Network Working Group C. DeSanti
Request for Comments: 4935 H.K. Vivek
Category: Standards Track K. McCloghrie
Cisco Systems
S. Gai
Nuova Systems
August 2007
Network Working Group C. DeSanti
Request for Comments: 4935 H.K. Vivek
Category: Standards Track K. McCloghrie
Cisco Systems
S. Gai
Nuova Systems
August 2007
Fibre Channel Fabric Configuration Server MIB
光纤通道结构配置服务器MIB
Status of This Memo
关于下段备忘
This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.
本文件规定了互联网社区的互联网标准跟踪协议，并要求进行讨论和提出改进建议。有关本协议的标准化状态和状态，请参考当前版本的“互联网官方协议标准”（STD 1）。本备忘录的分发不受限制。
Copyright Notice
版权公告
Copyright (C) The IETF Trust (2007).
版权所有（C）IETF信托基金（2007年）。
Abstract
摘要
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for information related to the Fabric Configuration Server function of a Fibre Channel network.
此备忘录定义了管理信息库（MIB）的一部分，用于Internet社区中的网络管理协议。特别是，它描述了与光纤通道网络的结构配置服务器功能相关的信息的托管对象。
Table of Contents
目录
1. Introduction ....................................................3
2. The Internet-Standard Management Framework ......................3
3. Short Overview of Fibre Channel .................................3
4. Relationship to Other MIBs ......................................5
5. MIB Overview ....................................................5
5.1. Fibre Channel Management Instance ..........................6
5.2. Switch Index ...............................................6
5.3. Fabric Index ...............................................6
5.4. The MIB Groups .............................................7
5.5. OS Logical Unit Number (LUN) Map Entries ...................8
6. The T11-FC-FABRIC-CONFIG-SERVER-MIB Module ......................9
7. IANA Considerations ............................................45
8. Security Considerations ........................................45
9. Acknowledgements ...............................................46
10. Normative References ..........................................47
11. Informative References ........................................48
1. Introduction ....................................................3
2. The Internet-Standard Management Framework ......................3
3. Short Overview of Fibre Channel .................................3
4. Relationship to Other MIBs ......................................5
5. MIB Overview ....................................................5
5.1. Fibre Channel Management Instance ..........................6
5.2. Switch Index ...............................................6
5.3. Fabric Index ...............................................6
5.4. The MIB Groups .............................................7
5.5. OS Logical Unit Number (LUN) Map Entries ...................8
6. The T11-FC-FABRIC-CONFIG-SERVER-MIB Module ......................9
7. IANA Considerations ............................................45
8. Security Considerations ........................................45
9. Acknowledgements ...............................................46
10. Normative References ..........................................47
11. Informative References ........................................48
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for information related to a Fibre Channel network's Fabric Configuration Server function, which provides a means by which a management application can discover Fibre Channel fabric topology and attributes. Discovered topology includes Interconnect Elements (i.e., switches, hubs, bridges, etc.) and their ports, as well as "platforms" that consist of one or more Fibre Channel nodes.
此备忘录定义了管理信息库（MIB）的一部分，用于Internet社区中的网络管理协议。特别是，它描述了与光纤通道网络的结构配置服务器功能相关的信息的托管对象，该功能提供了一种管理应用程序可以发现光纤通道结构拓扑和属性的方法。发现的拓扑包括互连元件（即交换机、集线器、网桥等）及其端口，以及由一个或多个光纤通道节点组成的“平台”。
This memo was previously approved by INternational Committee for Information Technology Standards (INCITS) Task Group T11.5 (http://www.t11.org); this document is a product of the IETF's IMSS working group.
本备忘录先前由国际信息技术标准委员会（INCITS）工作组T11.5批准(http://www.t11.org); 本文件是IETF IMSS工作组的产品。
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14, RFC 2119 [RFC2119].
本文件中的关键词“必须”、“不得”、“必需”、“应”、“不应”、“应”、“不应”、“建议”、“可”和“可选”应按照BCP 14、RFC 2119[RFC2119]中的说明进行解释。
For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [RFC3410].
有关描述当前互联网标准管理框架的文件的详细概述，请参阅RFC 3410[RFC3410]第7节。
Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580].
托管对象通过虚拟信息存储（称为管理信息库或MIB）进行访问。MIB对象通常通过简单网络管理协议（SNMP）进行访问。MIB中的对象是使用管理信息结构（SMI）中定义的机制定义的。本备忘录规定了符合SMIv2的MIB模块，如STD 58、RFC 2578[RFC2578]、STD 58、RFC 2579[RFC2579]和STD 58、RFC 2580[RFC2580]所述。
The Fibre Channel (FC) is logically a bidirectional point-to-point serial data channel, structured for high performance. Fibre Channel provides a general transport vehicle for higher-level protocols such as Small Computer System Interface (SCSI) command sets, the High-Performance Parallel Interface (HIPPI) data framing, IP (Internet Protocol), IEEE 802.2, and others.
光纤通道（FC）在逻辑上是一种双向点对点串行数据通道，其结构旨在实现高性能。光纤通道为高级协议（如小型计算机系统接口（SCSI）命令集、高性能并行接口（HIPI）数据帧、IP（Internet协议）、IEEE 802.2等）提供了通用传输工具。
Physically, Fibre Channel is an interconnection of multiple communication points, called N_Ports, interconnected either by a
从物理上讲，光纤通道是多个通信点（称为N_端口）的互连，这些通信点通过
switching network, called a Fabric, or by a point-to-point link. A Fibre Channel "node" consists of one or more N_Ports. A Fabric may consist of multiple Interconnect Elements, some of which are switches. An N_Port connects to the Fabric via a port on a switch called an F_Port. When multiple FC nodes are connected to a single port on a switch via an "Arbitrated Loop" topology, the switch port is called an FL_Port, and the nodes' ports are called NL_Ports. The term Nx_Port is used to refer to either an N_Port or an NL_Port. The term Fx_Port is used to refer to either an F_Port or an FL_Port. A switch port, which is interconnected to another switch port via an Inter-Switch Link (ISL), is called an E_Port. A B_Port connects a bridge device with an E_Port on a switch; a B_Port provides a subset of E_Port functionality.
交换网络，称为结构，或通过点对点链路。光纤通道“节点”由一个或多个N_端口组成。一个结构可以由多个互连元件组成，其中一些是交换机。N_端口通过交换机上称为F_端口的端口连接到结构。当多个FC节点通过“仲裁环路”拓扑连接到交换机上的单个端口时，交换机端口称为FL_端口，节点的端口称为NL_端口。术语Nx_端口用于指N_端口或NL_端口。术语Fx_端口用于指F_端口或FL_端口。通过交换机间链路（ISL）与另一个交换机端口互连的交换机端口称为E_端口。B_端口将桥接设备与交换机上的E_端口连接起来；B_端口提供E_端口功能的子集。
Many Fibre Channel components, including the Fabric, each node, and most ports, have globally unique names. These globally unique names are typically formatted as World Wide Names (WWNs). More information on WWNs can be found in [FC-FS]. WWNs are expected to be persistent across agent and unit resets.
许多光纤通道组件（包括光纤网、每个节点和大多数端口）具有全局唯一的名称。这些全局唯一的名称通常格式化为全球通用名称（WWN）。有关WWN的更多信息，请参见[FC-FS]。WWN预计将在代理和单元重置之间保持不变。
Fibre Channel frames contain 24-bit address identifiers that identify the frame's source and destination ports. Each FC port has both an address identifier and a WWN. When a Fabric is in use, the FC address identifiers are dynamic and are assigned by a switch. Each octet of a 24-bit address represents a level in an address hierarchy, with a Domain_ID being the highest level of the hierarchy.
光纤通道帧包含24位地址标识符，用于标识帧的源端口和目标端口。每个FC端口都有地址标识符和WWN。在使用结构时，FC地址标识符是动态的，由交换机分配。24位地址的每个八位字节表示地址层次结构中的一个级别，域ID是层次结构中的最高级别。
The Fibre Channel Fabric Configuration Server provides a way for a management application to discover Fibre Channel fabric topology and attributes. The Fabric Configuration Server is designed so that it can be distributed among switches and accessed from any Nx_Port. However, the Fabric Configuration Server is not restricted or required to be part of/within a Fabric.
光纤通道结构配置服务器为管理应用程序提供了一种发现光纤通道结构拓扑和属性的方法。结构配置服务器的设计使其可以分布在交换机之间，并可以从任何Nx_端口访问。但是，结构配置服务器不受限制或不要求是结构的一部分或在结构内。
The information registered with and available from each Fabric Configuration Server is modeled as a Fabric consisting of one or more Interconnect Elements that each have some number of physical Ports, and one or more Fibre Channel nodes grouped together into Platforms to facilitate discovery and management. The Ports are connected either to other Ports on other Interconnect Elements, or to Nx_Ports. Each Interconnect Element may have attributes including its name, type, Domain Identifier, Management Identifier, Logical Name, Management Address(es), Information List, Zoning Enforcement Status, etc. Each Port may have attributes including its name, type, TX type, Module type, physical port number, attached port name(s), port state, speed, etc. Each platform may have attributes including its name, type, description, label, location, management address, etc.
向每个结构配置服务器注册并从中获得的信息被建模为一个结构，该结构由一个或多个互连元素组成，每个互连元素都有一定数量的物理端口，以及一个或多个光纤通道节点，这些节点被分组到多个平台中，以便于发现和管理。这些端口要么连接到其他互连元件上的其他端口，要么连接到Nx_端口。每个互连元件可能具有包括其名称、类型、域标识符、管理标识符、逻辑名称、管理地址、信息列表、分区实施状态等在内的属性。每个端口可能具有包括其名称、类型、发送类型、模块类型、物理端口号、连接端口名、端口状态、速度、，每个平台可能有属性，包括其名称、类型、描述、标签、位置、管理地址等。
The Fibre Channel Fabric Configuration Server is defined in the FC-GS specification. The Fabric Configuration Server is one of a set of functions that are collectively known as the Management Service. The latest version of the specification is [FC-GS-5].
光纤通道结构配置服务器在FC-GS规范中定义。结构配置服务器是统称为管理服务的一组功能之一。本规范的最新版本为[FC-GS-5]。
The latest standard for an interconnecting Fabric containing multiple Fabric Switch elements is [FC-SW-4]. [FC-SW-4] carries forward the earlier specification for the operation of a single Fabric in a physical infrastructure, and augments it with the definition of Virtual Fabrics and with the specification of how multiple Virtual Fabrics can operate within one (or more) physical infrastructures. The use of Virtual Fabrics provides for each frame to be tagged in its header to indicate which one of several Virtual Fabrics that frame is being transmitted on. All frames entering a particular "Core Switch" [FC-SW-4] (i.e., a physical switch) on the same Virtual Fabric are processed by the same "Virtual Switch" within that Core Switch.
包含多个结构交换机元件的互连结构的最新标准为[FC-SW-4]。[FC-SW-4]继承了物理基础设施中单个结构操作的早期规范，并通过虚拟结构的定义和多个虚拟结构如何在一个（或多个）物理基础设施中操作的规范对其进行了补充。虚拟结构的使用为每个帧提供了在其标头中标记的功能，以指示该帧在多个虚拟结构中的哪一个上传输。进入同一虚拟结构上特定“核心交换机”[FC-SW-4]（即物理交换机）的所有帧都由该核心交换机内的同一“虚拟交换机”处理。
The first standardized MIB for Fibre Channel [RFC2837] was focused on Fibre Channel switches. It has been replaced by the more generic Fibre Channel Management MIB [RFC4044], which defines basic information for Fibre Channel hosts and switches, including extensions to the standard IF-MIB for Fibre Channel interfaces.
光纤通道的第一个标准化MIB[RFC2837]集中于光纤通道交换机。它已被更通用的光纤通道管理MIB[RFC4044]所取代，该MIB定义了光纤通道主机和交换机的基本信息，包括光纤通道接口标准IF-MIB的扩展。
This MIB extends beyond [RFC4044] to cover the functionality, in Fibre Channel switches, of providing Fibre Channel's Fabric Configuration Server function.
此MIB扩展到[RFC4044]之外，以涵盖光纤通道交换机中提供光纤通道结构配置服务器功能的功能。
This MIB imports some common Textual Conventions from T11-TC-MIB [RFC4439] and from T11-FC-NAME-SERVER-MIB [RFC4438]. It also imports URLString from NETWORK-SERVICES-MIB [RFC2788].
此MIB从T11-TC-MIB[RFC4439]和T11-FC-NAME-SERVER-MIB[RFC4438]导入一些常见的文本约定。它还从NETWORK-SERVICES-MIB[RFC2788]导入URLString。
This MIB module provides the means for monitoring the operation of, and configuring some parameters of, one or more Fabric Configuration Servers (FCS) in a Fibre Channel (FC) network. The capabilities provided include triggering a discovery of the configuration of one or more Fabrics, retrieving the results of such a discovery, as well as controlling and monitoring the operation of an FCS. The discovered configuration contains information about:
此MIB模块提供了监视光纤通道（FC）网络中一个或多个结构配置服务器（FC）的操作和配置其某些参数的方法。提供的能力包括触发一个或多个结构配置的发现、检索此类发现的结果以及控制和监控FCS的运行。发现的配置包含以下信息：
- Interconnect Elements (IEs), i.e., switches, hubs, bridges, etc., - Ports on IEs, and - Platforms that consist of one or more FC nodes.
- 互连元件（IE），即交换机、集线器、网桥等——IE上的端口，以及——由一个或多个FC节点组成的平台。
A Fibre Channel management instance is defined in [RFC4044] as a separable managed instance of Fibre Channel functionality. Fibre Channel functionality may be grouped into Fibre Channel management instances in whatever way is most convenient for the implementation(s). For example, one such grouping accommodates a single SNMP agent having multiple AgentX [RFC2741] sub-agents, with each sub-agent implementing a different Fibre Channel management instance.
[RFC4044]中将光纤通道管理实例定义为光纤通道功能的可分离托管实例。光纤通道功能可以以对实施最方便的方式分组到光纤通道管理实例中。例如，一个这样的分组容纳具有多个AgentX[RFC2741]子代理的单个SNMP代理，每个子代理实现不同的光纤通道管理实例。
The object, fcmInstanceIndex, is IMPORTed from the FC-MGMT-MIB [RFC4044] as the index value to uniquely identify each Fibre Channel management instance, for example, within the same SNMP context ([RFC3411], section 3.3.1).
对象fcmInstanceIndex作为索引值从FC-MGMT-MIB[RFC4044]导入，以唯一标识每个光纤通道管理实例，例如，在同一SNMP上下文中（[RFC3411]，第3.3.1节）。
The FC-MGMT-MIB [RFC4044] defines the fcmSwitchTable as a table of information about Fibre Channel switches that are managed by Fibre Channel management instances. Each Fibre Channel management instance can manage one or more Fibre Channel switches. The Switch Index, fcmSwitchIndex, is IMPORTed from the FC-MGMT-MIB as the index value to uniquely identify a Fibre Channel switch amongst those (one or more) managed by the same Fibre Channel management instance.
FC-MGMT-MIB[RFC4044]将fcmSwitchTable定义为有关由光纤通道管理实例管理的光纤通道交换机的信息表。每个光纤通道管理实例都可以管理一个或多个光纤通道交换机。交换机索引fcmSwitchIndex作为索引值从FC-MGMT-MIB导入，以便在由同一光纤通道管理实例管理的那些（一个或多个）交换机中唯一标识光纤通道交换机。
With multiple Fabrics, each Fabric has its own instances of the Fabric-related management instrumentation. Thus, this MIB defines all Fabric-related information in tables that are INDEXed by an arbitrary integer, named a "Fabric Index". The syntax of a Fabric Index is T11FabricIndex, imported from T11-TC-MIB [RFC4439]. When a device is connected to a single physical Fabric, without use of any virtual Fabrics, the value of this Fabric Index will always be 1. In an environment of multiple virtual and/or physical Fabrics, this index provides a means to distinguish one Fabric from another.
