Network Working Group D. Nelson
Request for Comments: 4671 Enterasys Networks
Obsoletes: 2621 August 2006
Category: Informational
Network Working Group D. Nelson
Request for Comments: 4671 Enterasys Networks
Obsoletes: 2621 August 2006
Category: Informational
RADIUS Accounting Server MIB for IPv6
IPv6的RADIUS记帐服务器MIB
Status of This Memo
关于下段备忘
This memo provides information for the Internet community. It does not specify an Internet standard of any kind. Distribution of this memo is unlimited.
本备忘录为互联网社区提供信息。它没有规定任何类型的互联网标准。本备忘录的分发不受限制。
Copyright Notice
版权公告
Copyright (C) The Internet Society (2006).
版权所有（C）互联网协会（2006年）。
Abstract
摘要
This memo defines a set of extensions that instrument RADIUS accounting server functions. These extensions represent a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. Using these extensions, IP-based management stations can manage RADIUS accounting servers.
此备忘录定义了一组用于instrument RADIUS accounting server功能的扩展。这些扩展代表管理信息库（MIB）的一部分，用于Internet社区中的网络管理协议。使用这些扩展，基于IP的管理站可以管理RADIUS记帐服务器。
This memo obsoletes RFC 2621 by deprecating the MIB table containing IPv4-only address formats and defining a new table to add support for version-neutral IP address formats. The remaining MIB objects from RFC 2621 are carried forward into this document. This memo also adds UNITS and REFERENCE clauses to selected objects.
此备忘录通过弃用包含仅IPv4地址格式的MIB表，并定义新表以添加对版本无关IP地址格式的支持，淘汰了RFC 2621。RFC 2621中剩余的MIB对象将转入本文档。此备忘录还向选定对象添加单位和引用子句。
Table of Contents
目录
1. Introduction ....................................................3
2. Terminology .....................................................3
3. The Internet-Standard Management Framework ......................3
4. Scope of Changes ................................................3
5. Structure of the MIB Module .....................................4
6. Deprecated Objects ..............................................5
7. Definitions .....................................................5
8. Security Considerations ........................................20
9. References .....................................................22
9.1. Normative References ......................................22
9.2. Informative References ....................................22
Appendix A. Acknowledgements ......................................23
1. Introduction ....................................................3
2. Terminology .....................................................3
3. The Internet-Standard Management Framework ......................3
4. Scope of Changes ................................................3
5. Structure of the MIB Module .....................................4
6. Deprecated Objects ..............................................5
7. Definitions .....................................................5
8. Security Considerations ........................................20
9. References .....................................................22
9.1. Normative References ......................................22
9.2. Informative References ....................................22
Appendix A. Acknowledgements ......................................23
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. The objects defined within this memo relate to the Remote Authentication Dial-In User Service (RADIUS) Accounting Server as defined in RFC 2866 [RFC2866].
此备忘录定义了管理信息库（MIB）的一部分，用于Internet社区中的网络管理协议。此备忘录中定义的对象与RFC 2866[RFC2866]中定义的远程身份验证拨入用户服务（RADIUS）记帐服务器有关。
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119].
本文件中的关键词“必须”、“不得”、“要求”、“应”、“不应”、“应”、“不应”、“建议”、“可”和“可选”应按照RFC 2119[RFC2119]中所述进行解释。
This document uses terminology from RFC 2865 [RFC2865] and RFC 2866 [RFC2866].
本文件使用RFC 2865[RFC2865]和RFC 2866[RFC2866]中的术语。
This document uses the word "malformed" with respect to RADIUS packets, particularly in the context of counters of "malformed packets". While RFC 2866 does not provide an explicit definition of "malformed", malformed generally means that the implementation has determined the packet does not match the format defined in RFC 2866. Those implementations are used in deployments today, and thus set the de facto definition of "malformed".
本文档对RADIUS数据包使用“格式错误”一词，尤其是在“格式错误数据包”的计数器上下文中。虽然RFC 2866没有提供“格式错误”的明确定义，但格式错误通常意味着实现已确定数据包与RFC 2866中定义的格式不匹配。这些实现在今天的部署中使用，因此设置了“畸形”的事实定义。
For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [RFC3410].
有关描述当前互联网标准管理框架的文件的详细概述，请参阅RFC 3410[RFC3410]第7节。
Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580].
托管对象通过虚拟信息存储（称为管理信息库或MIB）进行访问。MIB对象通常通过简单网络管理协议（SNMP）进行访问。MIB中的对象是使用管理信息结构（SMI）中定义的机制定义的。本备忘录规定了符合SMIv2的MIB模块，如STD 58、RFC 2578[RFC2578]、STD 58、RFC 2579[RFC2579]和STD 58、RFC 2580[RFC2580]所述。
This document obsoletes RFC 2621 [RFC2621], RADIUS Accounting Server MIB, by deprecating the radiusAccClientTable table and adding a new table, radiusAccClientExtTable, containing radiusAccClientInetAddressType and radiusAccClientInetAddress. The purpose of these added MIB objects is to support version-neutral IP addressing formats. The existing table containing
本文档通过弃用radiusAccClientTable表并添加一个新表radiusAccClientExtTable（包含RADIUSACCClientNetAddressType和RADIUSACCClientNetAddress），淘汰了RADIUS记帐服务器MIB RFC 2621[RFC2621]。这些添加的MIB对象的目的是支持版本无关的IP寻址格式。包含以下内容的现有表：
radiusAccClientAddress is deprecated. The remaining MIB objects from RFC 2621 are carried forward into this document. This memo also adds UNITS and REFERENCE clauses to selected objects.
RadiusacclientAddress已弃用。RFC 2621中剩余的MIB对象将转入本文档。此备忘录还向选定对象添加单位和引用子句。
RFC 4001 [RFC4001], which defines the SMI Textual Conventions for version-neutral IP addresses, contains the following recommendation.
RFC 4001[RFC4001]定义了版本无关IP地址的SMI文本约定，其中包含以下建议。
'In particular, when revising a MIB module that contains IPv4 specific tables, it is suggested to define new tables using the textual conventions defined in this memo [RFC4001] that support all versions of IP. The status of the new tables SHOULD be "current", whereas the status of the old IP version specific tables SHOULD be changed to "deprecated". The other approach, of having multiple similar tables for different IP versions, is strongly discouraged.'
'特别是，当修改包含IPv4特定表的MIB模块时，建议使用本备忘录[RFC4001]中定义的支持所有IP版本的文本约定定义新表。新表的状态应为“当前”，而旧IP版本特定表的状态应更改为“已弃用”。另一种方法是为不同的IP版本提供多个类似的表，这是强烈反对的。”
The RADIUS accounting protocol, described in RFC 2866 [RFC2866], distinguishes between the client function and the server function. In RADIUS accounting, clients send Accounting-Requests, and servers reply with Accounting-Responses. Typically, Network Access Server (NAS) devices implement the client function, and thus would be expected to implement the RADIUS accounting client MIB, while RADIUS accounting servers implement the server function, and thus would be expected to implement the RADIUS accounting server MIB.
