPm15MinIntervalIndex OBJECT-TYPE SYNTAX Unsigned32 (1..96) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance data interval number. 1 is the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are OPTIONAL.
g9983SvcPm15MinIntervalIndex对象类型语法Unsigned32（1..96）MAX-ACCESS不可访问状态当前描述“性能数据间隔号。1是最近的上一个间隔；间隔96是24小时前。间隔2..96是可选的。
This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalNumber."
REFERENCE
"[TR-159], Section 5.5.1.57"
::= { g9983SvcPm15MinEntry 1 }
This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalNumber."
REFERENCE
"[TR-159], Section 5.5.1.57"
::= { g9983SvcPm15MinEntry 1 }
g9983SvcPm15MinIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds over which the performance data
was actually monitored. This value will be the same as the
interval duration (900 seconds), except in a situation where
performance data could not be collected for any reason."
::= { g9983SvcPm15MinEntry 2 }
g9983SvcPm15MinIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds over which the performance data
was actually monitored. This value will be the same as the
interval duration (900 seconds), except in a situation where
performance data could not be collected for any reason."
::= { g9983SvcPm15MinEntry 2 }
g9983SvcPm15MinIntervalDowns OBJECT-TYPE SYNTAX HCPerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only count of seconds in the 15-minute performance history interval during which a particular TDIM service was 'down', as indicated by the g9983OperSvcState object.
g9983SvcPm15MinIntervalDowns对象类型语法HCPerfIntervalCount UNITS“seconds”MAX-ACCESS只读状态current DESCRIPTION“15分钟性能历史记录间隔内的只读秒数，在此期间，特定TDIM服务“关闭”，如g9983OperSvcState对象所示。
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983SvcPm15MinEntry 3 }
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983SvcPm15MinEntry 3 }
g9983SvcPm15MinIntervalValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only object indicating whether or not this history bucket contains valid data. A valid bucket is reported as true(1) and an invalid bucket as false(2).
g9983SvcPm15MinIntervalValid对象类型语法TruthValue MAX-ACCESS只读状态当前描述“一个只读对象，指示此历史存储桶是否包含有效数据。有效存储桶报告为true（1），无效存储桶报告为false（2）。
If this history bucket is invalid, the BTU-C MUST NOT produce notifications based upon the value of the counters in this bucket. Note that an implementation may decide not to store invalid history buckets in its database. In such a case, this object is not required, as only valid history buckets are available while invalid history buckets are simply not in the database.
如果此历史存储桶无效，BTU-C不得基于此存储桶中计数器的值生成通知。请注意，实现可能决定不在其数据库中存储无效的历史存储桶。在这种情况下，不需要此对象，因为只有有效的历史存储桶可用，而无效的历史存储桶根本不在数据库中。
This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalValid."
REFERENCE
"[TR-159], Section 5.5.1.58"
::= { g9983SvcPm15MinEntry 4 }
This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalValid."
REFERENCE
"[TR-159], Section 5.5.1.58"
::= { g9983SvcPm15MinEntry 4 }
-- Service PM history: 1-day buckets
--维修PM历史记录：1天
g9983SvcPm1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983SvcPm1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains historical 1-day buckets of Performance
Monitoring information for the services of a G.Bond/TDIM port
(a multi-dimensional row for each 1-day interval, up to 7
intervals).
Entries in this table MUST be maintained in a persistent manner."
::= { g9983PM 6 }
g9983SvcPm1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983SvcPm1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains historical 1-day buckets of Performance
Monitoring information for the services of a G.Bond/TDIM port
(a multi-dimensional row for each 1-day interval, up to 7
intervals).
Entries in this table MUST be maintained in a persistent manner."
::= { g9983PM 6 }
g9983SvcPm1DayEntry OBJECT-TYPE
SYNTAX G9983SvcPm1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Service historical 1-day PM table.
Each entry represents Performance Monitoring data for a
particular service, indexed by the g9983SvcIdx, defined in a
G.Bond/TDIM port, indexed by the ifIndex, collected during a
particular 1-day interval, indexed by the
g9983SvcPm1DayIntervalIndex."