对于多个结构，每个结构都有其自己的与结构相关的管理工具实例。因此，此MIB定义了表中所有与结构相关的信息，这些信息由一个任意整数（称为“结构索引”）索引。结构索引的语法为T11FabricIndex，从T11-TC-MIB[RFC4439]导入。当设备连接到单个物理结构而不使用任何虚拟结构时，此结构索引的值将始终为1。在包含多个虚拟和/或物理结构的环境中，此索引提供了一种将一个结构与另一个结构区分开来的方法。
It is quite possible, and may even be likely, that a Fibre Channel switch will have ports connected to multiple virtual and/or physical Fabrics. Thus, in order to simplify a management protocol query concerning all the Fabrics to which a single switch is connected, fcmSwitchIndex will be listed before t11FcsFabricIndex when they both appear in the same INDEX clause.
光纤通道交换机很可能（甚至可能）将端口连接到多个虚拟和/或物理结构。因此，为了简化有关单个交换机连接到的所有结构的管理协议查询，当fcmSwitchIndex和T11FCSFfabriIndex出现在同一个INDEX子句中时，它们将列在T11FCSFfabriIndex之前。
This section describes the six MIB groups contained in the MIB module.
本节介绍MIB模块中包含的六个MIB组。
This group contains the Fabric configuration information discovered by Fabric Configuration Servers.
此组包含结构配置服务器发现的结构配置信息。
This group contains objects by which to monitor the status of discovery of Fabric configurations by Fabric Configuration Servers.
此组包含用于监视结构配置服务器发现结构配置的状态的对象。
This group contains objects for requesting a Fabric Configuration Server to discover the configuration of one or more Fabrics.
此组包含用于请求结构配置服务器发现一个或多个结构配置的对象。
This group contains objects for Fabric Configuration Server statistics information.
此组包含结构配置服务器统计信息的对象。
This group contains three notifications, generated when an FCS:
该组包含三个通知，当FCS：
- rejects a registration, deregistration, or query request; - completes discovery on a range of Fabrics; - learns that a management address of an Interconnect Element has changed.
- 拒绝注册、注销或查询请求；-在一系列结构上完成发现；-了解互连元件的管理地址已更改。
When defining SNMP notifications for events that occur in the data-plane, the maximum frequency of their generation needs to be considered. Unless there is some limiting factor, such notifications need to be flow-controlled in some way, e.g., defined such that after some maximum number within a specified time interval have occurred, further notifications are suppressed for some subsequent time interval. However, as and when such a suppression occurs, the Network Management System (NMS) that didn't receive the notifications (because they were suppressed) needs to be able to obtain an indication of how many were suppressed. Therefore, an additional Counter32 object needs to be defined, and/or a new type of notification needs to be defined for use at the end of the interval.
为数据平面中发生的事件定义SNMP通知时，需要考虑其生成的最大频率。除非存在某些限制因素，否则此类通知需要以某种方式进行流量控制，例如，定义为在指定时间间隔内出现某个最大数量后，在随后的某个时间间隔内抑制进一步的通知。但是，当发生这种抑制时，没有收到通知（因为它们被抑制）的网络管理系统（NMS）需要能够获得多少被抑制的指示。因此，需要定义一个额外的Counter32对象，和/或需要定义一种新类型的通知，以便在间隔结束时使用。
While this is extra complexity, it is necessary for notifications that need to be flow-controlled.
虽然这是额外的复杂性，但对于需要流控制的通知来说是必要的。
In contrast, for notifications such as all the ones defined in this MIB module, which are generated due to control-plane events (and are not able to start a chain reaction):
相反，对于诸如此MIB模块中定义的所有通知，这些通知是由于控制平面事件（并且无法启动连锁反应）而生成的：
- estimating the maximum number that could possibly be generated per unit time for each type of notification is too simplistic. For example, it's unreasonable to ask how many of the t11FcsDiscoveryCompleteNotify notifications can be generated in a time interval, because it depends on several factors: how big is the network? how many Virtual Fabrics need to be discovered? how quickly can the operator ask for another discovery after the last one completes?
- 估计每种类型的通知在单位时间内可能生成的最大数量过于简单。例如，询问在一个时间间隔内可以生成多少T11FCDiscoveryCompleteNotify通知是不合理的，因为这取决于几个因素：网络有多大？需要发现多少虚拟结构？在最后一个发现完成后，操作员可以多快要求另一个发现？
- the extra complexity of flow-controlling these types of notifications is not warranted.
- 不保证流控制这些类型通知的额外复杂性。
This group contains notification control and notification information objects for monitoring Fabric Configuration Server request rejection and discovery of topology information.
此组包含用于监视结构配置服务器请求拒绝和拓扑信息发现的通知控制和通知信息对象。
A "Platform" is defined in FC-GS-5 to be not only a set of zero or more FC nodes, but also a set of zero or more "OS LUN Map Entries" (see Figure 8 in [FC-GS-5]). Information on "OS LUN Map Entries" is not included in this T11-FC-FABRIC-CONFIG-SERVER-MIB. Instead, information on LUN Maps can be obtained via the scsiLunMapGroup object group defined in the SCSI-MIB [RFC4455].
FC-GS-5中定义的“平台”不仅是一组零个或多个FC节点，而且是一组零个或多个“OS LUN映射项”（请参见[FC-GS-5]中的图8]）。此T11-FC-FABRIC-CONFIG-SERVER-MIB中不包括有关“OS LUN映射条目”的信息。相反，有关LUN映射的信息可以通过SCSI-MIB[RFC4455]中定义的scsiLunMapGroup对象组获得。
T11-FC-FABRIC-CONFIG-SERVER-MIB DEFINITIONS ::= BEGIN
T11-FC-FABRIC-CONFIG-SERVER-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
NOTIFICATION-TYPE, mib-2, Counter32, Unsigned32
FROM SNMPv2-SMI -- [RFC2578]
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF -- [RFC2580]
TEXTUAL-CONVENTION, TruthValue, TimeStamp
FROM SNMPv2-TC -- [RFC2579]
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
URLString
FROM NETWORK-SERVICES-MIB -- [RFC2788]
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
NOTIFICATION-TYPE, mib-2, Counter32, Unsigned32
FROM SNMPv2-SMI -- [RFC2578]
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF -- [RFC2580]
TEXTUAL-CONVENTION, TruthValue, TimeStamp
FROM SNMPv2-TC -- [RFC2579]
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
URLString
FROM NETWORK-SERVICES-MIB -- [RFC2788]
FcPortType, FcNameIdOrZero, FcDomainIdOrZero,
fcmInstanceIndex, fcmSwitchIndex, FcAddressIdOrZero
FROM FC-MGMT-MIB -- [RFC4044]
T11NsGs4RejectReasonCode
FROM T11-FC-NAME-SERVER-MIB -- [RFC4438]
T11FabricIndex
FROM T11-TC-MIB -- [RFC4439]
t11FamLocalSwitchWwn
FROM T11-FC-FABRIC-ADDR-MGR-MIB; -- [RFC4439]
FcPortType, FcNameIdOrZero, FcDomainIdOrZero,
fcmInstanceIndex, fcmSwitchIndex, FcAddressIdOrZero
FROM FC-MGMT-MIB -- [RFC4044]
T11NsGs4RejectReasonCode
FROM T11-FC-NAME-SERVER-MIB -- [RFC4438]
T11FabricIndex
FROM T11-TC-MIB -- [RFC4439]
t11FamLocalSwitchWwn
FROM T11-FC-FABRIC-ADDR-MGR-MIB; -- [RFC4439]
t11FcFabricConfigServerMIB MODULE-IDENTITY LAST-UPDATED "200706270000Z" ORGANIZATION "For the initial versions, T11. For later versions, the IETF's IMSS Working Group." CONTACT-INFO " Claudio DeSanti Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA EMail: cds@cisco.com
t11FcFabricConfigServerMIB MODULE-IDENTITY最新更新的“200706270000Z”组织，用于初始版本，T11。对于更高版本，IETF的IMSS工作组。“联系信息”Claudio DeSanti Cisco Systems，Inc.170 West Tasman Drive San Jose，CA 95134 USA电子邮件：cds@cisco.com
Keith McCloghrie Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA EMail: kzm@cisco.com" DESCRIPTION "The MIB module for the management of a Fabric Configuration Server (FCS) in a Fibre Channel (FC) network. An FCS is defined by the FC-GS-5 standard. This
Keith McCloghrie Cisco Systems，Inc.美国加利福尼亚州圣何塞市西塔斯曼大道170号邮编：95134电子邮件：kzm@cisco.com“描述”用于管理光纤通道（FC）网络中的结构配置服务器（FCS）的MIB模块。FCS由FC-GS-5标准定义。这
MIB provides the capabilities to trigger a discovery of the configuration of one or more Fabrics, to retrieve the results of such a discovery, as well as to control and monitor the operation of an FCS. The discovered configuration contains information about:
MIB提供触发一个或多个结构配置发现、检索此类发现结果以及控制和监控FCS运行的能力。发现的配置包含以下信息：
- Interconnect Elements (IEs), i.e., switches, hubs, bridges, etc., - Ports on IEs, and - Platforms that consist of one or more FC nodes.
- 互连元件（IE），即交换机、集线器、网桥等——IE上的端口，以及——由一个或多个FC节点组成的平台。
Copyright (C) The IETF Trust (2007). This version of
this MIB module is part of RFC 4935; see the RFC itself for
full legal notices."
REVISION "200706270000Z"
DESCRIPTION
"Initial version of this MIB module, published as RFC 4935."
::= { mib-2 162 }
Copyright (C) The IETF Trust (2007). This version of
this MIB module is part of RFC 4935; see the RFC itself for
full legal notices."
REVISION "200706270000Z"
DESCRIPTION
"Initial version of this MIB module, published as RFC 4935."
::= { mib-2 162 }
t11FcsMIBObjects OBJECT IDENTIFIER
::= { t11FcFabricConfigServerMIB 1 }
t11FcsMIBConformance OBJECT IDENTIFIER
::= { t11FcFabricConfigServerMIB 2 }
t11FcsNotifications OBJECT IDENTIFIER
::= { t11FcFabricConfigServerMIB 0 }
t11FcsMIBObjects OBJECT IDENTIFIER
::= { t11FcFabricConfigServerMIB 1 }
t11FcsMIBConformance OBJECT IDENTIFIER
::= { t11FcFabricConfigServerMIB 2 }
t11FcsNotifications OBJECT IDENTIFIER
::= { t11FcFabricConfigServerMIB 0 }
t11FcsDiscovery OBJECT IDENTIFIER ::= { t11FcsMIBObjects 1 }
t11FcsDiscoveredConfig OBJECT IDENTIFIER ::= { t11FcsMIBObjects 2 }
t11FcsStats OBJECT IDENTIFIER ::= { t11FcsMIBObjects 3 }
t11FcsNotificationInfo OBJECT IDENTIFIER ::= { t11FcsMIBObjects 4 }
t11FcsDiscovery OBJECT IDENTIFIER ::= { t11FcsMIBObjects 1 }
t11FcsDiscoveredConfig OBJECT IDENTIFIER ::= { t11FcsMIBObjects 2 }
t11FcsStats OBJECT IDENTIFIER ::= { t11FcsMIBObjects 3 }
t11FcsNotificationInfo OBJECT IDENTIFIER ::= { t11FcsMIBObjects 4 }
-- -- Textual Conventions --
----文本约定--
T11FcListIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An index that identifies a list of elements.
All elements that belong to the same list have the
same index value. This syntax is used for objects
which identify a list in the INDEX clause of a table
of elements of that type of list."
SYNTAX Unsigned32 (1..4294967295)
T11FcListIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An index that identifies a list of elements.
All elements that belong to the same list have the
same index value. This syntax is used for objects
which identify a list in the INDEX clause of a table
of elements of that type of list."
SYNTAX Unsigned32 (1..4294967295)
T11FcListIndexPointerOrZero ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
T11FcListIndexPointerOrZero ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current DESCRIPTION "Objects with this syntax point to a list of elements contained in a table, by holding the same value as the object with syntax T11FcListIndex defined in the table's INDEX clause, or, zero to indicate an empty list. Note that such a table could have one row per list, or it could have one row per element of a list.
STATUS current DESCRIPTION“具有此语法的对象指向表中包含的元素列表，方法是将其值与表的INDEX子句中定义的语法为T11FcListIndex的对象保持相同，或将其设置为零以表示空列表。请注意，这样的表可以每个列表有一行，也可以每个列表元素有一行。
The definition of an object with this syntax must identify the table(s) into which it points." SYNTAX Unsigned32 -- the default range of (0..4294967295)
具有此语法的对象的定义必须标识其指向的表。“syntax Unsigned32--默认范围（0..4294967295）
T11FcIeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The type of Interconnect Element (IE):
T11FcIeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The type of Interconnect Element (IE):
unknown(1) - an unknown IE.
other(2) - some other type of IE.
switch(3) - the IE is a switch.
hub(4) - the IE is a hub.
bridge(5) - the IE is a bridge."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, Table 96."
SYNTAX INTEGER {
unknown(1),
other(2),
switch(3),
hub(4),
bridge(5)
}
unknown(1) - an unknown IE.
other(2) - some other type of IE.
switch(3) - the IE is a switch.
hub(4) - the IE is a hub.
bridge(5) - the IE is a bridge."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, Table 96."
SYNTAX INTEGER {
unknown(1),
other(2),
switch(3),
hub(4),
bridge(5)
}
T11FcPortState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The state of a port:
T11FcPortState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The state of a port:
unknown(1) - unknown state.
other(2) - some other state.
online(3) - port is in online state.
offline(4) - port is in offline state.
testing(5) - port is in testing state.
fault(6) - port is faulty."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, Table 106."
unknown(1) - unknown state.
other(2) - some other state.
online(3) - port is in online state.
offline(4) - port is in offline state.
testing(5) - port is in testing state.
fault(6) - port is faulty."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, Table 106."
SYNTAX INTEGER {
unknown(1),
other(2),
online(3),
offline(4),
testing(5),
fault(6)
}
SYNTAX INTEGER {
unknown(1),
other(2),
online(3),
offline(4),
testing(5),
fault(6)
}
T11FcPortTxType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The technology of the port transceiver:
T11FcPortTxType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The technology of the port transceiver:
unknown(1) - unknown (includes the 'null' type)
other(2) - some other technology
shortwave850nm(3) - Short wave laser - SN (850 nm)
longwave1550nm(4) - Long wave laser - LL (1550 nm)
longwave1310nm(5) - Long wave laser cost
reduced - LC (1310 nm)
electrical(6) - Electrical - EL.
tenGbaseSr850(7) - 10GBASE-SR 850nm laser
tenGbaseLr1310(8) - 10GBASE-LR 1310nm laser
tenGbaseEr1550(9) - 10GBASE-ER 1550nm laser
tenGbaseLx1300(10) - 10GBASE-LX4 WWDM 1300nm laser
tenGbaseSw850(11) - 10GBASE-SW 850nm laser
tenGbaseLw1310(12) - 10GBASE-LW 1310nm laser
tenGbaseEw1550(13) - 10GBASE-EW 1550nm laser
"
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, Table 101."