RFC 2866[RFC2866]中描述的RADIUS记帐协议区分了客户端功能和服务器功能。在RADIUS记帐中，客户端发送记帐请求，服务器用记帐响应进行答复。通常，网络访问服务器（NAS）设备实现客户端功能，因此预期将实现RADIUS记帐客户端MIB，而RADIUS记帐服务器实现服务器功能，因此预期将实现RADIUS记帐服务器MIB。
However, it is possible for a RADIUS accounting entity to perform both client and server functions. For example, a RADIUS proxy may act as a server to one or more RADIUS accounting clients, while simultaneously acting as an accounting client to one or more accounting servers. In such situations, it is expected that RADIUS entities combining client and server functionality will support both the client and server MIBs. The server MIB is defined in this document, and the client MIB is defined in [RFC4670].
但是，RADIUS记帐实体可以同时执行客户端和服务器功能。例如，RADIUS代理可以充当一个或多个RADIUS记帐客户端的服务器，同时充当一个或多个记帐服务器的记帐客户端。在这种情况下，结合客户端和服务器功能的RADIUS实体预计将同时支持客户端和服务器MIB。服务器MIB在本文档中定义，客户端MIB在[RFC4670]中定义。
This MIB module contains thirteen scalars as well as a single table, the RADIUS Accounting Client Table, which contains one row for each RADIUS accounting client with which the server shares a secret. Each entry in the RADIUS Accounting Client Table includes twelve columns presenting a view of the activity of the RADIUS accounting server.
此MIB模块包含十三个标量以及一个表，即RADIUS Accounting Client表，该表包含服务器共享机密的每个RADIUS Accounting Client的一行。RADIUS Accounting Client表中的每个条目包括十二列，显示RADIUS Accounting server活动的视图。
This MIB imports from [RFC2578], [RFC2580], [RFC3411], and [RFC4001].
此MIB从[RFC2578]、[RFC2580]、[RFC3411]和[RFC4001]导入。
The deprecated table in this MIB is carried forward from RFC 2621 [RFC2621]. There are two conditions under which it MAY be desirable for managed entities to continue to support the deprecated table:
此MIB中不推荐使用的表从RFC 2621[RFC2621]结转。在两种情况下，托管实体可能需要继续支持不推荐使用的表：
1. The managed entity only supports IPv4 address formats.
1. 托管实体仅支持IPv4地址格式。
2. The managed entity supports both IPv4 and IPv6 address formats, and the deprecated table is supported for backwards compatibility with older management stations. This option SHOULD only be used when the IP addresses in the new table are in IPv4 format and can accurately be represented in both the new table and the deprecated table.
2. 受管实体支持IPv4和IPv6地址格式，不推荐使用的表支持与旧的管理站向后兼容。仅当新表中的IP地址为IPv4格式并且可以在新表和弃用表中准确表示时，才应使用此选项。
Managed entities SHOULD NOT instantiate row entries in the deprecated table, containing IPv4-only address objects, when the RADIUS accounting client address represented in such a table row is not an IPv4 address. Managed entities SHOULD NOT return inaccurate values of IP address or SNMP object access errors for IPv4-only address objects in otherwise populated tables. When row entries exist in both the deprecated IPv4-only table and the new IP-version-neutral table that describe the same RADIUS accounting client, the row indexes SHOULD be the same for the corresponding rows in each table, to facilitate correlation of these related rows by management applications.
当表行中表示的RADIUS记帐客户端地址不是IPv4地址时，托管实体不应实例化不推荐使用的表中的行条目，该表仅包含IPv4地址对象。对于以其他方式填充的表中仅IPv4地址对象，托管实体不应返回不准确的IP地址值或SNMP对象访问错误。当不推荐的仅IPv4表和描述同一RADIUS记帐客户端的新IP版本中立表中都存在行条目时，每个表中对应行的行索引应相同，以便于管理应用程序关联这些相关行。
RADIUS-ACC-SERVER-MIB DEFINITIONS ::= BEGIN
RADIUS-ACC-SERVER-MIB DEFINITIONS ::= BEGIN
IMPORTS MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Counter32, Integer32, IpAddress, TimeTicks, mib-2 FROM SNMPv2-SMI SnmpAdminString FROM SNMP-FRAMEWORK-MIB InetAddressType, InetAddress FROM INET-ADDRESS-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF;
从SNMPv2 SMI导入模块标识、对象类型、对象标识、计数器32、整数32、IpAddress、时间标记、mib-2从SNMP-FRAMEWORK-mib InetAddressType导入SNMPAdministring，从INET-ADDRESS-mib MODULE-COMPLIANCE导入InetAddress，从SNMPv2 CONF导入对象组；
radiusAccServMIB MODULE-IDENTITY LAST-UPDATED "200608210000Z" -- 21 August 2006 ORGANIZATION "IETF RADIUS Extensions Working Group." CONTACT-INFO " Bernard Aboba Microsoft One Microsoft Way Redmond, WA 98052 US
radiusAccServMIB模块标识最后一次更新“2006082100Z”--2006年8月21日组织“IETF RADIUS扩展工作组”。联系方式“Bernard Aboba Microsoft One Microsoft Way Redmond，WA 98052美国
Phone: +1 425 936 6605
EMail: bernarda@microsoft.com"
DESCRIPTION
"The MIB module for entities implementing the server
side of the Remote Authentication Dial-In User
Service (RADIUS) accounting protocol. Copyright (C)
The Internet Society (2006). This version of this
MIB module is part of RFC 4671; see the RFC itself
for full legal notices."
REVISION "200608210000Z" -- 21 August 2006
DESCRIPTION
"Revised version as published in RFC 4671. This
version obsoletes that of RFC 2621 by deprecating
the MIB table containing IPv4-only address formats
and defining a new table to add support for version-
neutral IP address formats. The remaining MIB objects
from RFC 2621 are carried forward into this version."
REVISION "199906110000Z" -- 11 Jun 1999
DESCRIPTION "Initial version as published in RFC 2621."
::= { radiusAccounting 1 }
Phone: +1 425 936 6605
EMail: bernarda@microsoft.com"
DESCRIPTION
"The MIB module for entities implementing the server
side of the Remote Authentication Dial-In User
Service (RADIUS) accounting protocol. Copyright (C)
The Internet Society (2006). This version of this
MIB module is part of RFC 4671; see the RFC itself
for full legal notices."
REVISION "200608210000Z" -- 21 August 2006
DESCRIPTION
"Revised version as published in RFC 4671. This
version obsoletes that of RFC 2621 by deprecating
the MIB table containing IPv4-only address formats
and defining a new table to add support for version-
neutral IP address formats. The remaining MIB objects
from RFC 2621 are carried forward into this version."
REVISION "199906110000Z" -- 11 Jun 1999
DESCRIPTION "Initial version as published in RFC 2621."
