Network Working Group C. DeSanti
Request for Comments: 4438 V. Gaonkar
Category: Standards Track H.K. Vivek
K. McCloghrie
Cisco Systems
S. Gai
Retired
April 2006
Network Working Group C. DeSanti
Request for Comments: 4438 V. Gaonkar
Category: Standards Track H.K. Vivek
K. McCloghrie
Cisco Systems
S. Gai
Retired
April 2006
Fibre Channel Name Server MIB
光纤通道名称服务器MIB
Status of This Memo
关于下段备忘
This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.
本文件规定了互联网社区的互联网标准跟踪协议，并要求进行讨论和提出改进建议。有关本协议的标准化状态和状态，请参考当前版本的“互联网官方协议标准”（STD 1）。本备忘录的分发不受限制。
Copyright Notice
版权公告
Copyright (C) The Internet Society (2006).
版权所有（C）互联网协会（2006年）。
Abstract
摘要
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for information related to the Name Server function of a Fibre Channel network. The Fibre Channel Name Server provides a means for Fibre Channel ports to register and discover Fibre Channel names and attributes.
此备忘录定义了管理信息库（MIB）的一部分，用于Internet社区中的网络管理协议。特别是，它描述了与光纤通道网络的名称服务器功能相关的信息的托管对象。光纤通道名称服务器为光纤通道端口提供了一种注册和发现光纤通道名称和属性的方法。
Table of Contents
目录
1. Introduction ....................................................3
2. The Internet-Standard Management Framework ......................3
3. Short Overview of Fibre Channel .................................3
4. Relationship to Other MIBs ......................................5
5. MIB Overview ....................................................5
5.1. Fibre Channel Management Instance ..........................5
5.2. Name Server Information Subset .............................5
5.3. Fabric Index ...............................................6
5.4. The MIB Groups .............................................6
5.4.1. The t11NsDBGroup Group ..............................6
5.4.2. Three Statistics Groups .............................7
5.4.3. The t11NsNotifyGroup Group ..........................7
5.4.4. The t11NsNotifyControlGroup Group ...................7
5.5. The Actual Values of Objects ...............................7
6. The T11-FC-NAME-SERVER-MIB Module ...............................8
7. Acknowledgements ...............................................31
8. Normative References ...........................................32
9. Informative References .........................................33
10. IANA Considerations ...........................................33
11. Security Considerations .......................................33
1. Introduction ....................................................3
2. The Internet-Standard Management Framework ......................3
3. Short Overview of Fibre Channel .................................3
4. Relationship to Other MIBs ......................................5
5. MIB Overview ....................................................5
5.1. Fibre Channel Management Instance ..........................5
5.2. Name Server Information Subset .............................5
5.3. Fabric Index ...............................................6
5.4. The MIB Groups .............................................6
5.4.1. The t11NsDBGroup Group ..............................6
5.4.2. Three Statistics Groups .............................7
5.4.3. The t11NsNotifyGroup Group ..........................7
5.4.4. The t11NsNotifyControlGroup Group ...................7
5.5. The Actual Values of Objects ...............................7
6. The T11-FC-NAME-SERVER-MIB Module ...............................8
7. Acknowledgements ...............................................31
8. Normative References ...........................................32
9. Informative References .........................................33
10. IANA Considerations ...........................................33
11. Security Considerations .......................................33
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for information related to the Fibre Channel network's Name Server function, which provides a means for Fibre Channel ports to register and discover Fibre Channel attributes. Such attributes include names, addresses, types, features, etc., at various protocol layers.
此备忘录定义了管理信息库（MIB）的一部分，用于Internet社区中的网络管理协议。特别是，它描述了与光纤通道网络的名称服务器功能相关的信息的托管对象，该功能为光纤通道端口注册和发现光纤通道属性提供了一种方法。这些属性包括不同协议层的名称、地址、类型、特征等。
For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [RFC3410].
有关描述当前互联网标准管理框架的文件的详细概述，请参阅RFC 3410[RFC3410]第7节。
Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580].