INDEX { ifIndex, g9983SvcIdx,
g9983SvcPm1DayIntervalIndex }
::= { g9983SvcPm1DayTable 1 }
g9983SvcPm1DayEntry OBJECT-TYPE
SYNTAX G9983SvcPm1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Service historical 1-day PM table.
Each entry represents Performance Monitoring data for a
particular service, indexed by the g9983SvcIdx, defined in a
G.Bond/TDIM port, indexed by the ifIndex, collected during a
particular 1-day interval, indexed by the
g9983SvcPm1DayIntervalIndex."
INDEX { ifIndex, g9983SvcIdx,
g9983SvcPm1DayIntervalIndex }
::= { g9983SvcPm1DayTable 1 }
G9983SvcPm1DayEntry ::=
SEQUENCE {
g9983SvcPm1DayIntervalIndex Unsigned32,
g9983SvcPm1DayIntervalMoniTime HCPerfTimeElapsed,
g9983SvcPm1DayIntervalDowns HCPerfIntervalCount,
G9983SvcPm1DayEntry ::=
SEQUENCE {
g9983SvcPm1DayIntervalIndex Unsigned32,
g9983SvcPm1DayIntervalMoniTime HCPerfTimeElapsed,
g9983SvcPm1DayIntervalDowns HCPerfIntervalCount,
g9983SvcPm1DayIntervalValid TruthValue }
G9983SVCPM1DAYINTERVALID TruthValue}
g9983SvcPm1DayIntervalIndex OBJECT-TYPE SYNTAX Unsigned32 (1..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance data interval number. 1 is the most recent previous interval; interval 7 is 7 days ago. Intervals 2..7 are OPTIONAL.
g9983SvcPm1DayIntervalIndex对象类型语法Unsigned32（1..7）MAX-ACCESS不可访问状态当前描述“性能数据间隔号。1是最近的上一个间隔；间隔7是7天前。间隔2..7是可选的。
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalNumber."
REFERENCE
"[TR-159], Section 5.5.1.62"
::= { g9983SvcPm1DayEntry 1 }
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalNumber."
REFERENCE
"[TR-159], Section 5.5.1.62"
::= { g9983SvcPm1DayEntry 1 }
g9983SvcPm1DayIntervalMoniTime OBJECT-TYPE SYNTAX HCPerfTimeElapsed UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only count of seconds over which the performance data was actually monitored. This value will be the same as the interval duration (86400 seconds), except in a situation where performance data could not be collected for any reason.
g9983SvcPm1DayIntervalMoniTime对象类型语法HCPERFTIMEASED UNITS“秒”MAX-ACCESS只读状态当前描述“实际监视性能数据的只读秒数。此值将与间隔持续时间（86400秒）相同，但因任何原因无法收集性能数据的情况除外。
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalMoniSecs."
REFERENCE
"[TR-159], Section 5.5.1.64"
::= { g9983SvcPm1DayEntry 2 }
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalMoniSecs."
REFERENCE
"[TR-159], Section 5.5.1.64"
::= { g9983SvcPm1DayEntry 2 }
g9983SvcPm1DayIntervalDowns OBJECT-TYPE SYNTAX HCPerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only count of seconds in the 1-day performance history interval during which a particular TDIM service was 'down', as indicated by the g9983OperSvcState object.
g9983SvcPm1DayIntervalDowns对象类型语法HCPerfIntervalCount UNITS“seconds”MAX-ACCESS只读状态当前描述“在1天的性能历史记录间隔内，特定TDIM服务“关闭”的只读秒数，如g9983OperSvcState对象所示。
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983SvcPm1DayEntry 3 }
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983SvcPm1DayEntry 3 }
g9983SvcPm1DayIntervalValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only object indicating whether or not this history bucket contains valid data. A valid bucket is reported as true(1) and an invalid bucket as false(2). If this history bucket is invalid, the BTU-C MUST NOT produce notifications based upon the value of the counters in this bucket. Note that an implementation may decide not to store invalid history buckets in its database. In such a case, this object is not required, as only valid history buckets are available while invalid history buckets are simply not in the database.