::= { radiusAccounting 1 }
radiusMIB OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The OID assigned to RADIUS MIB work by the IANA."
::= { mib-2 67 }
radiusMIB OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The OID assigned to RADIUS MIB work by the IANA."
::= { mib-2 67 }
radiusAccounting OBJECT IDENTIFIER ::= {radiusMIB 2}
radiusAccounting OBJECT IDENTIFIER ::= {radiusMIB 2}
radiusAccServMIBObjects OBJECT IDENTIFIER
::= { radiusAccServMIB 1 }
radiusAccServMIBObjects OBJECT IDENTIFIER
::= { radiusAccServMIB 1 }
radiusAccServ OBJECT IDENTIFIER
::= { radiusAccServMIBObjects 1 }
radiusAccServ OBJECT IDENTIFIER
::= { radiusAccServMIBObjects 1 }
radiusAccServIdent OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The implementation identification string for the
RADIUS accounting server software in use on the
system, for example, 'FNS-2.1'."
::= {radiusAccServ 1}
radiusAccServIdent OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The implementation identification string for the
RADIUS accounting server software in use on the
system, for example, 'FNS-2.1'."
::= {radiusAccServ 1}
radiusAccServUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only
RadiusaccservTime对象类型语法TimeTicks MAX-ACCESS只读
STATUS current
DESCRIPTION
"If the server has a persistent state (e.g., a
process), this value will be the time elapsed (in
hundredths of a second) since the server process was
started. For software without persistent state, this
value will be zero."
::= {radiusAccServ 2}
STATUS current
DESCRIPTION
"If the server has a persistent state (e.g., a
process), this value will be the time elapsed (in
hundredths of a second) since the server process was
started. For software without persistent state, this
value will be zero."
::= {radiusAccServ 2}
radiusAccServResetTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the server has a persistent state (e.g., a process)
and supports a 'reset' operation (e.g., can be told to
re-read configuration files), this value will be the
time elapsed (in hundredths of a second) since the
server was 'reset.' For software that does not
have persistence or does not support a 'reset'
operation, this value will be zero."
::= {radiusAccServ 3}
radiusAccServResetTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the server has a persistent state (e.g., a process)
and supports a 'reset' operation (e.g., can be told to
re-read configuration files), this value will be the
time elapsed (in hundredths of a second) since the
server was 'reset.' For software that does not
have persistence or does not support a 'reset'
operation, this value will be zero."
::= {radiusAccServ 3}
radiusAccServConfigReset OBJECT-TYPE
SYNTAX INTEGER { other(1),
reset(2),
initializing(3),
running(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status/action object to reinitialize any persistent
server state. When set to reset(2), any persistent
server state (such as a process) is reinitialized as
if the server had just been started. This value will
never be returned by a read operation. When read,
one of the following values will be returned:
other(1) - server in some unknown state;
initializing(3) - server (re)initializing;
running(4) - server currently running."
::= {radiusAccServ 4}
radiusAccServConfigReset OBJECT-TYPE
SYNTAX INTEGER { other(1),
reset(2),
initializing(3),
running(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status/action object to reinitialize any persistent
server state. When set to reset(2), any persistent
server state (such as a process) is reinitialized as
if the server had just been started. This value will
never be returned by a read operation. When read,
one of the following values will be returned:
other(1) - server in some unknown state;
initializing(3) - server (re)initializing;
running(4) - server currently running."
::= {radiusAccServ 4}
radiusAccServTotalRequests OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION
radiusAccServTotalRequests对象类型语法计数器32个单元“数据包”最大访问只读状态当前说明
"The number of packets received on the
accounting port."
REFERENCE "RFC 2866 section 4.1"
::= { radiusAccServ 5 }
"The number of packets received on the
accounting port."
REFERENCE "RFC 2866 section 4.1"
::= { radiusAccServ 5 }
radiusAccServTotalInvalidRequests OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Accounting-Request packets
received from unknown addresses."
REFERENCE "RFC 2866 sections 2, 4.1"
::= { radiusAccServ 6 }
radiusAccServTotalInvalidRequests OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Accounting-Request packets
received from unknown addresses."
REFERENCE "RFC 2866 sections 2, 4.1"
::= { radiusAccServ 6 }
radiusAccServTotalDupRequests OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of duplicate RADIUS Accounting-Request
packets received."
REFERENCE "RFC 2866 section 4.1"
::= { radiusAccServ 7 }
radiusAccServTotalDupRequests OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of duplicate RADIUS Accounting-Request
packets received."
REFERENCE "RFC 2866 section 4.1"
::= { radiusAccServ 7 }
radiusAccServTotalResponses OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Accounting-Response packets
sent."
REFERENCE "RFC 2866 section 4.2"
::= { radiusAccServ 8 }
radiusAccServTotalResponses OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Accounting-Response packets
sent."
REFERENCE "RFC 2866 section 4.2"
::= { radiusAccServ 8 }
radiusAccServTotalMalformedRequests OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed RADIUS Accounting-Request packets received. Bad authenticators or unknown types are not included as malformed Access-Requests." REFERENCE "RFC 2866 section 3"
radiusAccServTotalMalformedRequests对象类型语法计数器32个单位“数据包”MAX-ACCESS只读状态当前描述“收到的格式错误的RADIUS记帐请求数据包的数量。错误的身份验证程序或未知类型不包括在格式错误的访问请求中。”参考“RFC 2866第3节”
::= { radiusAccServ 9 }
::= { radiusAccServ 9 }
radiusAccServTotalBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Accounting-Request packets
that contained an invalid authenticator."
REFERENCE "RFC 2866 section 3"
::= { radiusAccServ 10 }
radiusAccServTotalBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Accounting-Request packets
that contained an invalid authenticator."
REFERENCE "RFC 2866 section 3"
::= { radiusAccServ 10 }
radiusAccServTotalPacketsDropped OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming packets silently discarded
for a reason other than malformed, bad authenticators,
or unknown types."
REFERENCE "RFC 2866 section 3"
::= { radiusAccServ 11 }
radiusAccServTotalPacketsDropped OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming packets silently discarded
for a reason other than malformed, bad authenticators,
or unknown types."
REFERENCE "RFC 2866 section 3"
::= { radiusAccServ 11 }
radiusAccServTotalNoRecords OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Accounting-Request packets
that were received and responded to but not
recorded."
::= { radiusAccServ 12 }
radiusAccServTotalNoRecords OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Accounting-Request packets
that were received and responded to but not
recorded."
::= { radiusAccServ 12 }
radiusAccServTotalUnknownTypes OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets of unknown type that
were received."
REFERENCE "RFC 2866 section 4"
::= { radiusAccServ 13 }
radiusAccServTotalUnknownTypes OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets of unknown type that
were received."
REFERENCE "RFC 2866 section 4"
::= { radiusAccServ 13 }
radiusAccClientTable OBJECT-TYPE
radiusAccClientTable对象类型
SYNTAX SEQUENCE OF RadiusAccClientEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The (conceptual) table listing the RADIUS accounting
clients with which the server shares a secret."