托管对象通过虚拟信息存储（称为管理信息库或MIB）进行访问。MIB对象通常通过简单网络管理协议（SNMP）进行访问。MIB中的对象是使用管理信息结构（SMI）中定义的机制定义的。本备忘录规定了符合SMIv2的MIB模块，如STD 58、RFC 2578[RFC2578]、STD 58、RFC 2579[RFC2579]和STD 58、RFC 2580[RFC2580]所述。
The Fibre Channel (FC) is logically a bidirectional point-to-point serial data channel, structured for high performance. Fibre Channel provides a general transport vehicle for higher-level protocols such as Small Computer System Interface (SCSI) command sets, the High-Performance Parallel Interface (HIPPI) data framing, IP (Internet Protocol), IEEE 802.2, and others.
光纤通道（FC）在逻辑上是一种双向点对点串行数据通道，其结构旨在实现高性能。光纤通道为高级协议（如小型计算机系统接口（SCSI）命令集、高性能并行接口（HIPI）数据帧、IP（Internet协议）、IEEE 802.2等）提供了通用传输工具。
Physically, Fibre Channel is an interconnection of multiple communication points, called N_Ports, interconnected either by a switching network, called a Fabric, or by a point-to-point link. A Fibre Channel "node" consists of one or more N_Ports. A Fabric may consist of multiple Interconnect Elements, some of which are switches. An N_Port connects to the Fabric via a port on a switch called an F_Port. When multiple FC nodes are connected to a single port on a switch via an "Arbitrated Loop" topology, the switch port is called an FL_Port, and the nodes' ports are called NL_Ports. The term Nx_Port is used to refer to either an N_Port or an NL_Port. The term Fx_Port is used to refer to either an F_Port or an FL_Port. A switch port, which is interconnected to another switch port via an
从物理上讲，光纤通道是多个通信点（称为N_端口）的互连，这些通信点通过交换网络（称为结构）或点到点链路互连。光纤通道“节点”由一个或多个N_端口组成。一个结构可以由多个互连元件组成，其中一些是交换机。N_端口通过交换机上称为F_端口的端口连接到结构。当多个FC节点通过“仲裁环路”拓扑连接到交换机上的单个端口时，交换机端口称为FL_端口，节点的端口称为NL_端口。术语Nx_端口用于指N_端口或NL_端口。术语Fx_端口用于指F_端口或FL_端口。一种交换机端口，通过网络与另一个交换机端口互连
Inter-Switch Link (ISL), is called an E_Port. A B_Port connects a bridge device with an E_Port on a switch; a B_Port provides a subset of E_Port functionality.
交换机间链路（ISL）称为E_端口。B_端口将桥接设备与交换机上的E_端口连接起来；B_端口提供E_端口功能的子集。
Many Fibre Channel components, including the Fabric, each node, and most ports, have globally-unique names. These globally-unique names are typically formatted as World Wide Names (WWNs). More information on WWNs can be found in [FC-FS]. WWNs are expected to be persistent across agent and unit resets.
许多光纤通道组件（包括光纤网、每个节点和大多数端口）具有全局唯一的名称。这些全局唯一的名称通常格式化为全球通用名称（WWN）。有关WWN的更多信息，请参见[FC-FS]。WWN预计将在代理和单元重置之间保持不变。
Fibre Channel frames contain 24-bit address identifiers, which identify the frame's source and destination ports. Each FC port has both an address identifier and a WWN. When a fabric is in use, the FC address identifiers are dynamic and are assigned by a switch. Each octet of a 24-bit address represents a level in an address hierarchy, with a Domain_ID being the highest level of the hierarchy.
光纤通道帧包含24位地址标识符，用于标识帧的源端口和目标端口。每个FC端口都有地址标识符和WWN。在使用结构时，FC地址标识符是动态的，由交换机分配。24位地址的每个八位字节表示地址层次结构中的一个级别，域ID是层次结构中的最高级别。
The Fibre Channel Name Server provides a way for N_Ports and NL_Ports to register and discover Fibre Channel attributes. Such attributes include names, addresses, types, features, etc., at various protocol layers, including upper layer protocols specific to Fibre Channel (which are sometimes called "FC-4s"). Communication with the Name Server is via Fibre Channel's CT (Common Transport for Generic Services) using "Information Units" (called CT_IUs) as either requests, responses, or unsolicited.