G9983SVCPM1DAYINTERVALID对象类型语法TruthValue MAX-ACCESS只读状态当前描述“一个只读对象，指示此历史存储桶是否包含有效数据。有效存储桶报告为true（1），无效存储桶报告为false（2）。如果此历史存储桶无效，BTU-C不得基于此存储桶中计数器的值生成通知。请注意，实现可能决定不在其数据库中存储无效的历史存储桶。在这种情况下，不需要此对象，因为只有有效的历史存储桶可用，而无效的历史存储桶不可用mply不在数据库中。
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalValid."
REFERENCE
"[TR-159], Section 5.5.1.63"
::= { g9983SvcPm1DayEntry 4 }
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalValid."
REFERENCE
"[TR-159], Section 5.5.1.63"
::= { g9983SvcPm1DayEntry 4 }
-- -- Conformance Statements --
----一致性声明--
g9983Groups OBJECT IDENTIFIER
::= { g9983Conformance 1 }
g9983Groups OBJECT IDENTIFIER
::= { g9983Conformance 1 }
g9983Compliances OBJECT IDENTIFIER
::= { g9983Conformance 2 }
g9983Compliances OBJECT IDENTIFIER
::= { g9983Conformance 2 }
-- Object Groups
--对象组
g9983BasicGroup OBJECT-GROUP OBJECTS { g9983PortConfAdminServices, g9983PortStatCrc4Errors, g9983PortStatCrc6Errors, g9983PortStatCrc8Errors, g9983PortCapFecSupported, g9983OperSvcIdx, g9983OperSvcState, g9983SvcIfIdx, g9983SvcType,
g9983BasicGroup对象组对象{g9983PortConfAdminServices，g9983PortStatCrc4Errors，g9983PortStatCrc6Errors，g9983PortStatCrc8Errors，g9983PortCapFecSupported，G9983OperscIDX，G9983OperscState，g9983SvcIfIdx，g9983SvcType，
g9983SvcSize,
g9983SvcRowStatus,
g9983PortStatFltStatus
}
STATUS current
DESCRIPTION
"A collection of objects representing management information
for G.Bond/TDIM ports."
::= { g9983Groups 1 }
g9983SvcSize,
g9983SvcRowStatus,
g9983PortStatFltStatus
}
STATUS current
DESCRIPTION
"A collection of objects representing management information
for G.Bond/TDIM ports."
::= { g9983Groups 1 }
g9983FecGroup OBJECT-GROUP
OBJECTS {
g9983PortCapFecSupported,
g9983PortConfFecAdminState,
g9983PortStatFecOperState,
g9983PortConfFecWordSize,
g9983PortConfFecRedundancySize,
g9983PortConfFecInterleaverType,
g9983PortConfFecInterleaverDepth,
g9983PortCapFecMaxWordSize,
g9983PortCapFecMaxRedundancySize,
g9983PortCapFecInterleaverTypeSupported,
g9983PortCapFecMaxInterleaverDepth
}
STATUS current
DESCRIPTION
"A collection of objects supporting the OPTIONAL Forward Error
Correction (FEC) and Interleaver function in G.Bond/TDIM
ports."
::= { g9983Groups 2 }
g9983FecGroup OBJECT-GROUP
OBJECTS {
g9983PortCapFecSupported,
g9983PortConfFecAdminState,
g9983PortStatFecOperState,
g9983PortConfFecWordSize,
g9983PortConfFecRedundancySize,
g9983PortConfFecInterleaverType,
g9983PortConfFecInterleaverDepth,
g9983PortCapFecMaxWordSize,
g9983PortCapFecMaxRedundancySize,
g9983PortCapFecInterleaverTypeSupported,
g9983PortCapFecMaxInterleaverDepth
}
STATUS current
DESCRIPTION
"A collection of objects supporting the OPTIONAL Forward Error
Correction (FEC) and Interleaver function in G.Bond/TDIM
ports."