::= { radiusAccServ 14 }
SYNTAX SEQUENCE OF RadiusAccClientEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The (conceptual) table listing the RADIUS accounting
clients with which the server shares a secret."
::= { radiusAccServ 14 }
radiusAccClientEntry OBJECT-TYPE
SYNTAX RadiusAccClientEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry (conceptual row) representing a RADIUS
accounting client with which the server shares a
secret."
INDEX { radiusAccClientIndex }
::= { radiusAccClientTable 1 }
radiusAccClientEntry OBJECT-TYPE
SYNTAX RadiusAccClientEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry (conceptual row) representing a RADIUS
accounting client with which the server shares a
secret."
INDEX { radiusAccClientIndex }
::= { radiusAccClientTable 1 }
RadiusAccClientEntry ::= SEQUENCE {
radiusAccClientIndex Integer32,
radiusAccClientAddress IpAddress,
radiusAccClientID SnmpAdminString,
radiusAccServPacketsDropped Counter32,
radiusAccServRequests Counter32,
radiusAccServDupRequests Counter32,
radiusAccServResponses Counter32,
radiusAccServBadAuthenticators Counter32,
radiusAccServMalformedRequests Counter32,
radiusAccServNoRecords Counter32,
radiusAccServUnknownTypes Counter32
}
RadiusAccClientEntry ::= SEQUENCE {
radiusAccClientIndex Integer32,
radiusAccClientAddress IpAddress,
radiusAccClientID SnmpAdminString,
radiusAccServPacketsDropped Counter32,
radiusAccServRequests Counter32,
radiusAccServDupRequests Counter32,
radiusAccServResponses Counter32,
radiusAccServBadAuthenticators Counter32,
radiusAccServMalformedRequests Counter32,
radiusAccServNoRecords Counter32,
radiusAccServUnknownTypes Counter32
}
radiusAccClientIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A number uniquely identifying each RADIUS accounting
client with which this server communicates."
::= { radiusAccClientEntry 1 }
radiusAccClientIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A number uniquely identifying each RADIUS accounting
client with which this server communicates."
::= { radiusAccClientEntry 1 }
radiusAccClientAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The NAS-IP-Address of the RADIUS accounting client
radiusAccClientAddress对象类型语法IpAddress MAX-ACCESS只读状态不推荐使用说明“RADIUS记帐客户端的NAS IP地址
referred to in this table entry."
::= { radiusAccClientEntry 2 }
referred to in this table entry."
::= { radiusAccClientEntry 2 }
radiusAccClientID OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The NAS-Identifier of the RADIUS accounting client
referred to in this table entry. This is not
necessarily the same as sysName in MIB II."
REFERENCE "RFC 2865 section 5.32"
::= { radiusAccClientEntry 3 }
radiusAccClientID OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The NAS-Identifier of the RADIUS accounting client
referred to in this table entry. This is not
necessarily the same as sysName in MIB II."
REFERENCE "RFC 2865 section 5.32"
::= { radiusAccClientEntry 3 }
-- Server Counters
--
-- Requests - DupRequests - BadAuthenticators - MalformedRequests -
-- UnknownTypes - PacketsDropped - Responses = Pending
--
-- Requests - DupRequests - BadAuthenticators - MalformedRequests -
-- UnknownTypes - PacketsDropped - NoRecords = entries logged
-- Server Counters
--
-- Requests - DupRequests - BadAuthenticators - MalformedRequests -
-- UnknownTypes - PacketsDropped - Responses = Pending
--
-- Requests - DupRequests - BadAuthenticators - MalformedRequests -
-- UnknownTypes - PacketsDropped - NoRecords = entries logged
radiusAccServPacketsDropped OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of incoming packets received
from this client and silently discarded
for a reason other than malformed, bad
authenticators, or unknown types."
REFERENCE "RFC 2866 section 3"
::= { radiusAccClientEntry 4 }
radiusAccServPacketsDropped OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of incoming packets received
from this client and silently discarded
for a reason other than malformed, bad
authenticators, or unknown types."
REFERENCE "RFC 2866 section 3"
::= { radiusAccClientEntry 4 }
radiusAccServRequests OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of packets received from this
client on the accounting port."
REFERENCE "RFC 2866 section 4.1"
::= { radiusAccClientEntry 5 }
radiusAccServRequests OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of packets received from this
client on the accounting port."
REFERENCE "RFC 2866 section 4.1"
::= { radiusAccClientEntry 5 }
radiusAccServDupRequests OBJECT-TYPE SYNTAX Counter32
radiusAccServDupRequests对象类型语法计数器32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of duplicate RADIUS Accounting-Request
packets received from this client."
REFERENCE "RFC 2866 section 4.1"
::= { radiusAccClientEntry 6 }
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of duplicate RADIUS Accounting-Request
packets received from this client."
REFERENCE "RFC 2866 section 4.1"
::= { radiusAccClientEntry 6 }
radiusAccServResponses OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of RADIUS Accounting-Response packets
sent to this client."
REFERENCE "RFC 2866 section 4.2"
::= { radiusAccClientEntry 7 }
radiusAccServResponses OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of RADIUS Accounting-Response packets
sent to this client."
REFERENCE "RFC 2866 section 4.2"
::= { radiusAccClientEntry 7 }
radiusAccServBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of RADIUS Accounting-Request packets
that contained invalid authenticators received
from this client."
REFERENCE "RFC 2866 section 3"
::= { radiusAccClientEntry 8 }
radiusAccServBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of RADIUS Accounting-Request packets
that contained invalid authenticators received
from this client."
REFERENCE "RFC 2866 section 3"
::= { radiusAccClientEntry 8 }
radiusAccServMalformedRequests OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of malformed RADIUS Accounting-Request
packets that were received from this client.
Bad authenticators and unknown types
are not included as malformed Accounting-Requests."
REFERENCE "RFC 2866 section 3"
::= { radiusAccClientEntry 9 }
radiusAccServMalformedRequests OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of malformed RADIUS Accounting-Request
packets that were received from this client.
Bad authenticators and unknown types
are not included as malformed Accounting-Requests."
REFERENCE "RFC 2866 section 3"
::= { radiusAccClientEntry 9 }
radiusAccServNoRecords OBJECT-TYPE SYNTAX Counter32 UNITS "packets"
radiusAccServNoRecords对象类型语法计数器32个单位“数据包”
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of RADIUS Accounting-Request packets
that were received and responded to but not
recorded."
::= { radiusAccClientEntry 10 }
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of RADIUS Accounting-Request packets
that were received and responded to but not
recorded."
::= { radiusAccClientEntry 10 }
radiusAccServUnknownTypes OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of RADIUS packets of unknown type that
were received from this client."
REFERENCE "RFC 2866 section 4"
::= { radiusAccClientEntry 11 }
radiusAccServUnknownTypes OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of RADIUS packets of unknown type that
were received from this client."