SYNTAX INTEGER {
unknown(1),
other(2),
shortwave850nm(3),
longwave1550nm(4),
longwave1310nm(5),
electrical(6),
tenGbaseSr850(7),
tenGbaseLr1310(8),
tenGbaseEr1550(9),
tenGbaseLx1300(10),
tenGbaseSw850(11),
tenGbaseLw1310(12),
tenGbaseEw1550(13)
}
unknown(1) - unknown (includes the 'null' type)
other(2) - some other technology
shortwave850nm(3) - Short wave laser - SN (850 nm)
longwave1550nm(4) - Long wave laser - LL (1550 nm)
longwave1310nm(5) - Long wave laser cost
reduced - LC (1310 nm)
electrical(6) - Electrical - EL.
tenGbaseSr850(7) - 10GBASE-SR 850nm laser
tenGbaseLr1310(8) - 10GBASE-LR 1310nm laser
tenGbaseEr1550(9) - 10GBASE-ER 1550nm laser
tenGbaseLx1300(10) - 10GBASE-LX4 WWDM 1300nm laser
tenGbaseSw850(11) - 10GBASE-SW 850nm laser
tenGbaseLw1310(12) - 10GBASE-LW 1310nm laser
tenGbaseEw1550(13) - 10GBASE-EW 1550nm laser
"
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, Table 101."
SYNTAX INTEGER {
unknown(1),
other(2),
shortwave850nm(3),
longwave1550nm(4),
longwave1310nm(5),
electrical(6),
tenGbaseSr850(7),
tenGbaseLr1310(8),
tenGbaseEr1550(9),
tenGbaseLx1300(10),
tenGbaseSw850(11),
tenGbaseLw1310(12),
tenGbaseEw1550(13)
}
T11FcsRejectReasonExplanation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The reject reason code explanation:
T11FcsRejectReasonExplanation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The reject reason code explanation:
noAdditionalExplanation(1) - no additional explanation. invNameIdForIEOrPort(2) - the format of IE or port name is invalid. ieListNotAvailable(3) - IE list is not available. ieTypeNotAvailable(4) - IE type is not available. domainIdNotAvailable(5) - Domain ID is not available. mgmtIdNotAvailable(6) - mgmt ID is not available. fabNameNotAvailable(7) - Fabric_Name is not available. ielogNameNotAvailable(8) - IE logical name is not available. mgmtAddrListNotAvailable(9) - mgmt address list is not available. ieInfoListNotAvailable(10) - IE info list is not available. portListNotAvailable(11) - port list is not available. portTypeNotAvailable(12) - port type is not available. phyPortNumNotAvailable(13) - physical port number is not available. attPortNameListNotAvailable(14) - attached port name list is not available. portStateNotAvailable(15) - port state is not available. unableToRegIELogName(16) - not able to register IE logical name. platformNameNoExist(17) - platform name does not exist. platformNameAlreadyExists(18) - platform name already exists. platformNodeNameNoExists(19) - platform node name does not exist. platformNodeNameAlreadyExists(20) - platform node name already exists. resourceUnavailable(21) - resource unavailable. noEntriesInLunMap(22)
无附加说明（1）-无附加说明。InvnameIDForeiForPort（2）-IE或端口名的格式无效。ieListNotAvailable（3）-IE列表不可用。ieTypeNotAvailable（4）-IE类型不可用。domainIdNotAvailable（5）-域ID不可用。MGMTID不可用（6）-管理ID不可用。fabNameNotAvailable（7）-结构名称不可用。ielogNameNotAvailable（8）-IE逻辑名称不可用。管理地址列表不可用（9）-管理地址列表不可用。ieInfoListNotAvailable（10）-IE信息列表不可用。portListNotAvailable（11）-端口列表不可用。portTypeNotAvailable（12）-端口类型不可用。phyPortNumNotAvailable（13）-物理端口号不可用。attPortNameListNotAvailable（14）-附加的端口名称列表不可用。portStateNotAvailable（15）-端口状态不可用。无法注册IE逻辑名（16）-无法注册IE逻辑名。platformNameNoExist（17）-平台名称不存在。platformNameAlreadyExists（18）-平台名称已存在。PlatformNodeNameExists（19）-平台节点名称不存在。platformNodeNameAlreadyExists（20）-平台节点名称已存在。resourceUnavailable（21）-资源不可用。NoEntriesinlump（22）
- zero entries in OS LUN Map.
invalidDeviceNameLength(23)
- invalid OS device name length.
multipleAttributes(24)
- multiple attributes of same type in
platform attribute block.
invalidAttribBlockLength(25)
- invalid platform attribute block length.
attributesMissing(26)
- required platform attributes not present."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, Table 124."
SYNTAX INTEGER {
noAdditionalExplanation(1),
invNameIdForIEOrPort(2),
ieListNotAvailable(3),
ieTypeNotAvailable(4),
domainIdNotAvailable(5),
mgmtIdNotAvailable(6),
fabNameNotAvailable(7),
ielogNameNotAvailable(8),
mgmtAddrListNotAvailable(9),
ieInfoListNotAvailable(10),
portListNotAvailable(11),
portTypeNotAvailable(12),
phyPortNumNotAvailable(13),
attPortNameListNotAvailable(14),
portStateNotAvailable(15),
unableToRegIELogName(16),
platformNameNoExist(17),
platformNameAlreadyExists(18),
platformNodeNameNoExists(19),
platformNodeNameAlreadyExists(20),
resourceUnavailable(21),
noEntriesInLunMap(22),
invalidDeviceNameLength(23),
multipleAttributes(24),
invalidAttribBlockLength(25),
attributesMissing(26)
}
- zero entries in OS LUN Map.
invalidDeviceNameLength(23)
- invalid OS device name length.
multipleAttributes(24)
- multiple attributes of same type in
platform attribute block.
invalidAttribBlockLength(25)
- invalid platform attribute block length.
attributesMissing(26)
- required platform attributes not present."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, Table 124."
SYNTAX INTEGER {
noAdditionalExplanation(1),
invNameIdForIEOrPort(2),
ieListNotAvailable(3),
ieTypeNotAvailable(4),
domainIdNotAvailable(5),
mgmtIdNotAvailable(6),
fabNameNotAvailable(7),
ielogNameNotAvailable(8),
mgmtAddrListNotAvailable(9),
ieInfoListNotAvailable(10),
portListNotAvailable(11),
portTypeNotAvailable(12),
phyPortNumNotAvailable(13),
attPortNameListNotAvailable(14),
portStateNotAvailable(15),
unableToRegIELogName(16),
platformNameNoExist(17),
platformNameAlreadyExists(18),
platformNodeNameNoExists(19),
platformNodeNameAlreadyExists(20),
resourceUnavailable(21),
noEntriesInLunMap(22),
invalidDeviceNameLength(23),
multipleAttributes(24),
invalidAttribBlockLength(25),
attributesMissing(26)
}
-- -- Objects for Fabric Discovery --
----用于结构发现的对象--
t11FcsFabricDiscoveryTable OBJECT-TYPE SYNTAX SEQUENCE OF T11FcsFabricDiscoveryEntry
T11FcsFabricDiscoveryEntry的t11FcsFabricDiscoveryTable对象类型语法序列
MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains control information for discovery of Fabric configuration by switches.
MAX-ACCESS not ACCESS STATUS current DESCRIPTION“此表包含交换机发现结构配置的控制信息。
Values written to objects in this table are not
retained over agent reboots."
::= { t11FcsDiscovery 1 }
Values written to objects in this table are not
retained over agent reboots."
::= { t11FcsDiscovery 1 }
t11FcsFabricDiscoveryEntry OBJECT-TYPE
SYNTAX T11FcsFabricDiscoveryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Control information for discovery by the switch
identified by fcmInstanceIndex and fcmSwitchIndex."
INDEX { fcmInstanceIndex, fcmSwitchIndex }
::= { t11FcsFabricDiscoveryTable 1 }
t11FcsFabricDiscoveryEntry OBJECT-TYPE
SYNTAX T11FcsFabricDiscoveryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Control information for discovery by the switch
identified by fcmInstanceIndex and fcmSwitchIndex."
INDEX { fcmInstanceIndex, fcmSwitchIndex }
::= { t11FcsFabricDiscoveryTable 1 }
T11FcsFabricDiscoveryEntry ::= SEQUENCE {
t11FcsFabricDiscoveryRangeLow T11FabricIndex,
t11FcsFabricDiscoveryRangeHigh T11FabricIndex,
t11FcsFabricDiscoveryStart INTEGER,
t11FcsFabricDiscoveryTimeOut Unsigned32
}
T11FcsFabricDiscoveryEntry ::= SEQUENCE {
t11FcsFabricDiscoveryRangeLow T11FabricIndex,
t11FcsFabricDiscoveryRangeHigh T11FabricIndex,
t11FcsFabricDiscoveryStart INTEGER,
t11FcsFabricDiscoveryTimeOut Unsigned32
}
t11FcsFabricDiscoveryRangeLow OBJECT-TYPE
SYNTAX T11FabricIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The discovery by a particular switch operates
within all existing Fabrics that have a Fabric
Index within a specific inclusive range. This
object specifies the minimum Fabric Index value
within that range. This value just represents
the lower end of the range and does not necessarily
represent any existing Fabric."
::= { t11FcsFabricDiscoveryEntry 1 }
t11FcsFabricDiscoveryRangeLow OBJECT-TYPE
SYNTAX T11FabricIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The discovery by a particular switch operates
within all existing Fabrics that have a Fabric
Index within a specific inclusive range. This
object specifies the minimum Fabric Index value
within that range. This value just represents
the lower end of the range and does not necessarily
represent any existing Fabric."
::= { t11FcsFabricDiscoveryEntry 1 }
t11FcsFabricDiscoveryRangeHigh OBJECT-TYPE SYNTAX T11FabricIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The discovery by a particular switch operates within all existing Fabrics that have a Fabric
t11FcsFabricDiscoveryRangeHigh对象类型语法T11FabricIndex MAX-ACCESS读写状态当前描述“特定交换机的发现在具有结构的所有现有结构中运行
Index within a specific inclusive range. This
object specifies the maximum Fabric Index value
within that range. This value just represents the
higher end of the range and does not necessarily
represent any existing Fabric."
::= { t11FcsFabricDiscoveryEntry 2 }
Index within a specific inclusive range. This
object specifies the maximum Fabric Index value
within that range. This value just represents the
higher end of the range and does not necessarily
represent any existing Fabric."
::= { t11FcsFabricDiscoveryEntry 2 }
t11FcsFabricDiscoveryStart OBJECT-TYPE
SYNTAX INTEGER {
start(1),
noOp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object provides the capability to trigger the start
of a discovery by a Fabric Configuration Server. If this
object is set to 'start', then the discovery is started on
those Fabrics that have their Fabric Index value in the
range specified by t11FcsFabricDiscoveryRangeLow and
t11FcsFabricDiscoveryRangeHigh. It is recommended that
whenever an instance of this object is set to 'start',
that the desired range be specified at the same time by
setting the corresponding instances of
t11FcsFabricDiscoveryRangeLow and
t11FcsFabricDiscoveryRangeHigh.
t11FcsFabricDiscoveryStart OBJECT-TYPE
SYNTAX INTEGER {
start(1),
noOp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object provides the capability to trigger the start
of a discovery by a Fabric Configuration Server. If this
object is set to 'start', then the discovery is started on
those Fabrics that have their Fabric Index value in the
range specified by t11FcsFabricDiscoveryRangeLow and
t11FcsFabricDiscoveryRangeHigh. It is recommended that
whenever an instance of this object is set to 'start',
that the desired range be specified at the same time by
setting the corresponding instances of
t11FcsFabricDiscoveryRangeLow and
t11FcsFabricDiscoveryRangeHigh.
Setting this object to 'start' will be rejected if a discovery is already/still in progress on any Fabrics in the specified range.
如果在指定范围内的任何结构上已经/仍在进行查找，则将此对象设置为“开始”将被拒绝。
No action is taken if this object is set to 'noOp'.
The value of this object when read is always 'noOp'."
::= { t11FcsFabricDiscoveryEntry 3 }
No action is taken if this object is set to 'noOp'.
The value of this object when read is always 'noOp'."
::= { t11FcsFabricDiscoveryEntry 3 }
t11FcsFabricDiscoveryTimeOut OBJECT-TYPE
SYNTAX Unsigned32 (300..86400)
UNITS "Seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum interval of time for which the discovered
Fabric information is cached by a Fabric Configuration
Server."
DEFVAL { 900 }
::= { t11FcsFabricDiscoveryEntry 4 }
t11FcsFabricDiscoveryTimeOut OBJECT-TYPE
SYNTAX Unsigned32 (300..86400)
UNITS "Seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum interval of time for which the discovered
Fabric information is cached by a Fabric Configuration
Server."
DEFVAL { 900 }
::= { t11FcsFabricDiscoveryEntry 4 }
--
--
-- Discovery State table --
--发现状态表--
t11FcsDiscoveryStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcsDiscoveryStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the status of discovery of
locally known Fabrics."
::= { t11FcsDiscovery 2 }
t11FcsDiscoveryStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcsDiscoveryStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the status of discovery of
locally known Fabrics."
::= { t11FcsDiscovery 2 }
t11FcsDiscoveryStateEntry OBJECT-TYPE
SYNTAX T11FcsDiscoveryStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The discovery status for a particular Fabric on the
switch identified by fcmInstanceIndex and fcmSwitchIndex."
INDEX { fcmInstanceIndex, fcmSwitchIndex, t11FcsFabricIndex }
::= { t11FcsDiscoveryStateTable 1 }
t11FcsDiscoveryStateEntry OBJECT-TYPE
SYNTAX T11FcsDiscoveryStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The discovery status for a particular Fabric on the
switch identified by fcmInstanceIndex and fcmSwitchIndex."
INDEX { fcmInstanceIndex, fcmSwitchIndex, t11FcsFabricIndex }
::= { t11FcsDiscoveryStateTable 1 }
T11FcsDiscoveryStateEntry ::= SEQUENCE {
t11FcsFabricIndex T11FabricIndex,
t11FcsDiscoveryStatus INTEGER,
t11FcsDiscoveryCompleteTime TimeStamp
}
T11FcsDiscoveryStateEntry ::= SEQUENCE {
t11FcsFabricIndex T11FabricIndex,
t11FcsDiscoveryStatus INTEGER,
t11FcsDiscoveryCompleteTime TimeStamp
}
t11FcsFabricIndex OBJECT-TYPE SYNTAX T11FabricIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique index value that uniquely identifies a particular Fabric.
t11FcsFabricIndex对象类型语法T11FabricIndex MAX-ACCESS不可访问状态当前描述“唯一标识特定结构的唯一索引值。
In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics can operate within one (or more) physical infrastructures, and this index value is used to uniquely identify a particular (physical or virtual) Fabric within a physical infrastructure.
在符合FC-SW-4的结构中，多个虚拟结构可以在一个（或多个）物理基础设施内运行，此索引值用于唯一标识物理基础设施内的特定（物理或虚拟）结构。
In a Fabric conformant to versions earlier than FC-SW-4,
only a single Fabric could operate within a physical
infrastructure, and thus, the value of this Fabric Index
was defined to always be 1."
::= { t11FcsDiscoveryStateEntry 1 }
In a Fabric conformant to versions earlier than FC-SW-4,
only a single Fabric could operate within a physical
infrastructure, and thus, the value of this Fabric Index
was defined to always be 1."
::= { t11FcsDiscoveryStateEntry 1 }
t11FcsDiscoveryStatus OBJECT-TYPE
SYNTAX INTEGER {
inProgress(1),
completed(2),
localOnly(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the discovery for the particular Fabric.
t11FcsDiscoveryStatus OBJECT-TYPE
SYNTAX INTEGER {
inProgress(1),
completed(2),
localOnly(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the discovery for the particular Fabric.