::= { g9983Groups 2 }
g9983AlarmConfGroup OBJECT-GROUP
OBJECTS {
g9983PortConfSvcUpDownEnable
}
STATUS current
DESCRIPTION
"A collection of objects required for configuration of alarm
thresholds and notifications in G.Bond/TDIM ports."
::= { g9983Groups 3 }
g9983AlarmConfGroup OBJECT-GROUP
OBJECTS {
g9983PortConfSvcUpDownEnable
}
STATUS current
DESCRIPTION
"A collection of objects required for configuration of alarm
thresholds and notifications in G.Bond/TDIM ports."
::= { g9983Groups 3 }
g9983NotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
g9983SvcUp,
g9983SvcDown
}
STATUS current
g9983NotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
g9983SvcUp,
g9983SvcDown
}
STATUS current
DESCRIPTION
"This group supports notifications of significant conditions
associated with G.Bond/TDIM ports."
::= { g9983Groups 4 }
DESCRIPTION
"This group supports notifications of significant conditions
associated with G.Bond/TDIM ports."
::= { g9983Groups 4 }
g9983PerfCurrGroup OBJECT-GROUP
OBJECTS {
g9983PortPmCur15MinValidIntervals,
g9983PortPmCur15MinInvalidIntervals,
g9983PortPmCur15MinTimeElapsed,
g9983PortPmCur15MinCrc4s,
g9983PortPmCur15MinCrc6s,
g9983PortPmCur15MinCrc8s,
g9983PortPmCur1DayValidIntervals,
g9983PortPmCur1DayInvalidIntervals,
g9983PortPmCur1DayTimeElapsed,
g9983PortPmCur1DayCrc4s,
g9983PortPmCur1DayCrc6s,
g9983PortPmCur1DayCrc8s,
g9983SvcPmCur15MinValidIntervals,
g9983SvcPmCur15MinInvalidIntervals,
g9983SvcPmCur15MinTimeElapsed,
g9983SvcPmCur15MinDowns,
g9983SvcPmCur1DayValidIntervals,
g9983SvcPmCur1DayInvalidIntervals,
g9983SvcPmCur1DayTimeElapsed,
g9983SvcPmCur1DayDowns
}
STATUS current
DESCRIPTION
"A collection of objects supporting OPTIONAL current Performance
Monitoring information for G.Bond/TDIM ports."
::= { g9983Groups 5 }
g9983PerfCurrGroup OBJECT-GROUP
OBJECTS {
g9983PortPmCur15MinValidIntervals,
g9983PortPmCur15MinInvalidIntervals,
g9983PortPmCur15MinTimeElapsed,
g9983PortPmCur15MinCrc4s,
g9983PortPmCur15MinCrc6s,
g9983PortPmCur15MinCrc8s,
g9983PortPmCur1DayValidIntervals,
g9983PortPmCur1DayInvalidIntervals,
g9983PortPmCur1DayTimeElapsed,
g9983PortPmCur1DayCrc4s,
g9983PortPmCur1DayCrc6s,
g9983PortPmCur1DayCrc8s,
g9983SvcPmCur15MinValidIntervals,
g9983SvcPmCur15MinInvalidIntervals,
g9983SvcPmCur15MinTimeElapsed,
g9983SvcPmCur15MinDowns,
g9983SvcPmCur1DayValidIntervals,
g9983SvcPmCur1DayInvalidIntervals,
g9983SvcPmCur1DayTimeElapsed,
g9983SvcPmCur1DayDowns
}
STATUS current
DESCRIPTION
"A collection of objects supporting OPTIONAL current Performance
Monitoring information for G.Bond/TDIM ports."