REFERENCE "RFC 2866 section 4"
::= { radiusAccClientEntry 11 }
-- New MIB objects added in this revision
--此修订版中添加的新MIB对象
radiusAccClientExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusAccClientExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the RADIUS accounting
clients with which the server shares a secret."
::= { radiusAccServ 15 }
radiusAccClientExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusAccClientExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the RADIUS accounting
clients with which the server shares a secret."
::= { radiusAccServ 15 }
radiusAccClientExtEntry OBJECT-TYPE
SYNTAX RadiusAccClientExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a RADIUS
accounting client with which the server shares a
secret."
INDEX { radiusAccClientExtIndex }
::= { radiusAccClientExtTable 1 }
radiusAccClientExtEntry OBJECT-TYPE
SYNTAX RadiusAccClientExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a RADIUS
accounting client with which the server shares a
secret."
INDEX { radiusAccClientExtIndex }
::= { radiusAccClientExtTable 1 }
RadiusAccClientExtEntry ::= SEQUENCE {
radiusAccClientExtIndex Integer32,
radiusAccClientInetAddressType InetAddressType,
radiusAccClientInetAddress InetAddress,
radiusAccClientExtID SnmpAdminString,
radiusAccServExtPacketsDropped Counter32,
RadiusAccClientExtEntry ::= SEQUENCE {
radiusAccClientExtIndex Integer32,
radiusAccClientInetAddressType InetAddressType,
radiusAccClientInetAddress InetAddress,
radiusAccClientExtID SnmpAdminString,
radiusAccServExtPacketsDropped Counter32,
radiusAccServExtRequests Counter32, radiusAccServExtDupRequests Counter32, radiusAccServExtResponses Counter32, radiusAccServExtBadAuthenticators Counter32, radiusAccServExtMalformedRequests Counter32, radiusAccServExtNoRecords Counter32, radiusAccServExtUnknownTypes Counter32, radiusAccServerCounterDiscontinuity TimeTicks }
radiusAccServExtRequests计数器32、radiusAccServExtDupRequests计数器32、radiusAccServExtResponses计数器32、radiusAccServExtBadAuthenticators计数器32、radiusAccServExtMalformedRequests计数器32、radiusAccServExtNoRecords计数器32、RadiusaccserveUnknownTypes计数器32、RadiusaccserveCounterInterruption TimeTicks}
radiusAccClientExtIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying each RADIUS accounting
client with which this server communicates."
::= { radiusAccClientExtEntry 1 }
radiusAccClientExtIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying each RADIUS accounting
client with which this server communicates."
::= { radiusAccClientExtEntry 1 }
radiusAccClientInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of address format used for the
radiusAccClientInetAddress object."
::= { radiusAccClientExtEntry 2 }
radiusAccClientInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of address format used for the
radiusAccClientInetAddress object."
::= { radiusAccClientExtEntry 2 }
radiusAccClientInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the RADIUS accounting
client referred to in this table entry, using
the IPv6 address format."
::= { radiusAccClientExtEntry 3 }
radiusAccClientInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the RADIUS accounting
client referred to in this table entry, using
the IPv6 address format."
::= { radiusAccClientExtEntry 3 }
radiusAccClientExtID OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NAS-Identifier of the RADIUS accounting client
referred to in this table entry. This is not
necessarily the same as sysName in MIB II."
REFERENCE "RFC 2865 section 5.32"
::= { radiusAccClientExtEntry 4 }
radiusAccClientExtID OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NAS-Identifier of the RADIUS accounting client
referred to in this table entry. This is not
necessarily the same as sysName in MIB II."
REFERENCE "RFC 2865 section 5.32"
::= { radiusAccClientExtEntry 4 }
-- Server Counters
--
-- Requests - DupRequests - BadAuthenticators - MalformedRequests -
-- UnknownTypes - PacketsDropped - Responses = Pending
--
-- Requests - DupRequests - BadAuthenticators - MalformedRequests -
-- UnknownTypes - PacketsDropped - NoRecords = entries logged
-- Server Counters
--
-- Requests - DupRequests - BadAuthenticators - MalformedRequests -
-- UnknownTypes - PacketsDropped - Responses = Pending
--
-- Requests - DupRequests - BadAuthenticators - MalformedRequests -
-- UnknownTypes - PacketsDropped - NoRecords = entries logged
radiusAccServExtPacketsDropped OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming packets received from this
client and silently discarded for a reason other
than malformed, bad authenticators, or unknown types.
This counter may experience a discontinuity when the
RADIUS Accounting Server module within the managed
entity is reinitialized, as indicated by the current
value of radiusAccServerCounterDiscontinuity."
REFERENCE "RFC 2866 section 3"
::= { radiusAccClientExtEntry 5 }
radiusAccServExtPacketsDropped OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming packets received from this
client and silently discarded for a reason other
than malformed, bad authenticators, or unknown types.
This counter may experience a discontinuity when the
RADIUS Accounting Server module within the managed
entity is reinitialized, as indicated by the current
value of radiusAccServerCounterDiscontinuity."
REFERENCE "RFC 2866 section 3"
::= { radiusAccClientExtEntry 5 }
radiusAccServExtRequests OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received from this
client on the accounting port. This counter
may experience a discontinuity when the
RADIUS Accounting Server module within the
managed entity is reinitialized, as indicated by
the current value of
radiusAccServerCounterDiscontinuity."
REFERENCE "RFC 2866 section 4.1"
::= { radiusAccClientExtEntry 6 }
radiusAccServExtRequests OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received from this
client on the accounting port. This counter
may experience a discontinuity when the
RADIUS Accounting Server module within the
managed entity is reinitialized, as indicated by
the current value of
radiusAccServerCounterDiscontinuity."
REFERENCE "RFC 2866 section 4.1"
::= { radiusAccClientExtEntry 6 }
radiusAccServExtDupRequests OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of duplicate RADIUS Accounting-Request packets received from this client. This counter
radiusAccServExtDupRequests对象类型语法计数器32个单位“数据包”MAX-ACCESS只读状态当前描述“从此客户端接收的重复RADIUS记帐请求数据包数。此计数器
may experience a discontinuity when the RADIUS
Accounting Server module within the managed
entity is reinitialized, as indicated by the
current value of
radiusAccServerCounterDiscontinuity."
REFERENCE "RFC 2866 section 4.1"
::= { radiusAccClientExtEntry 7 }
may experience a discontinuity when the RADIUS
Accounting Server module within the managed
entity is reinitialized, as indicated by the
current value of
radiusAccServerCounterDiscontinuity."
REFERENCE "RFC 2866 section 4.1"
::= { radiusAccClientExtEntry 7 }
radiusAccServExtResponses OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Accounting-Response packets
sent to this client. This counter may experience
a discontinuity when the RADIUS Accounting Server
module within the managed entity is reinitialized,
as indicated by the current value of
radiusAccServerCounterDiscontinuity."