Initially when the switch comes up, all instances of this object have the value: 'localOnly', and the database contains only local information, i.e., no information discovered via the Fabric Configuration Server protocol specified in FC-GS-5.
最初，当交换机启动时，此对象的所有实例都具有值：“localOnly”，并且数据库仅包含本地信息，即，没有通过FC-GS-5中指定的结构配置服务器协议发现任何信息。
If t11FcsFabricDiscoveryStart is set to 'start' for a range of Fabrics that includes this Fabric, then the value of this object transitions to 'inProgress'. When the discovery completes, this object transitions to 'completed', and the data is cached for the minimum interval of time specified by t11FcsFabricDiscoveryTimeOut. After this interval has been exceeded, the data may be lost, in which case, the value of this object changes to 'localOnly'.
如果对于包含此结构的一系列结构，将t11FcsFabricDiscoveryStart设置为“开始”，则此对象的值将转换为“inProgress”。当发现完成时，此对象将转换为“已完成”，并在T11FCFabricDiscoveryTimeout指定的最小时间间隔内缓存数据。超过此间隔后，数据可能会丢失，在这种情况下，此对象的值将更改为“localOnly”。
This object cannot be set via SNMP to any value other
than 'localOnly'. If this object is set (via SNMP) to
'localOnly', the cached data for the Fabric is discarded
immediately, and if a discovery initiated from this
switch was in progress for this Fabric, then that
discovery is aborted."
::= { t11FcsDiscoveryStateEntry 2 }
This object cannot be set via SNMP to any value other
than 'localOnly'. If this object is set (via SNMP) to
'localOnly', the cached data for the Fabric is discarded
immediately, and if a discovery initiated from this
switch was in progress for this Fabric, then that
discovery is aborted."
::= { t11FcsDiscoveryStateEntry 2 }
t11FcsDiscoveryCompleteTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of sysUpTime at which
discovery was most recently completed or aborted on this
Fabric. This object contains the value of zero before
the first discovery on this Fabric."
::= { t11FcsDiscoveryStateEntry 3 }
t11FcsDiscoveryCompleteTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of sysUpTime at which
discovery was most recently completed or aborted on this
Fabric. This object contains the value of zero before
the first discovery on this Fabric."
::= { t11FcsDiscoveryStateEntry 3 }
-- -- The Database of Fabric Configuration Information
----结构配置信息数据库
-- -- Interconnect Element table --
----互连元件表--
t11FcsIeTable OBJECT-TYPE SYNTAX SEQUENCE OF T11FcsIeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Interconnect Elements. Interconnect Elements (IEs) are switches, hubs, bridges etc.
T11FCSientry MAX-ACCESS的t11FcsIeTable对象类型语法序列不可访问状态当前描述“互连元件表。互连元件包括交换机、集线器、网桥等。
By default, the Fabric Configuration Server will
maintain detailed information pertaining only to
local resources. As far as discovered topology is
concerned, only the IE name, type, and Domain ID
information will be maintained. If a discovery
cycle is triggered on a set of Fabrics, this table
along with the Port and Platform tables will be
populated with the discovered information. The
discovered data will be retained in this table for
at least t11FcsFabricDiscoveryTimeOut seconds after
the completion of its discovery or until the
discovered data is invalidated."
::= { t11FcsDiscoveredConfig 1 }
By default, the Fabric Configuration Server will
maintain detailed information pertaining only to
local resources. As far as discovered topology is
concerned, only the IE name, type, and Domain ID
information will be maintained. If a discovery
cycle is triggered on a set of Fabrics, this table
along with the Port and Platform tables will be
populated with the discovered information. The
discovered data will be retained in this table for
at least t11FcsFabricDiscoveryTimeOut seconds after
the completion of its discovery or until the
discovered data is invalidated."
::= { t11FcsDiscoveredConfig 1 }
t11FcsIeEntry OBJECT-TYPE
SYNTAX T11FcsIeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an Interconnect Element that was
discovered on a Fabric (identified by t11FcsFabricIndex),
by a switch (identified by fcmInstanceIndex and
fcmSwitchIndex)."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.2."
INDEX { fcmInstanceIndex, fcmSwitchIndex, t11FcsFabricIndex,
t11FcsIeName }
::= { t11FcsIeTable 1 }
t11FcsIeEntry OBJECT-TYPE
SYNTAX T11FcsIeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an Interconnect Element that was
discovered on a Fabric (identified by t11FcsFabricIndex),
by a switch (identified by fcmInstanceIndex and
fcmSwitchIndex)."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.2."
INDEX { fcmInstanceIndex, fcmSwitchIndex, t11FcsFabricIndex,
t11FcsIeName }
::= { t11FcsIeTable 1 }
T11FcsIeEntry ::= SEQUENCE {
t11FcsIeName FcNameIdOrZero,
t11FcsIeType T11FcIeType,
T11FcsIeEntry ::= SEQUENCE {
t11FcsIeName FcNameIdOrZero,
t11FcsIeType T11FcIeType,
t11FcsIeDomainId FcDomainIdOrZero, t11FcsIeMgmtId FcAddressIdOrZero, t11FcsIeFabricName FcNameIdOrZero, t11FcsIeLogicalName OCTET STRING, t11FcsIeMgmtAddrListIndex T11FcListIndexPointerOrZero, t11FcsIeInfoList OCTET STRING }
t11FcsIeDomainId FcDomainIdOrZero、t11FcsIeMgmtId FcAddressIdOrZero、T11FCSIEFARICNAME FcNameIdOrZero、t11FcsIeLogicalName八进制字符串、T11FCSIEMGMTADDRLISTIDE T11FcListIndexPointerOrZero、T11FCSIEINFOILIST八进制字符串}
t11FcsIeName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE(8 | 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The WWN of an Interconnect Element. This object
uniquely identifies an Interconnect Element on a
Fabric. If the IE is a switch, then this object
is the Switch_Name (WWN) of the switch."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.2.1."
::= { t11FcsIeEntry 1 }
t11FcsIeName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE(8 | 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The WWN of an Interconnect Element. This object
uniquely identifies an Interconnect Element on a
Fabric. If the IE is a switch, then this object
is the Switch_Name (WWN) of the switch."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.2.1."
::= { t11FcsIeEntry 1 }
t11FcsIeType OBJECT-TYPE
SYNTAX T11FcIeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of this Interconnect Element."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.2.2"
::= { t11FcsIeEntry 2 }
t11FcsIeType OBJECT-TYPE
SYNTAX T11FcIeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of this Interconnect Element."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.2.2"
::= { t11FcsIeEntry 2 }
t11FcsIeDomainId OBJECT-TYPE
SYNTAX FcDomainIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Domain ID of this Interconnect Element."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.2.3."
::= { t11FcsIeEntry 3 }
t11FcsIeDomainId OBJECT-TYPE
SYNTAX FcDomainIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Domain ID of this Interconnect Element."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.2.3."
::= { t11FcsIeEntry 3 }
t11FcsIeMgmtId OBJECT-TYPE SYNTAX FcAddressIdOrZero MAX-ACCESS read-only STATUS current
t11FcsIeMgmtId对象类型语法FcAddressIdOrZero最大访问只读状态当前
DESCRIPTION
"The management identifier of this Interconnect Element.
If the Interconnect Element is a switch, this object will
be the Domain Controller identifier of the switch. When
the value of the identifier is unknown, this object
contains the all-zeros value: x'00 00 00'."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.2.4."
DEFVAL { '000000'h }
::= { t11FcsIeEntry 4 }
DESCRIPTION
"The management identifier of this Interconnect Element.
If the Interconnect Element is a switch, this object will
be the Domain Controller identifier of the switch. When
the value of the identifier is unknown, this object
contains the all-zeros value: x'00 00 00'."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.2.4."
DEFVAL { '000000'h }
::= { t11FcsIeEntry 4 }
t11FcsIeFabricName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE(8 | 16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fabric_Name (WWN) of this Interconnect Element.
When the Fabric_Name is unknown, this object contains
the all-zeros value: x'00 00 00 00 00 00 00 00'."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.2.5."
DEFVAL { '0000000000000000'h }
::= { t11FcsIeEntry 5 }
t11FcsIeFabricName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE(8 | 16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fabric_Name (WWN) of this Interconnect Element.
When the Fabric_Name is unknown, this object contains
the all-zeros value: x'00 00 00 00 00 00 00 00'."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.2.5."
DEFVAL { '0000000000000000'h }
::= { t11FcsIeEntry 5 }
t11FcsIeLogicalName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The logical name of this Interconnect Element.
When the logical name is unknown, this object contains
the zero-length string."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.2.6."
::= { t11FcsIeEntry 6 }
t11FcsIeLogicalName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The logical name of this Interconnect Element.
When the logical name is unknown, this object contains
the zero-length string."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.2.6."
::= { t11FcsIeEntry 6 }
t11FcsIeMgmtAddrListIndex OBJECT-TYPE SYNTAX T11FcListIndexPointerOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The management address list for this Interconnect Element. This object points to an entry in the t11FcsMgmtAddrListTable." REFERENCE
t11FcsIeMgmtAddrListIndex对象类型语法T11FcListIndexPointerOrZero MAX-ACCESS只读状态当前描述“此互连元素的管理地址列表。此对象指向T11FCSMGMTADDRListable中的一个条目。”参考
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.2.7."
::= { t11FcsIeEntry 7 }
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.2.7."
::= { t11FcsIeEntry 7 }
t11FcsIeInfoList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..252)) MAX-ACCESS read-only STATUS current DESCRIPTION "The information list for this Interconnect Element.
t11FcsIeInfoList对象类型语法八位字节字符串（大小（0..252））MAX-ACCESS只读状态当前描述“此互连元素的信息列表。
The value of this object is formatted as specified in
FC-GS-5, i.e., it has the following substrings in order:
vendor name, model name/number, and release code/level,
followed by zero or more substrings of vendor-specific
information. Each substring is terminated with a byte
containing a null value (x'00')."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.2.8"
::= { t11FcsIeEntry 8 }
The value of this object is formatted as specified in
FC-GS-5, i.e., it has the following substrings in order:
vendor name, model name/number, and release code/level,
followed by zero or more substrings of vendor-specific
information. Each substring is terminated with a byte
containing a null value (x'00')."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.2.8"
::= { t11FcsIeEntry 8 }
-- -- Management Address List table --
----管理地址列表表--
t11FcsMgmtAddrListTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcsMgmtAddrListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the set of management address lists
that are currently referenced by any instance of the
t11FcsIeMgmtAddrListIndex or
t11FcsPlatformMgmtAddrListIndex objects."
::= { t11FcsDiscoveredConfig 2 }
t11FcsMgmtAddrListTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcsMgmtAddrListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the set of management address lists
that are currently referenced by any instance of the
t11FcsIeMgmtAddrListIndex or
t11FcsPlatformMgmtAddrListIndex objects."
::= { t11FcsDiscoveredConfig 2 }
t11FcsMgmtAddrListEntry OBJECT-TYPE SYNTAX T11FcsMgmtAddrListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about one management address in a management address list, which is known to a switch (identified by fcmInstanceIndex and fcmSwitchIndex)." INDEX { fcmInstanceIndex, fcmSwitchIndex, t11FcsMgmtAddrListIndex, t11FcsMgmtAddrIndex }
T11FCSMGMATADDRLISTENTRY对象类型语法T11FCSMGMATADDRLISTENTRY MAX-ACCESS不可访问状态当前描述“关于管理地址列表中的一个管理地址的信息，交换机已知该地址（由FCMINSTANCINDEX和FCMSWITCINDEX标识）。”索引{fcmInstanceIndex，fcmSwitchIndex，t11FcsMgmtAddrListIndex，t11FcsMgmtAddrListIndex}
::= { t11FcsMgmtAddrListTable 1 }
::= { t11FcsMgmtAddrListTable 1 }
T11FcsMgmtAddrListEntry ::= SEQUENCE {
t11FcsMgmtAddrListIndex T11FcListIndex,
t11FcsMgmtAddrIndex Unsigned32,
t11FcsMgmtAddr URLString
}
T11FcsMgmtAddrListEntry ::= SEQUENCE {
t11FcsMgmtAddrListIndex T11FcListIndex,
t11FcsMgmtAddrIndex Unsigned32,
t11FcsMgmtAddr URLString
}
t11FcsMgmtAddrListIndex OBJECT-TYPE
SYNTAX T11FcListIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value of the management address list."
::= { t11FcsMgmtAddrListEntry 1 }
t11FcsMgmtAddrListIndex OBJECT-TYPE
SYNTAX T11FcListIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value of the management address list."
::= { t11FcsMgmtAddrListEntry 1 }
t11FcsMgmtAddrIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer value to distinguish different
management addresses in the same list."
::= { t11FcsMgmtAddrListEntry 2 }
t11FcsMgmtAddrIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer value to distinguish different
management addresses in the same list."
::= { t11FcsMgmtAddrListEntry 2 }
t11FcsMgmtAddr OBJECT-TYPE SYNTAX URLString MAX-ACCESS read-only STATUS current DESCRIPTION "The management address of this entry.
t11FcsMgmtAddr对象类型语法URLString MAX-ACCESS只读状态当前说明“此项的管理地址。
The format of this object is a Uniform Resource
Locator (URL), e.g., for SNMP, see RFC 4088."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.2.7"
::= { t11FcsMgmtAddrListEntry 3 }
The format of this object is a Uniform Resource
Locator (URL), e.g., for SNMP, see RFC 4088."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.2.7"
::= { t11FcsMgmtAddrListEntry 3 }
-- -- Ports --
----港口--
t11FcsPortTable OBJECT-TYPE SYNTAX SEQUENCE OF T11FcsPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION
T11FCSortEntry MAX-ACCESS的T11FCSortTable对象类型语法序列不可访问状态当前描述
"This table contains information about the ports of IEs."
::= { t11FcsDiscoveredConfig 4 }
"This table contains information about the ports of IEs."
::= { t11FcsDiscoveredConfig 4 }
t11FcsPortEntry OBJECT-TYPE
SYNTAX T11FcsPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port of an Interconnect
Element (identified by t11FcsIeName). The port is
connected to a Fabric (identified by t11FcsFabricIndex)
and known to a switch (identified by fcmInstanceIndex
and fcmSwitchIndex)."
INDEX { fcmInstanceIndex, fcmSwitchIndex, t11FcsFabricIndex,
t11FcsIeName, t11FcsPortName }
::= { t11FcsPortTable 1 }
t11FcsPortEntry OBJECT-TYPE
SYNTAX T11FcsPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port of an Interconnect
Element (identified by t11FcsIeName). The port is
connected to a Fabric (identified by t11FcsFabricIndex)
and known to a switch (identified by fcmInstanceIndex
and fcmSwitchIndex)."
INDEX { fcmInstanceIndex, fcmSwitchIndex, t11FcsFabricIndex,
t11FcsIeName, t11FcsPortName }
::= { t11FcsPortTable 1 }
T11FcsPortEntry ::= SEQUENCE {
t11FcsPortName FcNameIdOrZero,
t11FcsPortType FcPortType,
t11FcsPortTxType T11FcPortTxType,
t11FcsPortModuleType Unsigned32,
t11FcsPortPhyPortNum Unsigned32,
t11FcsPortAttachPortNameIndex T11FcListIndexPointerOrZero,
t11FcsPortState T11FcPortState,
t11FcsPortSpeedCapab OCTET STRING,
t11FcsPortOperSpeed OCTET STRING,
t11FcsPortZoningEnfStatus OCTET STRING
}
T11FcsPortEntry ::= SEQUENCE {
t11FcsPortName FcNameIdOrZero,
t11FcsPortType FcPortType,
t11FcsPortTxType T11FcPortTxType,
t11FcsPortModuleType Unsigned32,
t11FcsPortPhyPortNum Unsigned32,
t11FcsPortAttachPortNameIndex T11FcListIndexPointerOrZero,
t11FcsPortState T11FcPortState,
t11FcsPortSpeedCapab OCTET STRING,
t11FcsPortOperSpeed OCTET STRING,
t11FcsPortZoningEnfStatus OCTET STRING
}
t11FcsPortName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE(8 | 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port_Name (WWN) of the port for which this row
contains information."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.1."