::= { g9983Groups 5 }
g9983Perf15MinGroup OBJECT-GROUP
OBJECTS {
g9983PortPm15MinIntervalMoniTime,
g9983PortPm15MinIntervalCrc4s,
g9983PortPm15MinIntervalCrc6s,
g9983PortPm15MinIntervalCrc8s,
g9983PortPm15MinIntervalValid,
g9983SvcPm15MinIntervalMoniTime,
g9983SvcPm15MinIntervalDowns,
g9983SvcPm15MinIntervalValid
}
STATUS current
g9983Perf15MinGroup OBJECT-GROUP
OBJECTS {
g9983PortPm15MinIntervalMoniTime,
g9983PortPm15MinIntervalCrc4s,
g9983PortPm15MinIntervalCrc6s,
g9983PortPm15MinIntervalCrc8s,
g9983PortPm15MinIntervalValid,
g9983SvcPm15MinIntervalMoniTime,
g9983SvcPm15MinIntervalDowns,
g9983SvcPm15MinIntervalValid
}
STATUS current
DESCRIPTION
"A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond/TDIM ports, during
previous 15-minute intervals."
::= { g9983Groups 6 }
DESCRIPTION
"A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond/TDIM ports, during
previous 15-minute intervals."
::= { g9983Groups 6 }
g9983Perf1DayGroup OBJECT-GROUP
OBJECTS {
g9983PortPm1DayIntervalMoniTime,
g9983PortPm1DayIntervalCrc4s,
g9983PortPm1DayIntervalCrc6s,
g9983PortPm1DayIntervalCrc8s,
g9983PortPm1DayIntervalValid,
g9983SvcPm1DayIntervalMoniTime,
g9983SvcPm1DayIntervalDowns,
g9983SvcPm1DayIntervalValid
}
STATUS current
DESCRIPTION
"A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond/TDIM ports, during
previous 1-day intervals."
::= { g9983Groups 7 }
g9983Perf1DayGroup OBJECT-GROUP
OBJECTS {
g9983PortPm1DayIntervalMoniTime,
g9983PortPm1DayIntervalCrc4s,
g9983PortPm1DayIntervalCrc6s,
g9983PortPm1DayIntervalCrc8s,
g9983PortPm1DayIntervalValid,
g9983SvcPm1DayIntervalMoniTime,
g9983SvcPm1DayIntervalDowns,
g9983SvcPm1DayIntervalValid
}
STATUS current
DESCRIPTION
"A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond/TDIM ports, during
previous 1-day intervals."
::= { g9983Groups 7 }
-- Compliance Statements
--合规声明
g9983Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for G.Bond/TDIM interfaces. Compliance with the following external compliance statements is REQUIRED:
G9983合规模块-合规状态当前说明“G.Bond/TDIM接口的合规声明。需要符合以下外部合规声明：
MIB Module Compliance Statement
---------- --------------------
IF-MIB ifCompliance3
GBOND-MIB gBondCompliance"
MIB Module Compliance Statement
---------- --------------------
IF-MIB ifCompliance3
GBOND-MIB gBondCompliance"
MODULE -- this module
MANDATORY-GROUPS {
g9983BasicGroup,
g9983AlarmConfGroup,
g9983NotificationGroup
}
MODULE -- this module
MANDATORY-GROUPS {
g9983BasicGroup,
g9983AlarmConfGroup,
g9983NotificationGroup
}
GROUP g9983FecGroup
g9983FecGroup组
DESCRIPTION "Support for this group is only required for implementations supporting the G.Bond/TDIM FEC and Interleaver function."
说明“仅支持G.Bond/TDIM FEC和交织器功能的实现需要对该组的支持。”
GROUP g9983PerfCurrGroup DESCRIPTION "Support for this group is only required for implementations supporting Performance Monitoring."
GROUP g9983PerfCurrGroup DESCRIPTION“仅支持性能监视的实施需要对此组的支持。”
GROUP g9983Perf15MinGroup DESCRIPTION "Support for this group is only required for implementations supporting historical Performance Monitoring."
GROUP G9983Perf15单组说明“仅支持历史性能监控的实现需要对此组的支持。”
GROUP g9983Perf1DayGroup DESCRIPTION "Support for this group is only required for implementations supporting historical Performance Monitoring."