REFERENCE "RFC 2866 section 4.2"
::= { radiusAccClientExtEntry 8 }
radiusAccServExtResponses OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Accounting-Response packets
sent to this client. This counter may experience
a discontinuity when the RADIUS Accounting Server
module within the managed entity is reinitialized,
as indicated by the current value of
radiusAccServerCounterDiscontinuity."
REFERENCE "RFC 2866 section 4.2"
::= { radiusAccClientExtEntry 8 }
radiusAccServExtBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Accounting-Request packets
that contained invalid authenticators received
from this client. This counter may experience a
discontinuity when the RADIUS Accounting Server
module within the managed entity is reinitialized,
as indicated by the current value of
radiusAccServerCounterDiscontinuity."
REFERENCE "RFC 2866 section 3"
::= { radiusAccClientExtEntry 9 }
radiusAccServExtBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Accounting-Request packets
that contained invalid authenticators received
from this client. This counter may experience a
discontinuity when the RADIUS Accounting Server
module within the managed entity is reinitialized,
as indicated by the current value of
radiusAccServerCounterDiscontinuity."
REFERENCE "RFC 2866 section 3"
::= { radiusAccClientExtEntry 9 }
radiusAccServExtMalformedRequests OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed RADIUS Accounting-Request packets that were received from this client. Bad authenticators and unknown types are not
radiusAccServExtMalformedRequests对象类型语法计数器32个单位“数据包”MAX-ACCESS只读状态当前描述“从此客户端接收的格式错误的RADIUS记帐请求数据包的数量。不支持错误的身份验证程序和未知类型
included as malformed Accounting-Requests. This
counter may experience a discontinuity when the
RADIUS Accounting Server module within the managed
entity is reinitialized, as indicated by the current
value of radiusAccServerCounterDiscontinuity."
REFERENCE "RFC 2866 section 3"
::= { radiusAccClientExtEntry 10 }
included as malformed Accounting-Requests. This
counter may experience a discontinuity when the
RADIUS Accounting Server module within the managed
entity is reinitialized, as indicated by the current
value of radiusAccServerCounterDiscontinuity."
REFERENCE "RFC 2866 section 3"
::= { radiusAccClientExtEntry 10 }
radiusAccServExtNoRecords OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Accounting-Request packets
that were received and responded to but not
recorded. This counter may experience a
discontinuity when the RADIUS Accounting Server
module within the managed entity is reinitialized,
as indicated by the current value of
radiusAccServerCounterDiscontinuity."
::= { radiusAccClientExtEntry 11 }
radiusAccServExtNoRecords OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Accounting-Request packets
that were received and responded to but not
recorded. This counter may experience a
discontinuity when the RADIUS Accounting Server
module within the managed entity is reinitialized,
as indicated by the current value of
radiusAccServerCounterDiscontinuity."
::= { radiusAccClientExtEntry 11 }
radiusAccServExtUnknownTypes OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets of unknown type that
were received from this client. This counter may
experience a discontinuity when the RADIUS Accounting
Server module within the managed entity is
reinitialized, as indicated by the current value of
radiusAccServerCounterDiscontinuity."
REFERENCE "RFC 2866 section 4"
::= { radiusAccClientExtEntry 12 }
radiusAccServExtUnknownTypes OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets of unknown type that
were received from this client. This counter may
experience a discontinuity when the RADIUS Accounting
Server module within the managed entity is
reinitialized, as indicated by the current value of
radiusAccServerCounterDiscontinuity."
REFERENCE "RFC 2866 section 4"
::= { radiusAccClientExtEntry 12 }
radiusAccServerCounterDiscontinuity OBJECT-TYPE SYNTAX TimeTicks UNITS "centiseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of centiseconds since the last discontinuity in the RADIUS Accounting Server counters. A discontinuity may be the result of a reinitialization of the RADIUS Accounting Server
RADIUSACCSERVERCOUNTICITY对象类型语法TimeTicks UNITS“厘秒”MAX-ACCESS只读状态当前描述“自RADIUS记帐服务器计数器上次中断以来的厘秒数。中断可能是RADIUS记帐服务器重新初始化的结果
module within the managed entity."
::= { radiusAccClientExtEntry 13 }
module within the managed entity."
::= { radiusAccClientExtEntry 13 }
-- conformance information
--一致性信息
radiusAccServMIBConformance OBJECT IDENTIFIER
::= { radiusAccServMIB 2 }
radiusAccServMIBConformance OBJECT IDENTIFIER
::= { radiusAccServMIB 2 }
radiusAccServMIBCompliances OBJECT IDENTIFIER
::= { radiusAccServMIBConformance 1 }
radiusAccServMIBCompliances OBJECT IDENTIFIER
::= { radiusAccServMIBConformance 1 }
radiusAccServMIBGroups OBJECT IDENTIFIER
::= { radiusAccServMIBConformance 2 }
radiusAccServMIBGroups OBJECT IDENTIFIER
::= { radiusAccServMIBConformance 2 }
-- compliance statements
--合规声明
radiusAccServMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for accounting servers implementing the RADIUS Accounting Server MIB. Implementation of this module is for IPv4-only entities, or for backwards compatibility use with entities that support both IPv4 and IPv6." MODULE -- this module MANDATORY-GROUPS { radiusAccServMIBGroup }
RADIUSACCServMib COMPLIANCE MODULE-COMPLIANCE STATUS不推荐使用描述“用于实现RADIUS记帐服务器MIB的记帐服务器的符合性声明。此模块的实现仅适用于IPv4实体，或用于与同时支持IPv4和IPv6的实体的向后兼容性使用。”MODULE——此模块为强制组{radiusAccServMIBGroup}
OBJECT radiusAccServConfigReset WRITE-SYNTAX INTEGER { reset(2) } DESCRIPTION "The only SETable value is 'reset' (2)."
OBJECT radiusAccServConfigReset WRITE-SYNTAX整数{reset（2）}说明“唯一可设置的值是'reset'（2）。”
::= { radiusAccServMIBCompliances 1 }
::= { radiusAccServMIBCompliances 1 }
radiusAccServExtMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for accounting servers implementing the RADIUS Accounting Server IPv6 Extensions MIB. Implementation of this module is for entities that support IPv6, or support IPv4 and IPv6." MODULE -- this module MANDATORY-GROUPS { radiusAccServExtMIBGroup }
RADIUSACCSERVEXTMIB COMPLIANCE MODULE-COMPLIANCE STATUS current DESCRIPTION“用于实现RADIUS accounting Server IPv6 Extensions MIB的记帐服务器的符合性声明。此模块的实现适用于支持IPv6或支持IPv4和IPv6的实体。”模块--此模块为必填项-组{RADIUSACCSERVEXTMIBGOUP}
OBJECT radiusAccServConfigReset WRITE-SYNTAX INTEGER { reset(2) }
对象radiusAccServConfigReset写入语法整数{reset（2）}
DESCRIPTION "The only SETable value is 'reset' (2)."