::= { t11FcsPortEntry 1 }
t11FcsPortName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE(8 | 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port_Name (WWN) of the port for which this row
contains information."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.1."
::= { t11FcsPortEntry 1 }
t11FcsPortType OBJECT-TYPE SYNTAX FcPortType MAX-ACCESS read-only STATUS current DESCRIPTION "The Port Type of this port."
T11FCPortType对象类型语法FcPortType MAX-ACCESS只读状态当前描述“此端口的端口类型”
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.2."
::= { t11FcsPortEntry 2 }
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.2."
::= { t11FcsPortEntry 2 }
t11FcsPortTxType OBJECT-TYPE
SYNTAX T11FcPortTxType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port TX Type of this port."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.3."
::= { t11FcsPortEntry 3 }
t11FcsPortTxType OBJECT-TYPE
SYNTAX T11FcPortTxType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port TX Type of this port."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.3."
::= { t11FcsPortEntry 3 }
t11FcsPortModuleType OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port module type of this port."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.4."
::= { t11FcsPortEntry 4 }
t11FcsPortModuleType OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port module type of this port."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.4."
::= { t11FcsPortEntry 4 }
t11FcsPortPhyPortNum OBJECT-TYPE
SYNTAX Unsigned32 -- the default range of (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical number for this port. FC-GS-5 says that
the contents of this field, which are carried in a field
with a size of 4 bytes, are not to be restricted due to
vendor-specific methods for numbering physical ports."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.5."
::= { t11FcsPortEntry 5 }
t11FcsPortPhyPortNum OBJECT-TYPE
SYNTAX Unsigned32 -- the default range of (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical number for this port. FC-GS-5 says that
the contents of this field, which are carried in a field
with a size of 4 bytes, are not to be restricted due to
vendor-specific methods for numbering physical ports."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.5."
::= { t11FcsPortEntry 5 }
t11FcsPortAttachPortNameIndex OBJECT-TYPE SYNTAX T11FcListIndexPointerOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The attached port name list for this port. This object points to an entry in the t11FcsAttachPortNameListTable."
T11FCPortAttachPortNameIndex对象类型语法T11FCListIndexPointerZero MAX-ACCESS只读状态当前描述“此端口的附加端口名称列表。此对象指向T11FCAttachPortNameListTable中的一个条目。”
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.6."
::= { t11FcsPortEntry 6 }
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.6."
::= { t11FcsPortEntry 6 }
t11FcsPortState OBJECT-TYPE
SYNTAX T11FcPortState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of this port."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.7."
::= { t11FcsPortEntry 7 }
t11FcsPortState OBJECT-TYPE
SYNTAX T11FcPortState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of this port."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.7."
::= { t11FcsPortEntry 7 }
t11FcsPortSpeedCapab OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port speed capabilities of this port. The two octets
of the value are formatted as described in FC-GS-5."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.8."
::= { t11FcsPortEntry 8 }
t11FcsPortSpeedCapab OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port speed capabilities of this port. The two octets
of the value are formatted as described in FC-GS-5."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.8."
::= { t11FcsPortEntry 8 }
t11FcsPortOperSpeed OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operating speed of this port. The two octets
of the value are formatted as described in FC-GS-5."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.9."
::= { t11FcsPortEntry 9 }
t11FcsPortOperSpeed OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operating speed of this port. The two octets
of the value are formatted as described in FC-GS-5."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.9."
::= { t11FcsPortEntry 9 }
t11FcsPortZoningEnfStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (12)) MAX-ACCESS read-only STATUS current DESCRIPTION "The zoning enforcement status of this port. The 12 octets of the value are formatted as described in FC-GS-5." REFERENCE
T11FCPortZoningEFStatus对象类型语法八位字节字符串（大小（12））最大访问只读状态当前描述“此端口的分区强制状态。该值的12个八位字节的格式如FC-GS-5中所述。”参考
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.10."
::= { t11FcsPortEntry 10 }
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.10."
::= { t11FcsPortEntry 10 }
-- -- Attached Port List table --
----随附端口列表表--
t11FcsAttachPortNameListTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcsAttachPortNameListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all the lists of attach port
names."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.6"
::= { t11FcsDiscoveredConfig 5 }
t11FcsAttachPortNameListTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcsAttachPortNameListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all the lists of attach port
names."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.6"
::= { t11FcsDiscoveredConfig 5 }
t11FcsAttachPortNameListEntry OBJECT-TYPE
SYNTAX T11FcsAttachPortNameListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the name of a particular attached port,
which is known to a switch (identified by fcmInstanceIndex
and fcmSwitchIndex)."
INDEX { fcmInstanceIndex, fcmSwitchIndex,
t11FcsAttachPortNameListIndex, t11FcsAttachPortName }
::= { t11FcsAttachPortNameListTable 1 }
t11FcsAttachPortNameListEntry OBJECT-TYPE
SYNTAX T11FcsAttachPortNameListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the name of a particular attached port,
which is known to a switch (identified by fcmInstanceIndex
and fcmSwitchIndex)."
INDEX { fcmInstanceIndex, fcmSwitchIndex,
t11FcsAttachPortNameListIndex, t11FcsAttachPortName }
::= { t11FcsAttachPortNameListTable 1 }
T11FcsAttachPortNameListEntry ::= SEQUENCE {
t11FcsAttachPortNameListIndex T11FcListIndex,
t11FcsAttachPortName OCTET STRING
}
T11FcsAttachPortNameListEntry ::= SEQUENCE {
t11FcsAttachPortNameListIndex T11FcListIndex,
t11FcsAttachPortName OCTET STRING
}
t11FcsAttachPortNameListIndex OBJECT-TYPE
SYNTAX T11FcListIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value of the attach port name list."
::= { t11FcsAttachPortNameListEntry 1 }
t11FcsAttachPortNameListIndex OBJECT-TYPE
SYNTAX T11FcListIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value of the attach port name list."
::= { t11FcsAttachPortNameListEntry 1 }
t11FcsAttachPortName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (12)) MAX-ACCESS read-only
T11FCAttachPortName对象类型语法八位字符串（大小（12））MAX-ACCESS只读
STATUS current
DESCRIPTION
"The attached port name. Zero or more of these names
may be associated with a port object.
The first 8 bytes of this object contain the WWN of
the port followed by 2 reserved bytes. Following
this is one byte of Port flags and one byte of
Port type, as described in FC-GS-5."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.6"
::= { t11FcsAttachPortNameListEntry 2 }
STATUS current
DESCRIPTION
"The attached port name. Zero or more of these names
may be associated with a port object.
The first 8 bytes of this object contain the WWN of
the port followed by 2 reserved bytes. Following
this is one byte of Port flags and one byte of
Port type, as described in FC-GS-5."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.3.6"
::= { t11FcsAttachPortNameListEntry 2 }
-- -- Platforms --
----平台--
t11FcsPlatformTable OBJECT-TYPE SYNTAX SEQUENCE OF T11FcsPlatformEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on platforms.
T11FCPlatformTable T11FCPlatformEntry MAX-ACCESS不可访问状态的对象类型语法序列当前描述“此表包含平台信息。
By default, this table only contains local (e.g., for a
local switch) information. If a discovery is triggered,
this table will also contain information gathered by the
discovery process. The discovered information is retained
in this table for at least t11FcsFabricDiscoveryTimeOut
seconds after the completion of its discovery or until
the discovered cache is invalidated."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4"
::= { t11FcsDiscoveredConfig 6 }
By default, this table only contains local (e.g., for a
local switch) information. If a discovery is triggered,
this table will also contain information gathered by the
discovery process. The discovered information is retained
in this table for at least t11FcsFabricDiscoveryTimeOut
seconds after the completion of its discovery or until
the discovered cache is invalidated."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4"
::= { t11FcsDiscoveredConfig 6 }
t11FcsPlatformEntry OBJECT-TYPE SYNTAX T11FcsPlatformEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular platform, which is known to a switch (identified by fcmInstanceIndex and fcmSwitchIndex).
T11FCPlatformEntry对象类型语法T11FCPlatformEntry MAX-ACCESS不可访问状态当前描述“有关交换机已知的特定平台的信息（由fcmInstanceIndex和fcmSwitchIndex标识）。
A platform can contain multiple nodes. Information on nodes is contained in the t11FcsNodeNameListTable. The t11FcsPlatformNodeNameListIndex object in this table
一个平台可以包含多个节点。有关节点的信息包含在T11FCSNodeNameList表中。此表中的T11FCPlatformNodeNameElistIndex对象
points to the list of nodes contained in this platform.
Similarly, the t11FcsPlatformMgmtAddrListIndex object in
this table points to the list of management addresses
associated with this platform."
INDEX { fcmInstanceIndex, fcmSwitchIndex,
t11FcsFabricIndex, t11FcsPlatformIndex }
::= { t11FcsPlatformTable 1 }
points to the list of nodes contained in this platform.
Similarly, the t11FcsPlatformMgmtAddrListIndex object in
this table points to the list of management addresses
associated with this platform."
INDEX { fcmInstanceIndex, fcmSwitchIndex,
t11FcsFabricIndex, t11FcsPlatformIndex }
::= { t11FcsPlatformTable 1 }
T11FcsPlatformEntry ::= SEQUENCE {
t11FcsPlatformIndex Unsigned32,
t11FcsPlatformName OCTET STRING,
t11FcsPlatformType OCTET STRING,
t11FcsPlatformNodeNameListIndex T11FcListIndexPointerOrZero,
t11FcsPlatformMgmtAddrListIndex T11FcListIndexPointerOrZero,
t11FcsPlatformVendorId SnmpAdminString,
t11FcsPlatformProductId SnmpAdminString,
t11FcsPlatformProductRevLevel SnmpAdminString,
t11FcsPlatformDescription SnmpAdminString,
t11FcsPlatformLabel SnmpAdminString,
t11FcsPlatformLocation SnmpAdminString,
t11FcsPlatformSystemID SnmpAdminString,
t11FcsPlatformSysMgmtAddr T11FcListIndexPointerOrZero,
t11FcsPlatformClusterId SnmpAdminString,
t11FcsPlatformClusterMgmtAddr T11FcListIndexPointerOrZero,
t11FcsPlatformFC4Types OCTET STRING
}
T11FcsPlatformEntry ::= SEQUENCE {
t11FcsPlatformIndex Unsigned32,
t11FcsPlatformName OCTET STRING,
t11FcsPlatformType OCTET STRING,
t11FcsPlatformNodeNameListIndex T11FcListIndexPointerOrZero,
t11FcsPlatformMgmtAddrListIndex T11FcListIndexPointerOrZero,
t11FcsPlatformVendorId SnmpAdminString,
t11FcsPlatformProductId SnmpAdminString,
t11FcsPlatformProductRevLevel SnmpAdminString,
t11FcsPlatformDescription SnmpAdminString,
t11FcsPlatformLabel SnmpAdminString,
t11FcsPlatformLocation SnmpAdminString,
t11FcsPlatformSystemID SnmpAdminString,
t11FcsPlatformSysMgmtAddr T11FcListIndexPointerOrZero,
t11FcsPlatformClusterId SnmpAdminString,
t11FcsPlatformClusterMgmtAddr T11FcListIndexPointerOrZero,
t11FcsPlatformFC4Types OCTET STRING
}
t11FcsPlatformIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer value to distinguish one platform from
other platforms in the same Fabric."
::= { t11FcsPlatformEntry 1 }
t11FcsPlatformIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer value to distinguish one platform from
other platforms in the same Fabric."
::= { t11FcsPlatformEntry 1 }
t11FcsPlatformName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of this platform. The last byte of the value
indicates the format of the name (even if the name itself
is the zero-length string) as specified in FC-GS-5."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.2"
::= { t11FcsPlatformEntry 2 }
t11FcsPlatformName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of this platform. The last byte of the value
indicates the format of the name (even if the name itself
is the zero-length string) as specified in FC-GS-5."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.2"
::= { t11FcsPlatformEntry 2 }
t11FcsPlatformType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type(s) of this platform, encoded in 4 bytes as
specified in FC-GS-5."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.3"
::= { t11FcsPlatformEntry 3 }
t11FcsPlatformType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type(s) of this platform, encoded in 4 bytes as
specified in FC-GS-5."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.3"
::= { t11FcsPlatformEntry 3 }
t11FcsPlatformNodeNameListIndex OBJECT-TYPE
SYNTAX T11FcListIndexPointerOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The list of nodes for this platform. This object points
to an entry in the t11FcsNodeNameListTable."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.6"
::= { t11FcsPlatformEntry 4 }
t11FcsPlatformNodeNameListIndex OBJECT-TYPE
SYNTAX T11FcListIndexPointerOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The list of nodes for this platform. This object points
to an entry in the t11FcsNodeNameListTable."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.6"
::= { t11FcsPlatformEntry 4 }
t11FcsPlatformMgmtAddrListIndex OBJECT-TYPE
SYNTAX T11FcListIndexPointerOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The list of management addresses for this platform. This
object points to an entry in the t11FcsMgmtAddrListTable."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.7"
::= { t11FcsPlatformEntry 5 }
t11FcsPlatformMgmtAddrListIndex OBJECT-TYPE
SYNTAX T11FcListIndexPointerOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The list of management addresses for this platform. This
object points to an entry in the t11FcsMgmtAddrListTable."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.7"
::= { t11FcsPlatformEntry 5 }
t11FcsPlatformVendorId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0 | 12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the vendor of this platform, in the
format specified in FC-GS-5."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.5"
::= { t11FcsPlatformEntry 6 }
t11FcsPlatformVendorId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0 | 12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the vendor of this platform, in the
format specified in FC-GS-5."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.5"
::= { t11FcsPlatformEntry 6 }
t11FcsPlatformProductId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0 | 20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor's product and/or model identifier for this
platform, in the format specified in FC-GS-5."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.5"
::= { t11FcsPlatformEntry 7 }
t11FcsPlatformProductId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0 | 20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor's product and/or model identifier for this
platform, in the format specified in FC-GS-5."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.5"
::= { t11FcsPlatformEntry 7 }
t11FcsPlatformProductRevLevel OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0 | 4..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The product revision level for this platform, in the
format specified in FC-GS-5."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.5"
::= { t11FcsPlatformEntry 8 }
t11FcsPlatformProductRevLevel OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0 | 4..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The product revision level for this platform, in the
format specified in FC-GS-5."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.5"
::= { t11FcsPlatformEntry 8 }
t11FcsPlatformDescription OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0 | 4..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of this platform, in the
format specified in FC-GS-5. This value should
include the full name and version identification of the
platform's hardware type and software operating system."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.10"
::= { t11FcsPlatformEntry 9 }
t11FcsPlatformDescription OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0 | 4..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of this platform, in the
format specified in FC-GS-5. This value should
include the full name and version identification of the
platform's hardware type and software operating system."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.10"
::= { t11FcsPlatformEntry 9 }
t11FcsPlatformLabel OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0 | 4..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "An administratively assigned symbolic name for the platform, in the format specified in FC-GS-5." REFERENCE "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5, FC-GS-5, section 6.2.3.4.11"
T11FCPlatformLabel对象类型语法SNMPAdministring（大小（0 | 4..64））MAX-ACCESS只读状态当前描述“以FC-GS-5中规定的格式为平台管理分配的符号名。”参考“ANSI INCITS 427-2007，光纤通道-通用服务5，FC-GS-5，第6.2.3.4.11节”
::= { t11FcsPlatformEntry 10 }
::= { t11FcsPlatformEntry 10 }
t11FcsPlatformLocation OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0 | 4..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical location of the platform, in the format
specified in FC-GS-5 (e.g., 'telephone closet, 3rd floor')."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.12"
::= { t11FcsPlatformEntry 11 }
t11FcsPlatformLocation OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0 | 4..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical location of the platform, in the format
specified in FC-GS-5 (e.g., 'telephone closet, 3rd floor')."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.12"
::= { t11FcsPlatformEntry 11 }
t11FcsPlatformSystemID OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0 | 4..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An identifier for a hosting system that this platform is
associated with. This identifier is used to associate
platforms of logical types (e.g., logical partitions) with
a physical system."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.5"
::= { t11FcsPlatformEntry 12 }
t11FcsPlatformSystemID OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0 | 4..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An identifier for a hosting system that this platform is
associated with. This identifier is used to associate
platforms of logical types (e.g., logical partitions) with
a physical system."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.5"
::= { t11FcsPlatformEntry 12 }
t11FcsPlatformSysMgmtAddr OBJECT-TYPE
SYNTAX T11FcListIndexPointerOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A list of management addresses for the platform."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, sections 6.2.3.4.5 and 6.2.3.2.7."