GROUP g9983Perf1DayGroup DESCRIPTION“只有支持历史性能监控的实现才需要对此组的支持。”
::= { g9983Compliances 1 }
END
::= { g9983Compliances 1 }
END
There are a number of managed objects defined in this MIB module with a MAX-ACCESS clause of read-write and/or read-create. Such objects may be considered sensitive or vulnerable in some network environments. The support for SET operations in a non-secure environment without proper protection can have a negative effect on network operations. These are the tables and objects and their sensitivity/vulnerability:
此MIB模块中定义了许多托管对象，其MAX-ACCESS子句为read-write和/或read-create。在某些网络环境中，此类对象可能被视为敏感或易受攻击。在没有适当保护的非安全环境中支持SET操作可能会对网络操作产生负面影响。以下是表和对象及其敏感度/漏洞：
o Changing of the g9983PortConfAdminServices object may lead to a potential service disruption, by changing a particular service's position (therefore changing its drop priority) or even removing the service from the link altogether.
o 更改g9983PortConfAdminServices对象可能会导致潜在的服务中断，方法是更改特定服务的位置（因此更改其丢弃优先级），甚至从链接中删除该服务。
o Changing of g9983SvcTable configuration parameters (e.g., g9983SvcType or g9983SvcSize) may lead to a potential service impairment; for example, a TDM service would be dropped if there is not enough actual bandwidth on the bonded link to support this service.
o 更改g9983SvcTable配置参数（例如g9983SvcType或g9983SvcSize）可能导致潜在的服务损害；例如，如果保税链路上没有足够的实际带宽来支持该服务，则TDM服务将被丢弃。
o Changing of g9983PortConfTable configuration parameters (e.g., g9983PortConfFecAdminState) may lead to anything from link quality and rate degradation to a complete link initialization failure.
o 更改g9983PortConfTable配置参数（例如g9983PortConfFecAdminState）可能会导致从链路质量和速率降级到完全链路初始化失败的任何情况。
Some of the readable objects in this MIB module (i.e., those with MAX-ACCESS other than not-accessible) may be considered sensitive or vulnerable in some network environments since, collectively, they provide information about the performance of network interfaces and can reveal some aspects of their configuration.
在某些网络环境中，此MIB模块中的一些可读对象（即具有MAX-ACCESS而非不可访问的对象）可能被视为敏感或易受攻击，因为它们共同提供了有关网络接口性能的信息，并且可以揭示其配置的某些方面。
In particular, since a bonded xDSL port can be comprised of multiple Unshielded Twisted Pair (UTP) voice-grade copper, located in the same bundle with other pairs belonging to another operator/customer, it is theoretically possible to eavesdrop on a G.Bond transmission, simply by "listening" to cross-talk from the bonded pairs, especially if the operating parameters of the G.Bond link in question are known.
特别是，由于绑定的xDSL端口可以由多个非屏蔽双绞线（UTP）语音级铜组成，与属于另一运营商/客户的其他线对位于同一束中，因此理论上可以通过简单地“监听”来自绑定线对的串扰来窃听G.Bond传输，特别是在已知G.Bond link的运行参数的情况下。
It is thus important to control even GET and/or NOTIFY access to these objects and possibly to even encrypt the values of these objects when sending them over the network via SNMP. These are the tables and objects and their sensitivity/vulnerability:
因此，在通过SNMP通过网络发送这些对象时，控制甚至获取和/或通知对这些对象的访问，甚至可能加密这些对象的值，这一点非常重要。以下是表和对象及其敏感度/漏洞：
o g9983PortStatFecOperState in the g9983PortStatTable indicates whether the FEC function is enabled, which may aid in deciphering the G.Bond/TDIM transmissions.
o g9983PortStatTable中的g9983PortStatFecOperState指示FEC功能是否启用，这可能有助于破译G.Bond/TDIM传输。
o The g9983OperSvcTable provides current operational service configuration, which may aid in deciphering the G.Bond/TDIM transmissions.
o g9983OperSvcTable提供当前运行服务配置，这可能有助于破译G.Bond/TDIM传输。
SNMP versions prior to SNMPv3 did not include adequate security. Even if the network itself is secure (for example by using IPsec), there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB module.