光纤通道名称服务器为N_端口和NL_端口提供了一种注册和发现光纤通道属性的方法。这些属性包括不同协议层的名称、地址、类型、功能等，包括光纤通道特定的上层协议（有时称为“FC-4s”）。与名称服务器的通信是通过光纤通道的CT（通用服务的公共传输），使用“信息单元”（称为CT_IUs）作为请求、响应或主动请求。
Registrations may be performed by a third party. However, the Name Server may refuse such third-party registration for unspecified reasons. Once registered, the attributes are made available to requestors.
注册可由第三方执行。但是，名称服务器可能会因未指明的原因拒绝此类第三方注册。一旦注册，这些属性就可供请求者使用。
Requestors could learn about new registrations via periodic polling of the Name Server, but such polling would generate a considerable overhead. To avoid this overhead, the Registered State Change Notification (RSCN) mechanism defined in FC-FS [FC-FS] allows an Nx_Port to register to receive an RSCN whenever an event occurs that may affect the state of other Nx_Port(s), including changes in the information registered with the Name Server.
请求者可以通过定期轮询名称服务器来了解新的注册，但这种轮询会产生相当大的开销。为了避免这种开销，FC-FS[FC-FS]中定义的注册状态更改通知（RSCN）机制允许Nx_端口在发生可能影响其他Nx_端口状态的事件时注册以接收RSCN，包括在名称服务器中注册的信息的更改。
The Fibre Channel Name Server is defined in the FC-GS specification, The latest specification is [FC-GS-4]; the previous version was [FC-GS-3].
光纤通道名称服务器在FC-GS规范中定义，最新规范为[FC-GS-4]；以前的版本是[FC-GS-3]。
The first standardized MIB for Fibre Channel [RFC2837] was focused on Fibre Channel switches. It was obsoleted by the more generic Fibre Channel Management MIB [FC-MGMT], which defines basic information for Fibre Channel hosts and switches, including extensions to the standard IF-MIB [IF-MIB] for Fibre Channel interfaces.
光纤通道的第一个标准化MIB[RFC2837]集中于光纤通道交换机。它被更通用的光纤通道管理MIB[FC-MGMT]淘汰，后者定义了光纤通道主机和交换机的基本信息，包括光纤通道接口标准IF-MIB[IF-MIB]的扩展。
This MIB extends beyond [FC-MGMT] to cover the functionality, in Fibre Channel switches, of providing Fibre Channel's Name Server function.
此MIB扩展到[FC-MGMT]之外，以涵盖光纤通道交换机中提供光纤通道名称服务器功能的功能。
This MIB also imports some common textual conventions from T11-TC-MIB, defined in [FC-FAM-MIB].
该MIB还从[FC-FAM-MIB]中定义的T11-TC-MIB中导入一些常见的文本约定。
This MIB module provides the means for monitoring the operation of, and configuring some parameters of, one or more instances of Fibre Channel Name Server functionality. (Note that there are no definitions in this MIB module of "managed actions" that can be invoked via SNMP.)
此MIB模块提供了监视一个或多个光纤通道名称服务器功能实例的操作和配置其某些参数的方法。（请注意，此MIB模块中没有可通过SNMP调用的“托管操作”定义。）
A Fibre Channel management instance is defined in [FC-MGMT] as a separable managed instance of Fibre Channel functionality. Fibre Channel functionality may be grouped into Fibre Channel management instances in whatever way is most convenient for the implementation(s). For example, one such grouping accommodates a single SNMP agent having multiple AgentX [RFC2741] sub-agents, with each sub-agent implementing a different Fibre Channel management instance.