::= { t11FcsPlatformEntry 13 }
t11FcsPlatformSysMgmtAddr OBJECT-TYPE
SYNTAX T11FcListIndexPointerOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A list of management addresses for the platform."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, sections 6.2.3.4.5 and 6.2.3.2.7."
::= { t11FcsPlatformEntry 13 }
t11FcsPlatformClusterId OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0 | 4..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "An identifier for a cluster that this platform is associated with, where a cluster is a set of independent platforms that are managed together to provide increased performance capabilities, failover, etc."
T11FCplatformClusterId对象类型语法SNMPAdministring（大小（0 | 4..64））MAX-ACCESS只读状态当前描述“此平台关联的群集的标识符，其中群集是一组独立的平台，它们一起管理以提供更高的性能、故障切换等。”
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.5"
::= { t11FcsPlatformEntry 14 }
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.5"
::= { t11FcsPlatformEntry 14 }
t11FcsPlatformClusterMgmtAddr OBJECT-TYPE
SYNTAX T11FcListIndexPointerOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A list of management addresses for the cluster identified
in the corresponding instance of t11FcsPlatformClusterId."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, sections 6.2.3.4.5 and 6.2.3.2.7."
::= { t11FcsPlatformEntry 15 }
t11FcsPlatformClusterMgmtAddr OBJECT-TYPE
SYNTAX T11FcListIndexPointerOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A list of management addresses for the cluster identified
in the corresponding instance of t11FcsPlatformClusterId."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, sections 6.2.3.4.5 and 6.2.3.2.7."
::= { t11FcsPlatformEntry 15 }
t11FcsPlatformFC4Types OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0 | 32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The FC-4 types supported by this platform, formatted as
a bit mask as specified in FC-GS-5. If this object
contains the zero-length string, the types are unknown."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.5"
::= { t11FcsPlatformEntry 16 }
t11FcsPlatformFC4Types OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0 | 32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The FC-4 types supported by this platform, formatted as
a bit mask as specified in FC-GS-5. If this object
contains the zero-length string, the types are unknown."
REFERENCE
"ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
FC-GS-5, section 6.2.3.4.5"
::= { t11FcsPlatformEntry 16 }
-- -- Node Name List table --
----节点名称列表表--
t11FcsNodeNameListTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcsNodeNameListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all the lists of nodes."
::= { t11FcsDiscoveredConfig 7 }
t11FcsNodeNameListTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcsNodeNameListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all the lists of nodes."
::= { t11FcsDiscoveredConfig 7 }
t11FcsNodeNameListEntry OBJECT-TYPE SYNTAX T11FcsNodeNameListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a node, which is known to a
t11FcsNodeNameListEntry对象类型语法t11FcsNodeNameListEntry MAX-ACCESS不可访问状态当前描述“有关节点的信息，该信息为
switch (identified by fcmInstanceIndex and
fcmSwitchIndex)."
INDEX { fcmInstanceIndex, fcmSwitchIndex,
t11FcsNodeNameListIndex, t11FcsNodeName }
::= { t11FcsNodeNameListTable 1 }
switch (identified by fcmInstanceIndex and
fcmSwitchIndex)."
INDEX { fcmInstanceIndex, fcmSwitchIndex,
t11FcsNodeNameListIndex, t11FcsNodeName }
::= { t11FcsNodeNameListTable 1 }
T11FcsNodeNameListEntry ::= SEQUENCE {
t11FcsNodeNameListIndex T11FcListIndex,
t11FcsNodeName FcNameIdOrZero
}
T11FcsNodeNameListEntry ::= SEQUENCE {
t11FcsNodeNameListIndex T11FcListIndex,
t11FcsNodeName FcNameIdOrZero
}
t11FcsNodeNameListIndex OBJECT-TYPE
SYNTAX T11FcListIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value of the node name list."
::= { t11FcsNodeNameListEntry 1 }
t11FcsNodeNameListIndex OBJECT-TYPE
SYNTAX T11FcListIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value of the node name list."
::= { t11FcsNodeNameListEntry 1 }
t11FcsNodeName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE(8 | 16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of this node."
::= { t11FcsNodeNameListEntry 2 }
t11FcsNodeName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE(8 | 16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of this node."
::= { t11FcsNodeNameListEntry 2 }
-- -- Statistics --
----统计数字--
t11FcsStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all the statistics related
to the Fabric Configuration Server."
::= { t11FcsStats 1 }
t11FcsStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all the statistics related
to the Fabric Configuration Server."
::= { t11FcsStats 1 }
t11FcsStatsEntry OBJECT-TYPE SYNTAX T11FcsStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of statistics for a particular Fabric (identified by t11FcsFabricIndex) on a switch (identified by fcmInstanceIndex and fcmSwitchIndex)."
t11FcsStatsEntry对象类型语法t11FcsStatsEntry MAX-ACCESS不可访问状态当前描述“交换机（由FCMINSTANCINDEX和FCMSWITCINDEX标识）上特定结构（由T11FCSFRACINDEX标识）的一组统计信息。”
INDEX { fcmInstanceIndex, fcmSwitchIndex, t11FcsFabricIndex }
::= { t11FcsStatsTable 1 }
INDEX { fcmInstanceIndex, fcmSwitchIndex, t11FcsFabricIndex }
::= { t11FcsStatsTable 1 }
T11FcsStatsEntry ::= SEQUENCE {
t11FcsInGetReqs Counter32,
t11FcsOutGetReqs Counter32,
t11FcsInRegReqs Counter32,
t11FcsOutRegReqs Counter32,
t11FcsInDeregReqs Counter32,
t11FcsOutDeregReqs Counter32,
t11FcsRejects Counter32
}
T11FcsStatsEntry ::= SEQUENCE {
t11FcsInGetReqs Counter32,
t11FcsOutGetReqs Counter32,
t11FcsInRegReqs Counter32,
t11FcsOutRegReqs Counter32,
t11FcsInDeregReqs Counter32,
t11FcsOutDeregReqs Counter32,
t11FcsRejects Counter32
}
t11FcsInGetReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Get Requests received by the Fabric Configuration Server on this Fabric.
t11FcsInGetReqs对象类型语法计数器32 MAX-ACCESS只读状态当前描述“结构配置服务器在此结构上接收的Get请求数。
This counter has no discontinuities other than
those that all Counter32s have when sysUpTime=0."
::= { t11FcsStatsEntry 1 }
This counter has no discontinuities other than
those that all Counter32s have when sysUpTime=0."
::= { t11FcsStatsEntry 1 }
t11FcsOutGetReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Get Requests sent by the Fabric Configuration Server on this Fabric to other servers in the Fabric.
t11FcsOutGetReqs对象类型语法计数器32 MAX-ACCESS只读状态当前描述“此结构上的结构配置服务器发送到结构中其他服务器的Get请求数。
This counter has no discontinuities other than
those that all Counter32s have when sysUpTime=0."
::= { t11FcsStatsEntry 2 }
This counter has no discontinuities other than
those that all Counter32s have when sysUpTime=0."
::= { t11FcsStatsEntry 2 }
t11FcsInRegReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Registration Requests received by the Fabric Configuration Server on this Fabric.
t11FcsInRegReqs对象类型语法计数器32 MAX-ACCESS只读状态当前描述“结构配置服务器在此结构上接收的注册请求数。
This counter has no discontinuities other than
those that all Counter32s have when sysUpTime=0."
::= { t11FcsStatsEntry 3 }
This counter has no discontinuities other than
those that all Counter32s have when sysUpTime=0."
::= { t11FcsStatsEntry 3 }
t11FcsOutRegReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Registration Requests sent by the Fabric Configuration Server on this Fabric.
t11FcsOutRegReqs对象类型语法计数器32 MAX-ACCESS只读状态当前描述“结构配置服务器在此结构上发送的注册请求数。
This counter has no discontinuities other than
those that all Counter32s have when sysUpTime=0."
::= { t11FcsStatsEntry 4 }
This counter has no discontinuities other than
those that all Counter32s have when sysUpTime=0."
::= { t11FcsStatsEntry 4 }
t11FcsInDeregReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Deregistration Requests received by the Fabric Configuration Server on this Fabric.
T11FCSINDEREGRQS对象类型语法计数器32 MAX-ACCESS只读状态当前描述“结构配置服务器在此结构上接收的注销请求数。
This counter has no discontinuities other than
those that all Counter32s have when sysUpTime=0."
::= { t11FcsStatsEntry 5 }
This counter has no discontinuities other than
those that all Counter32s have when sysUpTime=0."
::= { t11FcsStatsEntry 5 }
t11FcsOutDeregReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Deregistration Requests sent by the Fabric Configuration Server on this Fabric.
t11FcsOutDeregReqs对象类型语法计数器32 MAX-ACCESS只读状态当前描述“结构配置服务器在此结构上发送的注销请求数。
This counter has no discontinuities other than
those that all Counter32s have when sysUpTime=0."
::= { t11FcsStatsEntry 6 }
This counter has no discontinuities other than
those that all Counter32s have when sysUpTime=0."
::= { t11FcsStatsEntry 6 }
t11FcsRejects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of requests rejected by the Fabric Configuration Server on this Fabric.
t11FcsRejects OBJECT-TYPE SYNTAX counter 32 MAX-ACCESS只读状态current DESCRIPTION“此结构上的结构配置服务器拒绝的请求总数。
This counter has no discontinuities other than
those that all Counter32s have when sysUpTime=0."
::= { t11FcsStatsEntry 7 }
This counter has no discontinuities other than
those that all Counter32s have when sysUpTime=0."
::= { t11FcsStatsEntry 7 }
-- -- Notification Control Table --
----通知控制表--
t11FcsNotifyControlTable OBJECT-TYPE SYNTAX SEQUENCE OF T11FcsNotifyControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of control information for notifications generated due to Fabric Configuration Server events.
T11FCNOTIFYCONTROLTable T11FCNOTIFYCONTROLENTRY的对象类型语法序列MAX-ACCESS不可访问状态当前描述“由于结构配置服务器事件而生成的通知的控制信息表。
Values written to objects in this table should be
persistent/retained over agent reboots."
::= { t11FcsNotificationInfo 1 }
Values written to objects in this table should be
persistent/retained over agent reboots."
::= { t11FcsNotificationInfo 1 }
t11FcsNotifyControlEntry OBJECT-TYPE
SYNTAX T11FcsNotifyControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains notification control information
for a Fabric Configuration Server on a particular Fabric
(identified by t11FcsFabricIndex) on a particular
switch (identified by fcmInstanceIndex and
fcmSwitchIndex)."
INDEX { fcmInstanceIndex, fcmSwitchIndex,
t11FcsFabricIndex }
::= { t11FcsNotifyControlTable 1 }
t11FcsNotifyControlEntry OBJECT-TYPE
SYNTAX T11FcsNotifyControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains notification control information
for a Fabric Configuration Server on a particular Fabric
(identified by t11FcsFabricIndex) on a particular
switch (identified by fcmInstanceIndex and
fcmSwitchIndex)."
INDEX { fcmInstanceIndex, fcmSwitchIndex,
t11FcsFabricIndex }
::= { t11FcsNotifyControlTable 1 }
T11FcsNotifyControlEntry ::= SEQUENCE {
t11FcsReqRejectNotifyEnable TruthValue,
t11FcsDiscoveryCompNotifyEnable TruthValue,
t11FcsMgmtAddrChangeNotifyEnable TruthValue,
t11FcsRejectCtCommandString OCTET STRING,
t11FcsRejectRequestSource FcNameIdOrZero,
t11FcsRejectReasonCode T11NsGs4RejectReasonCode,
t11FcsRejectReasonCodeExp T11FcsRejectReasonExplanation,
t11FcsRejectReasonVendorCode OCTET STRING
}
T11FcsNotifyControlEntry ::= SEQUENCE {
t11FcsReqRejectNotifyEnable TruthValue,
t11FcsDiscoveryCompNotifyEnable TruthValue,
t11FcsMgmtAddrChangeNotifyEnable TruthValue,
t11FcsRejectCtCommandString OCTET STRING,
t11FcsRejectRequestSource FcNameIdOrZero,
t11FcsRejectReasonCode T11NsGs4RejectReasonCode,
t11FcsRejectReasonCodeExp T11FcsRejectReasonExplanation,
t11FcsRejectReasonVendorCode OCTET STRING
}
t11FcsReqRejectNotifyEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write
T11FCSREQ REJECTNOTIFYENABLE对象类型语法TruthValue MAX-ACCESS读写
STATUS current DESCRIPTION "This object specifies if the Fabric Configuration Server should generate 't11FcsRqRejectNotification' notifications.
STATUS current DESCRIPTION“此对象指定结构配置服务器是否应生成“t11FcsRqRejectNotification”通知。
If the value of this object is 'true', then the
notification is issued. If the value of this object
is 'false', then the notification is not issued."
DEFVAL { false }
::= { t11FcsNotifyControlEntry 1 }
If the value of this object is 'true', then the
notification is issued. If the value of this object
is 'false', then the notification is not issued."
DEFVAL { false }
::= { t11FcsNotifyControlEntry 1 }
t11FcsDiscoveryCompNotifyEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies if the Fabric Configuration Server should generate 't11FcsDiscoveryCompleteNotify' notifications.
T11FCDiscoveryCompNotifyEnable对象类型语法TruthValue MAX-ACCESS读写状态当前描述“此对象指定结构配置服务器是否应生成“T11FCDiscoveryCompleteNotify”通知。
If the value of this object is 'true', then the
notification is issued. If the value of this object
is 'false', then the notification is not issued."
DEFVAL { false }
::= { t11FcsNotifyControlEntry 2 }
If the value of this object is 'true', then the
notification is issued. If the value of this object
is 'false', then the notification is not issued."
DEFVAL { false }
::= { t11FcsNotifyControlEntry 2 }
t11FcsMgmtAddrChangeNotifyEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies if the Fabric Configuration Server should generate 't11FcsMgmtAddrChangeNotify' notifications.
t11FcsMgmtAddrChangeNotifyEnable对象类型语法TruthValue MAX-ACCESS读写状态当前描述“此对象指定结构配置服务器是否应生成“T11FCSMMTADDDRChangeNotify”通知。
If the value of this object is 'true', then the
notification is issued. If the value of this object
is 'false', then the notification is not issued."