SNMPv3之前的SNMP版本未包含足够的安全性。即使网络本身是安全的（例如通过使用IPsec），也无法控制安全网络上的谁可以访问和获取/设置（读取/更改/创建/删除）此MIB模块中的对象。
Implementations SHOULD provide the security features described by the
SNMPv3 framework (see [RFC3410]), and implementations claiming
compliance to the SNMPv3 standard MUST include full support for
authentication and privacy via the User-based Security Model (USM)
[RFC3414] with the AES cipher algorithm [RFC3826]. Implementations
MAY also provide support for the Transport Security Model (TSM)
[RFC5591] in combination with a secure transport such as SSH
[RFC5592] or TLS/DTLS [RFC6353].
Implementations SHOULD provide the security features described by the
SNMPv3 framework (see [RFC3410]), and implementations claiming
compliance to the SNMPv3 standard MUST include full support for
authentication and privacy via the User-based Security Model (USM)
[RFC3414] with the AES cipher algorithm [RFC3826]. Implementations
MAY also provide support for the Transport Security Model (TSM)
[RFC5591] in combination with a secure transport such as SSH
[RFC5592] or TLS/DTLS [RFC6353].
Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of this MIB module is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them.
此外，不建议部署SNMPv3之前的SNMP版本。相反，建议部署SNMPv3并启用加密安全性。然后，客户/运营商应负责确保授予访问此MIB模块实例权限的SNMP实体已正确配置为仅授予那些拥有确实获取或设置（更改/创建/删除）对象的合法权限的主体（用户）访问对象。
IANA has allocated value 210 as the Object identifier for g9983MIB MODULE-IDENTITY <http://www.iana.org/> in the MIB-2 transmission sub-tree.
IANA已分配值210作为g9983MIB MODULE-IDENTITY的对象标识符<http://www.iana.org/>在MIB-2传输子树中。
This document was produced by the [ADSLMIB] working group.
本文件由[ADSLMIB]工作组编制。
Special thanks to Dan Romascanu for his meticulous review of this text.
特别感谢Dan Romascanu对本文的仔细审阅。
[G.998.3] ITU-T, "Multi-pair bonding using time-division inverse multiplexing", ITU-T Recommendation G.998.3, January 2005, <http://www.itu.int/rec/T-REC-G.998.3/en>.
[G.998.3]ITU-T，“使用时分反向复用的多对键合”，ITU-T建议G.998.3，2005年1月<http://www.itu.int/rec/T-REC-G.998.3/en>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2119]Bradner，S.，“RFC中用于表示需求水平的关键词”，BCP 14，RFC 2119，1997年3月。
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2578]McCloghrie，K.，Ed.，Perkins，D.，Ed.，和J.Schoenwaeld，Ed.“管理信息的结构版本2（SMIv2）”，STD 58，RFC 2578，1999年4月。
[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999.
[RFC2579]McCloghrie，K.，Ed.，Perkins，D.，Ed.，和J.Schoenwaeld，Ed.“SMIv2的文本约定”，STD 58，RFC 2579，1999年4月。
[RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999.
[RFC2580]McCloghrie，K.，Perkins，D.，和J.Schoenwaeld，“SMIv2的一致性声明”，STD 58，RFC 25801999年4月。
[RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces Group MIB", RFC 2863, June 2000.
[RFC2863]McCloghrie，K.和F.Kastenholz，“接口组MIB”，RFC 28632000年6月。
[RFC3414] Blumenthal, U. and B. Wijnen, "User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)", STD 62, RFC 3414, December 2002.
[RFC3414]Blumenthal，U.和B.Wijnen，“简单网络管理协议（SNMPv3）版本3的基于用户的安全模型（USM）”，STD 62，RFC 3414，2002年12月。
[RFC3705] Ray, B. and R. Abbi, "High Capacity Textual Conventions for MIB Modules Using Performance History Based on 15 Minute Intervals", RFC 3705, February 2004.
[RFC3705]Ray，B.和R.Abbi，“使用基于15分钟间隔的性能历史记录的MIB模块的高容量文本约定”，RFC 3705，2004年2月。
[RFC3826] Blumenthal, U., Maino, F., and K. McCloghrie, "The Advanced Encryption Standard (AES) Cipher Algorithm in the SNMP User-based Security Model", RFC 3826, June 2004.