说明“唯一可设置的值为‘重置’（2）。”
OBJECT radiusAccClientInetAddressType SYNTAX InetAddressType { ipv4(1), ipv6(2) } DESCRIPTION "An implementation is only required to support IPv4 and globally unique IPv6 addresses."
OBJECT RadiusaccClientNetAddressType语法InetAddressType{ipv4（1），ipv6（2）}说明“仅支持ipv4和全局唯一ipv6地址才需要实现。”
OBJECT radiusAccClientInetAddress SYNTAX InetAddress ( SIZE (4|16) ) DESCRIPTION "An implementation is only required to support IPv4 and globally unique IPv6 addresses."
OBJECT radiusAccClientInetAddress语法InetAddress（大小（4 | 16））DESCRIPTION“只需要一个实现来支持IPv4和全局唯一的IPv6地址。”
::= { radiusAccServMIBCompliances 2 }
::= { radiusAccServMIBCompliances 2 }
-- units of conformance
--一致性单位
radiusAccServMIBGroup OBJECT-GROUP OBJECTS {radiusAccServIdent, radiusAccServUpTime, radiusAccServResetTime, radiusAccServConfigReset, radiusAccServTotalRequests, radiusAccServTotalInvalidRequests, radiusAccServTotalDupRequests, radiusAccServTotalResponses, radiusAccServTotalMalformedRequests, radiusAccServTotalBadAuthenticators, radiusAccServTotalPacketsDropped, radiusAccServTotalNoRecords, radiusAccServTotalUnknownTypes, radiusAccClientAddress, radiusAccClientID, radiusAccServPacketsDropped, radiusAccServRequests, radiusAccServDupRequests, radiusAccServResponses, radiusAccServBadAuthenticators, radiusAccServMalformedRequests, radiusAccServNoRecords, radiusAccServUnknownTypes } STATUS deprecated DESCRIPTION "The collection of objects providing management of a RADIUS Accounting Server."
radiusAccServMIBGroup对象组对象{radiusaccservant、radiusAccServUpTime、radiusAccServResetTime、radiusAccServConfigReset、radiusAccServTotalRequests、radiusAccServTotalInvalidRequests、radiusAccServTotalDupRequests、radiusAccServTotalResponses、radiusAccServTotalMalformedRequests、radiusAccServTotalBadAuthenticators、radiusAccServTotalPacketsDropped、radiusAccServTotalNoRecords、 radiusAccServTotalUnknownTypes，radiusAccClientAddress，radiusAccClientID，radiusAccServPacketsDropped，radiusAccServRequests，radiusAccServDupRequests，radiusAccServResponses，radiusAccServBadAuthenticators，radiusAccServMalformedRequests，radiusAccServNoRecords，radiusAccServUnknownTypes}状态不推荐说明“提供RADIUS记帐服务器管理的对象集合。”
::= { radiusAccServMIBGroups 1 }
::= { radiusAccServMIBGroups 1 }
radiusAccServExtMIBGroup OBJECT-GROUP
OBJECTS {radiusAccServIdent,
radiusAccServUpTime,
radiusAccServResetTime,
radiusAccServConfigReset,
radiusAccServTotalRequests,
radiusAccServTotalInvalidRequests,
radiusAccServTotalDupRequests,
radiusAccServTotalResponses,
radiusAccServTotalMalformedRequests,
radiusAccServTotalBadAuthenticators,
radiusAccServTotalPacketsDropped,
radiusAccServTotalNoRecords,
radiusAccServTotalUnknownTypes,
radiusAccClientInetAddressType,
radiusAccClientInetAddress,
radiusAccClientExtID,
radiusAccServExtPacketsDropped,
radiusAccServExtRequests,
radiusAccServExtDupRequests,
radiusAccServExtResponses,
radiusAccServExtBadAuthenticators,
radiusAccServExtMalformedRequests,
radiusAccServExtNoRecords,
radiusAccServExtUnknownTypes,
radiusAccServerCounterDiscontinuity
}
STATUS current
DESCRIPTION
"The collection of objects providing management of
a RADIUS Accounting Server."
::= { radiusAccServMIBGroups 2 }
radiusAccServExtMIBGroup OBJECT-GROUP
OBJECTS {radiusAccServIdent,
radiusAccServUpTime,
radiusAccServResetTime,
radiusAccServConfigReset,
radiusAccServTotalRequests,
radiusAccServTotalInvalidRequests,
radiusAccServTotalDupRequests,
radiusAccServTotalResponses,
radiusAccServTotalMalformedRequests,
radiusAccServTotalBadAuthenticators,
radiusAccServTotalPacketsDropped,
radiusAccServTotalNoRecords,
radiusAccServTotalUnknownTypes,
radiusAccClientInetAddressType,
radiusAccClientInetAddress,
radiusAccClientExtID,
radiusAccServExtPacketsDropped,
radiusAccServExtRequests,
radiusAccServExtDupRequests,
radiusAccServExtResponses,
radiusAccServExtBadAuthenticators,
radiusAccServExtMalformedRequests,
radiusAccServExtNoRecords,
radiusAccServExtUnknownTypes,
radiusAccServerCounterDiscontinuity
}
STATUS current
DESCRIPTION
"The collection of objects providing management of
a RADIUS Accounting Server."
::= { radiusAccServMIBGroups 2 }
END
终止
There are management objects (radiusAccServConfigReset) defined in this MIB that have a MAX-ACCESS clause of read-write and/or read-create. Such objects may be considered sensitive or vulnerable in some network environments. The support for SET operations in a non-secure environment without proper protection can have a negative effect on network operations. These are:
此MIB中定义的管理对象（radiusAccServConfigReset）具有读写和/或读创建的MAX-ACCESS子句。在某些网络环境中，此类对象可能被视为敏感或易受攻击。在没有适当保护的非安全环境中支持SET操作可能会对网络操作产生负面影响。这些是：
radiusAccServConfigReset This object can be used to reinitialize the persistent state of any server. When set to reset(2), any persistent server state (such as a process) is reinitialized as if the server had just been started. Depending on the server implementation details, this action may or may not interrupt the processing of pending request in the server. Abuse of this object may lead to a Denial of Service attack on the server.
radiusAccServConfigReset此对象可用于重新初始化任何服务器的持久状态。当设置为reset（2）时，将重新初始化任何持久服务器状态（如进程），就像服务器刚刚启动一样。根据服务器实现的详细信息，此操作可能会也可能不会中断服务器中挂起请求的处理。滥用此对象可能会导致服务器上发生拒绝服务攻击。
There are a number of managed objects in this MIB that may contain sensitive information. These are:
此MIB中有许多托管对象可能包含敏感信息。这些是：
radiusAccClientIPAddress This can be used to determine the address of the RADIUS accounting client with which the server is communicating. This information could be useful in mounting an attack on the accounting client.