光纤通道管理实例在[FC-MGMT]中定义为光纤通道功能的可分离托管实例。光纤通道功能可以以对实施最方便的方式分组到光纤通道管理实例中。例如，一个这样的分组容纳具有多个AgentX[RFC2741]子代理的单个SNMP代理，每个子代理实现不同的光纤通道管理实例。
The object, fcmInstanceIndex, is IMPORTed from the FC-MGMT-MIB [FC-MGMT] as the index value to uniquely identify each Fibre Channel management instance within the same SNMP context ([RFC3411], section 3.3.1).
对象fcmInstanceIndex作为索引值从FC-MGMT-MIB[FC-MGMT]导入，以唯一标识同一SNMP上下文中的每个光纤通道管理实例（[RFC3411]，第3.3.1节）。
In addition to allowing for multiple Fibre Channel management instances, this MIB is based on the notion that the information registered with the Name Server is available as one or more subsets. The MIB allows the different subsets to be accessed either:
除了允许多个光纤通道管理实例之外，此MIB还基于这样一个概念，即向名称服务器注册的信息可以作为一个或多个子集使用。MIB允许访问不同的子集：
- via different SNMP agents/contexts, - via different Fibre Channel management instances within the same SNMP agent/context, and/or - via the same Fibre Channel management instance within the same SNMP agent/context.
- 通过不同的SNMP代理/上下文，-通过同一SNMP代理/上下文中的不同光纤通道管理实例，和/或-通过同一SNMP代理/上下文中的同一光纤通道管理实例。
The union of these subsets (across all agents/contexts in the network) represents the total set of information registered with the Name Server. Note that the intersection of the subsets is often non-empty, and the use of the term "subset" does not preclude any subset from containing the complete set of Name Server information. Each of these subsets is identified using an index value called a Name Server Information Subset Index.
这些子集的联合（跨网络中的所有代理/上下文）表示向名称服务器注册的信息的总集合。请注意，子集的交集通常是非空的，使用术语“子集”并不排除任何子集包含名称服务器信息的完整集合。使用名为名称服务器信息子集索引的索引值标识这些子集中的每个子集。
Thus, all objects in this MIB are in tables that are INDEXed by at least fcmInstanceIndex and t11NsInfoSubsetIndex, where the latter contains a Name Server Information Subset Index value.
因此，此MIB中的所有对象都位于至少由fcmInstanceIndex和t11NsInfoSubsetIndex索引的表中，后者包含名称服务器信息子集索引值。
The [FC-SW-3] standard for an interconnecting Fabric consisting of multiple Fabric Switch elements describes the operation of a single Fabric in a physical infrastructure. The current [FC-SW-4] standard also supports the operation of multiple Virtual Fabrics operating within one (or more) physical infrastructures. In such a scenario, each Fabric has, of course, its own management instrumentation. In order to accommodate this scenario, this MIB module defines all Fabric-related information in tables that are INDEXed by an arbitrary integer, named a "Fabric Index". In a Fabric that is conformant to [FC-SW-3], the value of this Fabric Index will always be 1.
由多个结构交换机元件组成的互连结构的[FC-SW-3]标准描述了物理基础设施中单个结构的操作。当前的[FC-SW-4]标准还支持在一个（或多个）物理基础设施内运行多个虚拟结构。在这种情况下，每个结构当然都有自己的管理工具。为了适应这种情况，此MIB模块在表中定义了所有与结构相关的信息，这些信息由一个名为“结构索引”的任意整数索引。在符合[FC-SW-3]的结构中，该结构索引的值始终为1。
This section describes the six MIB groups contained in the MIB.
本节介绍MIB中包含的六个MIB组。
This group contains information about the operation of the Name Server function acting upon a Name Server Information Subset, including an indication of whether such operation is performed local to a particular Fibre Channel switch, or independently of a Fibre Channel switch. It also contains the information currently registered in a particular Name Server Information Subset.