DEFVAL { false }
::= { t11FcsNotifyControlEntry 3 }
If the value of this object is 'true', then the
notification is issued. If the value of this object
is 'false', then the notification is not issued."
DEFVAL { false }
::= { t11FcsNotifyControlEntry 3 }
t11FcsRejectCtCommandString OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The binary content of the Fabric Configuration Server
t11FcsRejectCtCommandString对象类型语法八位字符串（大小（0..255））最大访问只读状态当前描述“结构配置服务器的二进制内容
request, formatted as an octet string (in network byte order) containing the Common Transport Information Unit (CT_IU), as described in Table 2 of FC-GS-5 (including the preamble), which was most recently rejected by the Fabric Configuration Server for this Fabric.
请求，格式为八位字节字符串（网络字节顺序），包含通用传输信息单元（CT_IU），如FC-GS-5表2所述（包括前导），最近被该结构的结构配置服务器拒绝。
This object contains the zero-length string if and when the CT-IU's content is unavailable.
当CT-IU的内容不可用时，此对象包含零长度字符串。
When the length of this object is 255 octets, it contains
the first 255 octets of the CT-IU (in network byte order)."
::= { t11FcsNotifyControlEntry 4 }
When the length of this object is 255 octets, it contains
the first 255 octets of the CT-IU (in network byte order)."
::= { t11FcsNotifyControlEntry 4 }
t11FcsRejectRequestSource OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The WWN that was the source of the CT_IU contained in
the corresponding instance of t11FcsRejectCtCommandString."
::= { t11FcsNotifyControlEntry 5 }
t11FcsRejectRequestSource OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The WWN that was the source of the CT_IU contained in
the corresponding instance of t11FcsRejectCtCommandString."
::= { t11FcsNotifyControlEntry 5 }
t11FcsRejectReasonCode OBJECT-TYPE
SYNTAX T11NsGs4RejectReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the reason code corresponding
to the latest Fabric Configuration Server request
rejected by the local system."
::= { t11FcsNotifyControlEntry 6 }
t11FcsRejectReasonCode OBJECT-TYPE
SYNTAX T11NsGs4RejectReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the reason code corresponding
to the latest Fabric Configuration Server request
rejected by the local system."
::= { t11FcsNotifyControlEntry 6 }
t11FcsRejectReasonCodeExp OBJECT-TYPE
SYNTAX T11FcsRejectReasonExplanation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the corresponding instance of
t11FcsRejectReasonCode has the value: 'unable to
perform command request', this object contains the
corresponding reason code explanation."
::= { t11FcsNotifyControlEntry 7 }
t11FcsRejectReasonCodeExp OBJECT-TYPE
SYNTAX T11FcsRejectReasonExplanation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the corresponding instance of
t11FcsRejectReasonCode has the value: 'unable to
perform command request', this object contains the
corresponding reason code explanation."
::= { t11FcsNotifyControlEntry 7 }
t11FcsRejectReasonVendorCode OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-only STATUS current DESCRIPTION
t11FcsRejectReasonVendorCode对象类型语法八位字节字符串（大小（1））最大访问只读状态当前说明
"A registration reject vendor-specific code. This
object contains the vendor-specific code of the most
recently rejected Fabric Configuration Server
Registration request for the particular port on
the particular Fabric."
::= { t11FcsNotifyControlEntry 8 }
--
-- Notifications
--
"A registration reject vendor-specific code. This
object contains the vendor-specific code of the most
recently rejected Fabric Configuration Server
Registration request for the particular port on
the particular Fabric."
::= { t11FcsNotifyControlEntry 8 }
--
-- Notifications
--
t11FcsRqRejectNotification NOTIFICATION-TYPE OBJECTS { t11FamLocalSwitchWwn, t11FcsRejectReasonCode, t11FcsRejectReasonCodeExp, t11FcsRejectReasonVendorCode } STATUS current DESCRIPTION "This notification is generated whenever the Fabric Configuration Server on a switch (indicated by the value of t11FamLocalSwitchWwn) rejects a Fabric Configuration Server request.
t11FcsRqRejectNotification通知类型对象{t11FamLocalSwitchWwn，T11FCSRREJECTREASENCODE，T11FCSRREJECTREASENCODEEXP，T11FCSRREJECTREASENDORCODE}状态当前描述“每当交换机上的结构配置服务器（由t11FamLocalSwitchWwn值指示）时，都会生成此通知”拒绝结构配置服务器请求。
The Fabric Configuration Server should update the
t11FcsRejectReasonCode, t11FcsRejectReasonCodeExp
and t11FcsRejectReasonVendorCode objects with the
corresponding reason code, explanation and vendor
specific code before sending the notification."
::= { t11FcsNotifications 1 }
The Fabric Configuration Server should update the
t11FcsRejectReasonCode, t11FcsRejectReasonCodeExp
and t11FcsRejectReasonVendorCode objects with the
corresponding reason code, explanation and vendor
specific code before sending the notification."
::= { t11FcsNotifications 1 }
t11FcsDiscoveryCompleteNotify NOTIFICATION-TYPE
OBJECTS {t11FcsFabricDiscoveryRangeLow}
STATUS current
DESCRIPTION
"This notification is generated by the Fabric
Configuration Server on the completion of the
discovery of Fabrics in the range that has
t11FcsFabricDiscoveryRangeLow at its low end."
::= { t11FcsNotifications 2 }
t11FcsDiscoveryCompleteNotify NOTIFICATION-TYPE
OBJECTS {t11FcsFabricDiscoveryRangeLow}
STATUS current
DESCRIPTION
"This notification is generated by the Fabric
Configuration Server on the completion of the
discovery of Fabrics in the range that has
t11FcsFabricDiscoveryRangeLow at its low end."
::= { t11FcsNotifications 2 }
t11FcsMgmtAddrChangeNotify NOTIFICATION-TYPE OBJECTS { t11FcsMgmtAddrChangeFabricIndex, t11FcsMgmtAddrChangeIeName } STATUS current DESCRIPTION "This notification is generated by the Fabric Configuration Server whenever the management address of an IE changes, i.e., whenever an entry in the t11FcsMgmtAddrListTable changes."
t11FcsMgmtAddrChangeNotify通知类型对象{t11FcsMgmtAddrChangeFabricIndex，t11FcsMgmtAddrChangeIeName}状态当前描述“每当IE的管理地址更改时，即每当T11FCSMTADDRListable中的条目更改时，结构配置服务器都会生成此通知。”
::= { t11FcsNotifications 3 }
::= { t11FcsNotifications 3 }
t11FcsMgmtAddrChangeFabricIndex OBJECT-TYPE
SYNTAX T11FabricIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The index value that identifies the Fabric on which
a management address change has been detected."
::= { t11FcsNotificationInfo 2 }
t11FcsMgmtAddrChangeFabricIndex OBJECT-TYPE
SYNTAX T11FabricIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The index value that identifies the Fabric on which
a management address change has been detected."
::= { t11FcsNotificationInfo 2 }
t11FcsMgmtAddrChangeIeName OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The IE for which a management address change has been
detected."
::= { t11FcsNotificationInfo 3 }
t11FcsMgmtAddrChangeIeName OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The IE for which a management address change has been
detected."
::= { t11FcsNotificationInfo 3 }
-- Conformance
--一致性
t11FcsMIBCompliances OBJECT IDENTIFIER ::= { t11FcsMIBConformance 1 }
t11FcsMIBGroups OBJECT IDENTIFIER ::= { t11FcsMIBConformance 2 }
t11FcsMIBCompliances OBJECT IDENTIFIER ::= { t11FcsMIBConformance 1 }
t11FcsMIBGroups OBJECT IDENTIFIER ::= { t11FcsMIBConformance 2 }
t11FcsMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities that implement the Fabric Configuration Server." MODULE MANDATORY-GROUPS { t11FcsDiscoveredConfigGroup, t11FcsDiscoveryStatusGroup, t11FcsNotificationInfoGroup, t11FcsNotificationGroup }
T11FCSMIB COMPLIANCE MODULE-COMPLIANCE STATUS当前描述“实现结构配置服务器的实体的符合性声明”。模块必填组{T11FCDISCOVEREDCONFIGGROUP，T11FCDISCOVERYSTATUS GROUP，T11FCNOTIficationInfoGROUP，T11FCNOTIficationGROUP}
GROUP t11FcsDiscoveryControlGroup DESCRIPTION "This group is mandatory only for those systems that allow discovery of configuration by Fabric Configuration Servers to be controlled via a MIB."
组T11FCDISCOVERYCONTROLGROUP DESCRIPTION“此组仅对于允许通过MIB控制结构配置服务器发现配置的系统是必需的。”
GROUP t11FcsStatisticsGroup DESCRIPTION "These counters, containing Fabric Configuration Server statistics, are mandatory only for those systems that count such events."
GROUP t11FcsStatisticsGroup DESCRIPTION“这些计数器包含结构配置服务器统计信息，仅对统计此类事件的系统是必需的。”
OBJECT t11FcsDiscoveryStatus WRITE-SYNTAX INTEGER { localOnly(3) } MIN-ACCESS read-only DESCRIPTION "Write access is not required. However, if write access is supported, then the only writable value is 'localOnly'."
对象T11FCDISCOVERYSTATUS WRITE-SYNTAX INTEGER{localOnly（3）}MIN-ACCESS只读说明“不需要写访问。但是，如果支持写访问，则唯一可写的值是‘localOnly’。”
OBJECT t11FcsReqRejectNotifyEnable MIN-ACCESS read-only DESCRIPTION "Write access is not required."
对象T11FCSREQ REJECTNOTIFYENABLE MIN-ACCESS只读说明“不需要写访问。”
OBJECT t11FcsDiscoveryCompNotifyEnable MIN-ACCESS read-only DESCRIPTION "Write access is not required."
对象T11FCDiscoveryCompNotifyEnable MIN-ACCESS只读说明“不需要写访问。”
OBJECT t11FcsMgmtAddrChangeNotifyEnable MIN-ACCESS read-only DESCRIPTION "Write access is not required."
对象t11FcsMgmtAddrChangeNotifyEnable最小访问只读说明“不需要写访问。”
::= { t11FcsMIBCompliances 1 }
::= { t11FcsMIBCompliances 1 }
-- Units of Conformance
--一致性单位
t11FcsDiscoveryControlGroup OBJECT-GROUP
OBJECTS { t11FcsFabricDiscoveryRangeLow,
t11FcsFabricDiscoveryRangeHigh,
t11FcsFabricDiscoveryStart,
t11FcsFabricDiscoveryTimeOut }
STATUS current
DESCRIPTION
"A collection of objects for requesting a Fabric
Configuration Server to discover the configuration
of one or more Fabrics."
::= { t11FcsMIBGroups 1 }
t11FcsDiscoveryControlGroup OBJECT-GROUP
OBJECTS { t11FcsFabricDiscoveryRangeLow,
t11FcsFabricDiscoveryRangeHigh,
t11FcsFabricDiscoveryStart,
t11FcsFabricDiscoveryTimeOut }
STATUS current
DESCRIPTION
"A collection of objects for requesting a Fabric
Configuration Server to discover the configuration
of one or more Fabrics."
::= { t11FcsMIBGroups 1 }
t11FcsDiscoveryStatusGroup OBJECT-GROUP OBJECTS { t11FcsDiscoveryStatus, t11FcsDiscoveryCompleteTime } STATUS current DESCRIPTION "A collection of objects with which to monitor the status of discovery (of Fabric configurations) by Fabric Configuration Servers."
T11FCDISCOVERYSTATUS组对象组对象{T11FCDISCOVERYSTATUS，T11FCDISCOVERYCOMPLETETIME}状态当前描述“用于监视结构配置服务器发现（结构配置）状态的对象集合。”
::= { t11FcsMIBGroups 2 }
::= { t11FcsMIBGroups 2 }
t11FcsDiscoveredConfigGroup OBJECT-GROUP
OBJECTS {
t11FcsIeType,
t11FcsIeDomainId,
t11FcsIeMgmtId,
t11FcsIeFabricName,
t11FcsIeLogicalName,
t11FcsIeMgmtAddrListIndex,
t11FcsIeInfoList,
t11FcsMgmtAddr,
t11FcsPortType,
t11FcsPortTxType,
t11FcsPortModuleType,
t11FcsPortPhyPortNum,
t11FcsPortAttachPortNameIndex,
t11FcsPortState,
t11FcsPortSpeedCapab,
t11FcsPortOperSpeed,
t11FcsPortZoningEnfStatus,
t11FcsAttachPortName,
t11FcsPlatformName,
t11FcsPlatformType,
t11FcsPlatformNodeNameListIndex,
t11FcsPlatformMgmtAddrListIndex,
t11FcsPlatformVendorId,
t11FcsPlatformProductId,
t11FcsPlatformProductRevLevel,
t11FcsPlatformDescription,
t11FcsPlatformLabel,
t11FcsPlatformLocation,
t11FcsPlatformSystemID,
t11FcsPlatformSysMgmtAddr,
t11FcsPlatformClusterId,
t11FcsPlatformClusterMgmtAddr,
t11FcsPlatformFC4Types,
t11FcsNodeName }
STATUS current
DESCRIPTION
"A collection of objects to contain the Fabric configuration
information discovered by Fabric Configuration Servers."
::= { t11FcsMIBGroups 3 }
t11FcsDiscoveredConfigGroup OBJECT-GROUP
OBJECTS {
t11FcsIeType,
t11FcsIeDomainId,
t11FcsIeMgmtId,
t11FcsIeFabricName,
t11FcsIeLogicalName,
t11FcsIeMgmtAddrListIndex,
t11FcsIeInfoList,
t11FcsMgmtAddr,
t11FcsPortType,
t11FcsPortTxType,
t11FcsPortModuleType,
t11FcsPortPhyPortNum,
t11FcsPortAttachPortNameIndex,
t11FcsPortState,
t11FcsPortSpeedCapab,
t11FcsPortOperSpeed,
t11FcsPortZoningEnfStatus,
t11FcsAttachPortName,
t11FcsPlatformName,
t11FcsPlatformType,
t11FcsPlatformNodeNameListIndex,
t11FcsPlatformMgmtAddrListIndex,
t11FcsPlatformVendorId,
t11FcsPlatformProductId,
t11FcsPlatformProductRevLevel,
t11FcsPlatformDescription,
t11FcsPlatformLabel,
t11FcsPlatformLocation,
t11FcsPlatformSystemID,
t11FcsPlatformSysMgmtAddr,
t11FcsPlatformClusterId,
t11FcsPlatformClusterMgmtAddr,
t11FcsPlatformFC4Types,
t11FcsNodeName }
STATUS current
DESCRIPTION
"A collection of objects to contain the Fabric configuration
information discovered by Fabric Configuration Servers."
::= { t11FcsMIBGroups 3 }
t11FcsStatisticsGroup OBJECT-GROUP OBJECTS { t11FcsInGetReqs, t11FcsOutGetReqs, t11FcsInRegReqs,
T11FCS统计组对象组对象{t11FcsInGetReqs，t11FcsInGetReqs，T11FCSINGREGREQS，
t11FcsOutRegReqs,
t11FcsInDeregReqs,
t11FcsOutDeregReqs,
t11FcsRejects }
STATUS current
DESCRIPTION
"A collection of objects for Fabric Configuration Server
statistics information."
::= { t11FcsMIBGroups 4 }
t11FcsOutRegReqs,
t11FcsInDeregReqs,
t11FcsOutDeregReqs,
t11FcsRejects }
STATUS current
DESCRIPTION
"A collection of objects for Fabric Configuration Server
statistics information."