RADIUSACCCLIENTIPDRESS可用于确定服务器与之通信的RADIUS记帐客户端的地址。此信息可能有助于对记帐客户端发起攻击。
radiusAccClientInetAddress This can be used to determine the address of the RADIUS accounting client with which the server is communicating. This information could be useful in mounting an attack on the accounting client.
RADIUSACCClientNetAddress可用于确定服务器与之通信的RADIUS记帐客户端的地址。此信息可能有助于对记帐客户端发起攻击。
It is thus important to control even GET access to these objects and possibly to even encrypt the values of these object when sending them over the network via SNMP. Not all versions of SNMP provide features for such a secure environment.
因此，在通过SNMP通过网络发送这些对象时，控制甚至访问这些对象，甚至可能加密这些对象的值，这一点非常重要。并非所有版本的SNMP都为这种安全环境提供功能。
SNMP versions prior to SNMPv3 do not provide a secure environment. Even if the network itself is secure (for example by using IPsec), there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB.
SNMPv3之前的SNMP版本不提供安全环境。即使网络本身是安全的（例如通过使用IPsec），也无法控制安全网络上的谁可以访问和获取/设置（读取/更改/创建/删除）此MIB中的对象。
It is RECOMMENDED that implementers consider the security features as provided by the SNMPv3 framework (see [RFC3410], section 8), including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy).
建议实施者考虑SNMPv3框架所提供的安全特性（参见[RCFC310]，第8节），包括对SNMPv3加密机制的完全支持（用于身份验证和隐私）。
Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of this MIB module is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them.
此外，不建议部署SNMPv3之前的SNMP版本。相反，建议部署SNMPv3并启用加密安全性。然后，客户/运营商应负责确保授予访问此MIB模块实例权限的SNMP实体已正确配置为仅授予那些拥有确实获取或设置（更改/创建/删除）对象的合法权限的主体（用户）访问对象。
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2119]Bradner，S.，“RFC中用于表示需求水平的关键词”，BCP 14，RFC 2119，1997年3月。
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2578]McCloghrie，K.，Ed.，Perkins，D.，Ed.，和J.Schoenwaeld，Ed.“管理信息的结构版本2（SMIv2）”，STD 58，RFC 2578，1999年4月。
[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999.
[RFC2579]McCloghrie，K.，Ed.，Perkins，D.，Ed.，和J.Schoenwaeld，Ed.“SMIv2的文本约定”，STD 58，RFC 2579，1999年4月。
[RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999.
[RFC2580]McCloghrie，K.，Perkins，D.，和J.Schoenwaeld，“SMIv2的一致性声明”，STD 58，RFC 25801999年4月。
[RFC2866] Rigney, C., "RADIUS Accounting", RFC 2866, June 2000.
[RFC2866]Rigney，C.，“半径会计”，RFC 28662000年6月。
[RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture for Describing Simple Network Management Protocol (SNMP) Management Frameworks", STD 62, RFC 3411, December 2002.
[RFC3411]Harrington，D.，Presohn，R.，和B.Wijnen，“描述简单网络管理协议（SNMP）管理框架的体系结构”，STD 62，RFC 3411，2002年12月。
[RFC4001] Daniele, M., Haberman, B., Routhier, S., and J. Schoenwaelder, "Textual Conventions for Internet Network Addresses", RFC 4001, February 2005.
[RFC4001]Daniele，M.，Haberman，B.，Routhier，S.，和J.Schoenwaeld，“互联网网络地址的文本约定”，RFC 4001，2005年2月。
[RFC2621] Zorn, G. and B. Aboba, "RADIUS Accounting Server MIB", RFC 2621, June 1999.
[RFC2621]Zorn，G.和B.Aboba，“RADIUS记帐服务器MIB”，RFC 26211999年6月。
[RFC2865] Rigney, C., Willens, S., Rubens, A., and W. Simpson, "Remote Authentication Dial In User Service (RADIUS)", RFC 2865, June 2000.
[RFC2865]Rigney，C.，Willens，S.，Rubens，A.，和W.Simpson，“远程认证拨入用户服务（RADIUS）”，RFC 28652000年6月。
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction and Applicability Statements for Internet-Standard Management Framework", RFC 3410, December 2002.
[RFC3410]Case，J.，Mundy，R.，Partain，D.，和B.Stewart，“互联网标准管理框架的介绍和适用性声明”，RFC 34102002年12月。
[RFC4670] Nelson, D., "RADIUS Accounting Client MIB for IPv6", RFC 4670, August 2006.
[RFC4670]Nelson，D.，“IPv6的RADIUS计费客户端MIB”，RFC 46702006年8月。
The authors of the original MIB are Bernard Aboba and Glen Zorn.
原始MIB的作者是Bernard Aboba和Glen Zorn。
Many thanks to all reviewers, especially to Dave Harrington, Dan Romascanu, C.M. Heard, Bruno Pape, Greg Weber, and Bert Wijnen.
非常感谢所有评论家，特别是戴夫·哈林顿、丹·罗马斯坎努、C.M.赫德、布鲁诺·帕普、格雷格·韦伯和伯特·维恩。
Author's Address
作者地址
David B. Nelson Enterasys Networks 50 Minuteman Road Andover, MA 01810 USA
David B.Nelson Enterasys Networks美国马萨诸塞州安多弗市Minuteman路50号01810
EMail: dnelson@enterasys.com
EMail: dnelson@enterasys.com
Full Copyright Statement
完整版权声明
Copyright (C) The Internet Society (2006).
版权所有（C）互联网协会（2006年）。
This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.
本文件受BCP 78中包含的权利、许可和限制的约束，除其中规定外，作者保留其所有权利。
This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
本文件及其包含的信息是按“原样”提供的，贡献者、他/她所代表或赞助的组织（如有）、互联网协会和互联网工程任务组不承担任何明示或暗示的担保，包括但不限于任何保证，即使用本文中的信息不会侵犯任何权利，或对适销性或特定用途适用性的任何默示保证。
Intellectual Property
知识产权
The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79.
IETF对可能声称与本文件所述技术的实施或使用有关的任何知识产权或其他权利的有效性或范围，或此类权利下的任何许可可能或可能不可用的程度，不采取任何立场；它也不表示它已作出任何独立努力来确定任何此类权利。有关RFC文件中权利的程序信息，请参见BCP 78和BCP 79。
Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr.
向IETF秘书处披露的知识产权副本和任何许可证保证，或本规范实施者或用户试图获得使用此类专有权利的一般许可证或许可的结果，可从IETF在线知识产权存储库获取，网址为http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org.
IETF邀请任何相关方提请其注意任何版权、专利或专利申请，或其他可能涵盖实施本标准所需技术的专有权利。请将信息发送至IETF的IETF-ipr@ietf.org.
Acknowledgement
确认
Funding for the RFC Editor function is provided by the IETF Administrative Support Activity (IASA).
RFC编辑器功能的资金由IETF行政支持活动（IASA）提供。