此组包含有关作用于名称服务器信息子集的名称服务器功能操作的信息，包括指示此类操作是在特定光纤通道交换机本地执行，还是独立于光纤通道交换机执行。它还包含当前在特定名称服务器信息子集中注册的信息。
There are three groups of Name Server statistics objects:
有三组名称服务器统计信息对象：
t11NsRequestStatsGroup -- stats about requests t11NsRscnStatsGroup -- stats about (Name Server) RSCNs t11NsRejectStatsGroup -- stats about rejects
t11NsRequestStatsGroup--关于请求的统计信息t11NsRscnStatsGroup--关于（名称服务器）RSCNs的统计信息t11NsRejectStatsGroup--关于拒绝的统计信息
Each of these groups is conditionally mandatory; specifically, each group contains objects for particular statistics such that implementation of the group is mandatory only for an implementation that counts/captures the group's particular statistics.
这些群体中的每一个都是有条件的强制性群体；具体地说，每个组都包含特定统计数据的对象，因此，只有在统计/捕获组的特定统计数据的实现中，组的实现才是必需的。
The intent here is not to force implementations to capture these statistics, but rather to have all implementations that do capture them, provide access to them via the same MIB objects.
这里的目的不是强制实现捕获这些统计信息，而是让所有捕获它们的实现通过相同的MIB对象提供对它们的访问。
This group contains a set of notifications that provide for monitoring the rejections of Name Server Registration Requests.
此组包含一组通知，用于监视名称服务器注册请求的拒绝。
This group contains objects for controlling the generation of, and for information to be included in, the notifications defined in the t11NsNotifyGroup group.
此组包含用于控制t11NsNotifyGroup组中定义的通知的生成以及其中包含的信息的对象。
The objects defined in the t11NsRegTable represent the values registered with the Name Server. The SNMP agent MUST report the actual values, even if they are incorrectly formatted. This is the reason why, for example, the two objects that represent IP addresses, t11NsNodeIpAddress and t11NsPortIpAddress, have the SYNTAX of OCTET STRING, so that they are able to represent invalid values (which could not be represented using InetAddressType and InetAddress).
t11NsRegTable中定义的对象表示向名称服务器注册的值。SNMP代理必须报告实际值，即使它们的格式不正确。例如，这就是为什么表示IP地址的两个对象T11NSNODEIPADRESS和t11NsPortIpAddress的语法为八进制字符串，因此它们能够表示无效值（不能使用InetAddressType和InetAddress表示）。
Similarly, each set of (t11NsRejectReasonCode, t11NsRejReasonCodeExp, t11NsRejReasonVendorCode) objects must hold the values of the actual reject, explanation, and vendor-specific codes that were present in the generated Reject message (the "Reject CT_IU"), irrespective of whether or not such code values were appropriate.
类似地，每组（t11NsRejectReasonCode、t11NsRejReasonCodeExp、t11NsRejReasonVendorCode）对象必须包含生成的拒绝消息中存在的实际拒绝、解释和供应商特定代码的值（“拒绝CT_IU”），而不管这些代码值是否合适。
T11-FC-NAME-SERVER-MIB DEFINITIONS ::= BEGIN
T11-FC-NAME-SERVER-MIB DEFINITIONS ::= BEGIN
-- The MIB for management of the Fibre Channel functionality which
-- implements the Name Server function.
-- The MIB for management of the Fibre Channel functionality which
-- implements the Name Server function.