[RFC3826]Blumenthal，U.，Maino，F.，和K.McCloghrie，“基于SNMP用户的安全模型中的高级加密标准（AES）密码算法”，RFC 3826，2004年6月。
[RFC5591] Harrington, D. and W. Hardaker, "Transport Security Model for the Simple Network Management Protocol (SNMP)", RFC 5591, June 2009.
[RFC5591]Harrington，D.和W.Hardaker，“简单网络管理协议（SNMP）的传输安全模型”，RFC 55912009年6月。
[RFC5592] Harrington, D., Salowey, J., and W. Hardaker, "Secure Shell Transport Model for the Simple Network Management Protocol (SNMP)", RFC 5592, June 2009.
[RFC5592]Harrington，D.，Salowey，J.，和W.Hardaker，“简单网络管理协议（SNMP）的安全外壳传输模型”，RFC 55922009年6月。
[RFC6353] Hardaker, W., "Transport Layer Security (TLS) Transport Model for the Simple Network Management Protocol (SNMP)", RFC 6353, July 2011.
[RFC6353]Hardaker，W.“简单网络管理协议（SNMP）的传输层安全（TLS）传输模型”，RFC 63532011年7月。
[RFC6765] Beili, E. and M. Morgenstern, "xDSL Multi-Pair Bonding (G.Bond) MIB", RFC 6765, February 2013.
[RFC6765]Beili，E.和M.Morgenstern，“xDSL多对键合（G.Bond）MIB”，RFC 67652013年2月。
[TR-159] Beili, E. and M. Morgenstern, "Management Framework for xDSL Bonding", Broadband Forum Technical Report TR-159, December 2008, <http://www.broadband-forum.org/technical/ download/TR-159.pdf>.
[TR-159]Beili，E.和M.Morgenstern，“xDSL连接的管理框架”，宽带论坛技术报告TR-159，2008年12月<http://www.broadband-forum.org/technical/ 下载/TR-159.pdf>。
[ADSLMIB] IETF, "ADSL MIB (adslmib) Charter", <http://datatracker.ietf.org/wg/adslmib/charter/>.
[ADSLMIB]IETF，“ADSL MIB（ADSLMIB）章程”<http://datatracker.ietf.org/wg/adslmib/charter/>.
[G.704] ITU-T, "Synchronous frame structures used at 1544, 6312, 2048, 8448 and 44 736 kbit/s hierarchical levels", ITU-T Recommendation G.704, October 1998, <http://www.itu.int/rec/T-REC-G.704/en>.
[G.704]ITU-T，“在154463120488448和44736kbit/s分层级别使用的同步帧结构”，ITU-T建议G.704，1998年10月<http://www.itu.int/rec/T-REC-G.704/en>.
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction and Applicability Statements for Internet-Standard Management Framework", RFC 3410, December 2002.
[RFC3410]Case，J.，Mundy，R.，Partain，D.，和B.Stewart，“互联网标准管理框架的介绍和适用性声明”，RFC 34102002年12月。
[RFC3593] Tesink, K., "Textual Conventions for MIB Modules Using Performance History Based on 15 Minute Intervals", RFC 3593, September 2003.
[RFC3593]Tesink，K.“使用基于15分钟间隔的性能历史记录的MIB模块的文本约定”，RFC 3593，2003年9月。
[RFC4181] Heard, C., "Guidelines for Authors and Reviewers of MIB Documents", BCP 111, RFC 4181, September 2005.
[RFC4181]Heard，C.，“MIB文件的作者和评审者指南”，BCP 111，RFC 41812005年9月。
Author's Address
作者地址
Edward Beili Actelis Networks 25 Bazel St. Petach-Tikva 49103 Israel
Edward Beili Actelis Networks 25 Bazel St.Petach Tikva以色列49103
Phone: +972-3-924-3491
EMail: edward.beili@actelis.com
Phone: +972-3-924-3491
EMail: edward.beili@actelis.com