::= { t11FcsMIBGroups 4 }
t11FcsNotificationInfoGroup OBJECT-GROUP
OBJECTS { t11FcsReqRejectNotifyEnable,
t11FcsDiscoveryCompNotifyEnable,
t11FcsMgmtAddrChangeNotifyEnable,
t11FcsRejectCtCommandString,
t11FcsRejectRequestSource,
t11FcsRejectReasonCode,
t11FcsRejectReasonCodeExp,
t11FcsRejectReasonVendorCode,
t11FcsMgmtAddrChangeFabricIndex,
t11FcsMgmtAddrChangeIeName }
STATUS current
DESCRIPTION
"A collection of notification control and notification
information objects for monitoring Fabric
Configuration Servers."
::= { t11FcsMIBGroups 5 }
t11FcsNotificationInfoGroup OBJECT-GROUP
OBJECTS { t11FcsReqRejectNotifyEnable,
t11FcsDiscoveryCompNotifyEnable,
t11FcsMgmtAddrChangeNotifyEnable,
t11FcsRejectCtCommandString,
t11FcsRejectRequestSource,
t11FcsRejectReasonCode,
t11FcsRejectReasonCodeExp,
t11FcsRejectReasonVendorCode,
t11FcsMgmtAddrChangeFabricIndex,
t11FcsMgmtAddrChangeIeName }
STATUS current
DESCRIPTION
"A collection of notification control and notification
information objects for monitoring Fabric
Configuration Servers."
::= { t11FcsMIBGroups 5 }
t11FcsNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { t11FcsRqRejectNotification,
t11FcsDiscoveryCompleteNotify,
t11FcsMgmtAddrChangeNotify }
STATUS current
DESCRIPTION
"A collection of notifications for monitoring Fabric
Configuration Servers."
::= { t11FcsMIBGroups 6 }
t11FcsNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { t11FcsRqRejectNotification,
t11FcsDiscoveryCompleteNotify,
t11FcsMgmtAddrChangeNotify }
STATUS current
DESCRIPTION
"A collection of notifications for monitoring Fabric
Configuration Servers."
::= { t11FcsMIBGroups 6 }
END
终止
IANA has assigned a MIB OID (162) under the mib-2 subtree.
IANA在MIB-2子树下分配了一个MIB OID（162）。
There are several management objects defined in this MIB module with a MAX-ACCESS clause of read-write and/or read-create. Such objects may be considered sensitive or vulnerable in some network environments. The support for SET operations in a non-secure environment without proper protection can have a negative effect on network operations. These objects and their sensitivity/vulnerability is:
此MIB模块中定义了多个管理对象，其MAX-ACCESS子句为read-write和/或read create。在某些网络环境中，此类对象可能被视为敏感或易受攻击。在没有适当保护的非安全环境中支持SET操作可能会对网络操作产生负面影响。这些对象及其敏感度/脆弱性为：
t11FcsFabricDiscoveryRangeLow t11FcsFabricDiscoveryRangeHigh t11FcsFabricDiscoveryTimeOut t11FcsFabricDiscoveryStart -- the ability to specify parameters for, and trigger the start of, a topology discovery. t11FcsDiscoveryStatus -- the ability to abort a discovery, or invalidate discovered information. t11FcsReqRejectNotifyEnable t11FcsDiscoveryCompNotifyEnable t11FcsMgmtAddrChangeNotifyEnable -- the ability to enable/disable notifications.
T11FCSFactDiscoveryRangeLow T11FCSFactDiscoveryRangeHigh T11FCSFactDiscoveryTimeout T11FCSFactDiscoveryStart--为拓扑发现指定参数并触发拓扑发现开始的功能。T11FCDISCOVERYSTATUS—中止发现或使发现的信息无效的能力。t11FcsReqRejectNotifyEnable T11FCDiscoveryCompNotifyEnable t11FcsMgmtAddrChangeNotifyEnable—启用/禁用通知的功能。
Such objects may be considered sensitive or vulnerable in some network environments. For example, the ability to invalidate discovered topology may afford an attacker the ability to hide the presence of unauthorized equipment on the network. The support for SET operations in a non-secure environment without proper protection can have a negative effect on network operations.
在某些网络环境中，此类对象可能被视为敏感或易受攻击。例如，使发现的拓扑无效的能力可能使攻击者能够隐藏网络上存在未经授权的设备。在没有适当保护的非安全环境中支持SET操作可能会对网络操作产生负面影响。
Some of the readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) may be considered sensitive or vulnerable in some network environments. It is thus important to control even GET and/or NOTIFY access to these objects and possibly to even encrypt the values of these objects when sending them over the network via SNMP. These are the tables and objects and their sensitivity/vulnerability:
在某些网络环境中，此MIB模块中的某些可读对象（即具有MAX-ACCESS而非not ACCESS的对象）可能被视为敏感或易受攻击。因此，在通过SNMP通过网络发送这些对象时，控制甚至获取和/或通知对这些对象的访问，甚至可能加密这些对象的值，这一点非常重要。以下是表和对象及其敏感度/漏洞：
t11FcsIeTable t11FcsMgmtAddrListTable t11FcsPortTable t11FcsAttachPortNameListTable t11FcsPlatformTable
t11FcsIeTable t11FcsMgmtAddrListTable t11FcsPortTable t11FcsAttachPortNameListTable t11FcsPlatformTable
t11FcsNodeNameListTable -- contains information about the topology of the Fibre Channel network.
t11FcsNodeNameListTable--包含有关光纤通道网络拓扑的信息。
t11FcsStatsTable -- contains statistics information about the operation of the Fabric Configuration Server.
t11FcsStatsTable--包含有关结构配置服务器操作的统计信息。
SNMP versions prior to SNMPv3 did not include adequate security. Even if the network itself is secure (for example by using IPsec), even then, there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB module.
SNMPv3之前的SNMP版本未包含足够的安全性。即使网络本身是安全的（例如通过使用IPsec），即使如此，也无法控制安全网络上的谁可以访问和获取/设置（读取/更改/创建/删除）此MIB模块中的对象。
It is RECOMMENDED that implementors consider the security features as provided by the SNMPv3 framework (see [RFC3410], section 8), including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy).
建议执行者考虑SNMPv3框架所提供的安全特性（参见[RCFC310]，第8节），包括对SNMPv3加密机制的完全支持（用于身份验证和隐私）。
Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of this MIB module is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them.
此外，不建议部署SNMPv3之前的SNMP版本。相反，建议部署SNMPv3并启用加密安全性。然后，客户/运营商应负责确保授予访问此MIB模块实例权限的SNMP实体已正确配置为仅授予那些拥有确实获取或设置（更改/创建/删除）对象的合法权限的主体（用户）访问对象。
This document was originally developed and approved by the INCITS Task Group T11.5 (http://www.t11.org) as the SM-FCFGM project. We wish to acknowledge the many contributions and comments from the INCITS Technical Committee T11, especially from the following:
本文件最初由INCITS任务组T11.5编制和批准(http://www.t11.org)作为SM-FCFGM项目。我们希望感谢INCITS技术委员会T11的许多贡献和评论，特别是以下方面：
T11 Chair: Robert Snively, Brocade T11 Vice Chair: Claudio DeSanti, Cisco Systems T11.5 Chair: Roger Cummings, Symantec T11.5 Vice Chair: Scott Kipp, McData and T11.5 members.
T11主席：Robert Snifly，Brocade T11副主席：Claudio DeSanti，Cisco Systems T11.5主席：Roger Cummings，Symantec T11.5副主席：Scott Kipp，McData和T11.5成员。
The document was subsequently a work item of the IETF's IMSS Working Group, chaired by David Black (EMC Corporation). We thank Bert Wijnen (Lucent Technologies) for his thorough review of the document. We also wish to acknowledge Dan Romascanu (Avaya), the IETF Area Director, for his comments and assistance.
该文件随后成为IETF IMSS工作组的工作项目，由David Black（EMC公司）担任主席。我们感谢Bert Wijnen（朗讯科技公司）对该文件的全面审查。我们还要感谢IETF区域总监Dan Romascanu（Avaya）的评论和帮助。
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2578]McCloghrie，K.，Perkins，D.，Schoenwaeld，J.，Case，J.，Rose，M.和S.Waldbusser，“管理信息的结构版本2（SMIv2）”，STD 58，RFC 2578，1999年4月。
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999.
[RFC2579]McCloghrie，K.，Perkins，D.，Schoenwaeld，J.，Case，J.，Rose，M.和S.Waldbusser，“SMIv2的文本约定”，STD 58，RFC 2579，1999年4月。
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999.
[RFC2580]McCloghrie，K.，Perkins，D.，Schoenwaeld，J.，Case，J.，Rose，M.和S.Waldbusser，“SMIv2的一致性声明”，STD 58，RFC 25801999年4月。
[RFC2788] Freed, N. and S. Kille, "Network Services Monitoring MIB", RFC 2788, March 2000.
[RFC2788]Freed，N.和S.Kille，“网络服务监控MIB”，RFC 2788，2000年3月。
[RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture for Describing Simple Network Management Protocol (SNMP) Management Frameworks", STD 58, RFC 3411, December 2002.
[RFC3411]Harrington，D.，Presohn，R.，和B.Wijnen，“描述简单网络管理协议（SNMP）管理框架的体系结构”，STD 58，RFC 3411，2002年12月。
[FC-FS] "Fibre Channel - Framing and Signaling (FC-FS)" ANSI INCITS 373-2003, http://www.t11.org/t11/stat.nsf/upnum/1331-d, April 2003.
[FC-FS]“光纤通道-成帧和信令（FC-FS）”ANSI INCITS 373-2003，http://www.t11.org/t11/stat.nsf/upnum/1331-d，2003年4月。
[FC-GS-5] "Fibre Channel - Generic Services - 5 (FC-GS-5)", ANSI INCITS 427-2007, http://www.t11.org/t11/stat.nsf/upnum/1677-d, 2007.
[FC-GS-5]“光纤通道-通用服务-5（FC-GS-5）”，ANSI INCITS 427-2007，http://www.t11.org/t11/stat.nsf/upnum/1677-d, 2007.
[FC-SW-4] "Fibre Channel - Switch Fabric - 4 (FC-SW-4)", ANSI INCITS 418-2006, http://www.t11.org/t11/stat.nsf/upnum/1674-d, December 2006.
[FC-SW-4]“光纤通道-交换机结构-4（FC-SW-4）”，ANSI INCITS 418-2006，http://www.t11.org/t11/stat.nsf/upnum/1674-d，2006年12月。
[RFC4044] McCloghrie, K., "Fibre Channel Management MIB", RFC 4044, May 2005.
[RFC4044]McCloghrie，K.，“光纤通道管理MIB”，RFC 4044，2005年5月。
[RFC4438] DeSanti, C., Gaonkar, V., Vivek, H.K., McCloghrie, K., and S. Gai, "Fibre Channel Name Server MIB", RFC 4438, March 2006.
[RFC4438]DeSanti，C.，Gaonkar，V.，Vivek，H.K.，McCloghrie，K.，和S.Gai，“光纤通道名称服务器MIB”，RFC 4438，2006年3月。
[RFC4439] DeSanti, C., Gaonkar, V., McCloghrie, K., and S. Gai, "Fibre Channel Fabric Address Manager MIB", RFC 4439, March 2006.
[RFC4439]DeSanti，C.，Gaonkar，V.，McCloghrie，K.，和S.Gai，“光纤通道结构地址管理器MIB”，RFC 4439，2006年3月。
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2119]Bradner，S.，“RFC中用于表示需求水平的关键词”，BCP 14，RFC 2119，1997年3月。
[RFC2741] Daniele, M., Wijnen, B., Ellison, M., and D. Francisco, "Agent Extensibility (AgentX) Protocol Version 1", RFC 2741, January 2000.
[RFC2741]Daniele，M.，Wijnen，B.，Ellison，M.，和D.Francisco，“代理可扩展性（AgentX）协议版本1”，RFC 27412000年1月。
[RFC2837] Teow, K., "Definitions of Managed Objects for the Fabric Element in Fibre Channel Standard", RFC 2837, May 2000.
[RFC2837]Teow，K.，“光纤通道标准中结构元素的托管对象定义”，RFC 2837，2000年5月。
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction and Applicability Statements for Internet-Standard Management Framework", RFC 3410, December 2002.
[RFC3410]Case，J.，Mundy，R.，Partain，D.，和B.Stewart，“互联网标准管理框架的介绍和适用性声明”，RFC 34102002年12月。
[RFC4455] Hallak-Stamler, M., Bakke, M., Lederman, Y., Krueger, M., and K. McCloghrie, "Definition of Managed Objects for Small Computer System Interface (SCSI) Entities", RFC 4455, April 2006.
[RFC4455]Hallak Stamler，M.，Bakke，M.，Lederman，Y.，Krueger，M.，和K.McCloghrie，“小型计算机系统接口（SCSI）实体的托管对象定义”，RFC 4459，2006年4月。
Authors' Addresses
作者地址
Claudio DeSanti Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA Phone: +1 408 853-9172 EMail: cds@cisco.com
Claudio DeSanti Cisco Systems，Inc.美国加利福尼亚州圣何塞西塔斯曼大道170号电话：+1 408 853-9172电子邮件：cds@cisco.com
H.K. Vivek Cisco Systems, Inc. 71 Millers Rd Bangalore, India Phone: +91 80 2289933x5117 EMail: hvivek@cisco.com
H.K.Vivek Cisco Systems，Inc.印度班加罗尔米勒路71号电话：+91 80 2289933x5117电子邮件：hvivek@cisco.com
Keith McCloghrie Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA Phone: +1 408 526-5260 EMail: kzm@cisco.com
Keith McCloghrie Cisco Systems，Inc.美国加利福尼亚州圣何塞西塔斯曼大道170号电话：+1 408 526-5260电子邮件：kzm@cisco.com
Silvano Gai Nuova Systems 3 West Plumeria Drive San Jose, CA 95134 Phone: +1 408 387-6123 EMail: sgai@nuovasystems.com
Silvano Gai Nuova Systems 3 West Plumeria Drive San Jose，CA 95134电话：+1 408 387-6123电子邮件：sgai@nuovasystems.com
Full Copyright Statement
完整版权声明
Copyright (C) The IETF Trust (2007).
版权所有（C）IETF信托基金（2007年）。
This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.
本文件受BCP 78中包含的权利、许可和限制的约束，除其中规定外，作者保留其所有权利。
This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
本文件及其包含的信息以“原样”为基础提供，贡献者、他/她所代表或赞助的组织（如有）、互联网协会、IETF信托基金和互联网工程任务组不承担任何明示或暗示的担保，包括但不限于任何保证，即使用本文中的信息不会侵犯任何权利，或对适销性或特定用途适用性的任何默示保证。
Intellectual Property
知识产权
The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79.
IETF对可能声称与本文件所述技术的实施或使用有关的任何知识产权或其他权利的有效性或范围，或此类权利下的任何许可可能或可能不可用的程度，不采取任何立场；它也不表示它已作出任何独立努力来确定任何此类权利。有关RFC文件中权利的程序信息，请参见BCP 78和BCP 79。
Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr.
向IETF秘书处披露的知识产权副本和任何许可证保证，或本规范实施者或用户试图获得使用此类专有权利的一般许可证或许可的结果，可从IETF在线知识产权存储库获取，网址为http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org.
IETF邀请任何相关方提请其注意任何版权、专利或专利申请，或其他可能涵盖实施本标准所需技术的专有权利。请将信息发送至IETF的IETF-ipr@ietf.org.
Acknowledgement
确认
Funding for the RFC Editor function is currently provided by the Internet Society.
RFC编辑功能的资金目前由互联网协会提供。