IMPORTS
MODULE-IDENTITY,OBJECT-TYPE,
NOTIFICATION-TYPE, Unsigned32,
Counter32, Integer32, mib-2 FROM SNMPv2-SMI -- [RFC2578]
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF -- [RFC2580]
SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
TruthValue, TEXTUAL-CONVENTION,
TimeStamp FROM SNMPv2-TC -- [RFC2579]
fcmInstanceIndex, FcPortType,
FcAddressIdOrZero, FcClasses,
FcNameIdOrZero FROM FC-MGMT-MIB -- [FC-MGMT]
T11FabricIndex FROM T11-TC-MIB -- [FC-FAM-MIB]
t11FamLocalSwitchWwn
FROM T11-FC-FABRIC-ADDR-MGR-MIB; -- [FC-FAM-MIB]
IMPORTS
MODULE-IDENTITY,OBJECT-TYPE,
NOTIFICATION-TYPE, Unsigned32,
Counter32, Integer32, mib-2 FROM SNMPv2-SMI -- [RFC2578]
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF -- [RFC2580]
SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
TruthValue, TEXTUAL-CONVENTION,
TimeStamp FROM SNMPv2-TC -- [RFC2579]
fcmInstanceIndex, FcPortType,
FcAddressIdOrZero, FcClasses,
FcNameIdOrZero FROM FC-MGMT-MIB -- [FC-MGMT]
T11FabricIndex FROM T11-TC-MIB -- [FC-FAM-MIB]
t11FamLocalSwitchWwn
FROM T11-FC-FABRIC-ADDR-MGR-MIB; -- [FC-FAM-MIB]
t11FcNameServerMIB MODULE-IDENTITY LAST-UPDATED "200603020000Z" ORGANIZATION "T11" CONTACT-INFO " Claudio DeSanti Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA Phone: +1 408 853-9172 EMail: cds@cisco.com
t11FcNameServerMIB MODULE-IDENTITY上次更新的“200603020000Z”组织“T11”联系人信息“Claudio DeSanti Cisco Systems，Inc.美国加利福尼亚州圣何塞市西塔斯曼大道170号电话：+1 408 853-9172电子邮件：cds@cisco.com
Keith McCloghrie Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA USA 95134 Phone: +1 408-526-5260 EMail: kzm@cisco.com" DESCRIPTION "The MIB module for the management of the functionality, which realizes the FC-GS-4 requirements for Name Server (NS).
Keith McCloghrie Cisco Systems，Inc.美国加利福尼亚州圣何塞西塔斯曼大道170号95134电话：+1 408-526-5260电子邮件：kzm@cisco.com“说明”用于管理功能的MIB模块，实现名称服务器（NS）的FC-GS-4要求。
Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4438; see the RFC itself for full legal notices."
版权所有（C）互联网协会（2006年）。此版本的MIB模块是RFC 4438的一部分；有关完整的法律通知，请参见RFC本身。”
REVISION "200603020000Z"
DESCRIPTION
"Initial version of this MIB module, published as RFC 4438."
::= { mib-2 135 }
REVISION "200603020000Z"
DESCRIPTION
"Initial version of this MIB module, published as RFC 4438."
::= { mib-2 135 }
t11NsNotifications OBJECT IDENTIFIER ::= { t11FcNameServerMIB 0 }
t11NsMIBObjects OBJECT IDENTIFIER ::= { t11FcNameServerMIB 1 }
t11NsMIBConformance OBJECT IDENTIFIER ::= { t11FcNameServerMIB 2 }
t11NsStatus OBJECT IDENTIFIER ::= { t11NsMIBObjects 1 }
t11NsStatistics OBJECT IDENTIFIER ::= { t11NsMIBObjects 2 }
t11NsNotifications OBJECT IDENTIFIER ::= { t11FcNameServerMIB 0 }
t11NsMIBObjects OBJECT IDENTIFIER ::= { t11FcNameServerMIB 1 }
t11NsMIBConformance OBJECT IDENTIFIER ::= { t11FcNameServerMIB 2 }
t11NsStatus OBJECT IDENTIFIER ::= { t11NsMIBObjects 1 }
t11NsStatistics OBJECT IDENTIFIER ::= { t11NsMIBObjects 2 }
-- Textual Conventions
--文本约定
T11NsGs4RejectReasonCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The FC-GS-4 reject reason code for a request.
T11NsGs4RejectReasonCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The FC-GS-4 reject reason code for a request.
none(1) - no error. invalidCmdCode(2) - request contained an invalid command code. invalidVerLevel(3) - request contained an invalid version number. logicalError(4) - there was a logical error. invalidIUSize(5) - the CT_IU (Information Unit) size was invalid. logicalBusy(6) - the module is busy. protocolError(7) - there was a protocol error. unableToPerformCmdReq(8) - the command specified in the req could not be executed. The details of exactly what failed will be in the corresponding reason code explanation. cmdNotSupported(9) - the command is not supported. serverNotAvailable(10) - the identified server was not available. couldNotEstabSession(11) - a server session could not be established. vendorError(12) - a vendor-specific error." REFERENCE "ANSI INCITS 387-2004, Fibre Channel - Generic Services-4 (FC-GS-4), section 4.4.3."
无（1）-无错误。invalidCmdCode（2）-请求包含无效的命令代码。invalidVerLevel（3）-请求包含无效的版本号。logicalError（4）-出现逻辑错误。无效使用（5）-CT_IU（信息单元）大小无效。逻辑忙（6）-模块正忙。协议错误（7）-出现协议错误。unableToPerformCmdReq（8）-无法执行req中指定的命令。失败原因的详细信息将在相应的原因代码说明中。cmdNotSupported（9）-不支持该命令。serverNotAvailable（10）-标识的服务器不可用。couldNotEstabSession（11）-无法建立服务器会话。供应商错误（12）-供应商特定错误。“参考”ANSI INCITS 387-2004，光纤通道-通用服务-4（FC-GS-4），第4.4.3节
SYNTAX INTEGER {
none(1),
invalidCmdCode(2),
invalidVerLevel(3),
logicalError(4),
invalidIUSize(5),
logicalBusy(6),
protocolError(7),
unableToPerformCmdReq(8),
cmdNotSupported(9),
serverNotAvailable(10),
couldNotEstabSession(11),
vendorError(12)
}
SYNTAX INTEGER {
none(1),
invalidCmdCode(2),
invalidVerLevel(3),
logicalError(4),
invalidIUSize(5),
logicalBusy(6),
protocolError(7),
unableToPerformCmdReq(8),
cmdNotSupported(9),
serverNotAvailable(10),
couldNotEstabSession(11),
vendorError(12)
}
T11NsRejReasonCodeExpl ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The reject reason code explanation:
T11NsRejReasonCodeExpl ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The reject reason code explanation:
noAdditionalExplanation(1) - no additional explanation. portIdentifierNotRegistered(2) - Port Identifier not registered. portNameNotRegistered(3) - Port Name not registered. nodeNameNotRegistered(4) - Node Name not registered. classOfServiceNotRegistered(5) - Class of Service not registered. nodeIpAddressNotRegistered(6) - 'IP Address (Node)' value not registered. ipaNotRegistered(7) - Initial Process Associator (IPA) not registered. fc4TypeNotRegistered(8) - FC-4 TYPEs not registered. symbolicPortNameNotRegistered(9) - Symbolic Port Name not registered. symbolicNodeNameNotRegistered(10) - Symbolic Node Name not registered. portTypeNotRegistered(11) - 'Port Type' not registered. portIpAddressNotRegistered(12) - 'IP Address (Port)' value not registered. fabricPortNameNotRegistered(13) - Fabric Port Name not registered. hardAddressNotRegistered(14) - 'Hard Address' not registered.
无附加说明（1）-无附加说明。portIdentifierNotRegistered（2）-端口标识符未注册。portNameNotRegistered（3）-端口名未注册。nodeNameNotRegistered（4）-未注册节点名称。已注册的服务类别（5）-未注册的服务类别。nodeIpAddressNotRegistered（6）-“IP地址（节点）”值未注册。ipaNotRegistered（7）-初始流程关联器（IPA）未注册。FC4类型未注册（8）-未注册的FC-4类型。symbolicPortNameNotRegistered（9）-未注册符号端口名。symbolicNodeNameNotRegistered（10）-未注册符号节点名称。端口类型未注册（11）-“端口类型”未注册。portIpAddressNotRegistered（12）-“IP地址（端口）”值未注册。fabricPortNameNotRegistered（13）-结构端口名称未注册。硬地址未注册（14）-“硬地址”未注册。
fc4DescriptorNotRegistered(15) - FC-4 Descriptor not registered. fc4FeaturesNotRegistered(16) - FC-4 Features not registered. accessDenied(17) - Access denied. unacceptablePortIdentifier(18) - Unacceptable Port Identifier. databaseEmpty(19) - Database is empty. noObjectRegInSpecifiedScope(20) - no object has been registered in the specified scope. domainIdNotPresent(21) - Domain ID not present. portIdNotPresent(22) - Port number not present. noDeviceAttached(23) - No device attached. authorizationException(24) - Authorization Exception. authenticationException(25) - Authentication Exception. databaseFull(26) - Database full." REFERENCE "ANSI INCITS 387-2004, Fibre Channel - Generic Services-4 (FC-GS-4), sections 4.4.4 and 5.2.4" SYNTAX INTEGER { noAdditionalExplanation(1), portIdentifierNotRegistered(2), portNameNotRegistered(3), nodeNameNotRegistered(4), classOfServiceNotRegistered(5), nodeIpAddressNotRegistered(6), ipaNotRegistered(7), fc4TypeNotRegistered(8), symbolicPortNameNotRegistered(9), symbolicNodeNameNotRegistered(10), portTypeNotRegistered(11), portIpAddressNotRegistered(12), fabricPortNameNotRegistered(13), hardAddressNotRegistered(14), fc4DescriptorNotRegistered(15), fc4FeaturesNotRegistered(16), accessDenied(17), unacceptablePortIdentifier(18), databaseEmpty(19),
FC4描述符未注册（15）-未注册FC-4描述符。FC4功能未注册（16）-未注册FC-4功能。拒绝访问（17）-拒绝访问。不可接受的端口标识符（18）-不可接受的端口标识符。databaseEmpty（19）-数据库为空。noObjectRegInSpecifiedScope（20）-未在指定范围内注册任何对象。domainIdNotPresent（21）-域ID不存在。portIdNotPresent（22）-端口号不存在。已连接节点设备（23）-未连接设备。授权例外（24）-授权例外。authenticationException（25）-身份验证异常。databaseFull（26）-数据库完整。“参考”ANSI INCITS 387-2004，光纤通道-通用服务-4（FC-GS-4），第4.4.4和5.2.4节“语法整数{NoAdditionalExpression（1），portIdentifierNotRegistered（2），portNameNotRegistered（3），nodeNameNotRegistered（4），classOfServiceNotRegistered（5），NodeIpadPressNotRegistered（6），iPanNotRegistered（7） ，fc4TypeNotRegistered（8），symbolicPortNameNotRegistered（9），symbolicNodeNameNotRegistered（10），portTypeNotRegistered（11），portIpAddressNotRegistered（12），fabricPortNameNotRegistered（13），hardAddressNotRegistered（14），fc4DescriptorNotRegistered（15），fc4FeaturesNotRegistered（16），accessDenied（17），unacceptablePortIdentifier（18），databaseEmpty（19）,
noObjectRegInSpecifiedScope(20), domainIdNotPresent(21), portIdNotPresent(22), noDeviceAttached(23), authorizationException(24), authenticationException(25), databaseFull(26) }
noObjectRegInSpecifiedScope（20）、domainIdNotPresent（21）、portIdNotPresent（22）、NodeDeviceAttached（23）、authorizationException（24）、authenticationException（25）、databaseFull（26）}
-- -- Information about a Name Server Information Subset --
----有关名称服务器信息子集的信息--
t11NsInfoSubsetTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11NsInfoSubsetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one entry for each Name Server
Information Subset within each Fibre Channel
management instance."
::= { t11NsStatus 1 }
t11NsInfoSubsetTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11NsInfoSubsetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one entry for each Name Server
Information Subset within each Fibre Channel
management instance."
::= { t11NsStatus 1 }
t11NsInfoSubsetEntry OBJECT-TYPE
SYNTAX T11NsInfoSubsetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains information about operations
on a particular Name Server Information Subset
within the Fibre Channel management instance
identified by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11NsInfoSubsetIndex }
::= { t11NsInfoSubsetTable 1 }
t11NsInfoSubsetEntry OBJECT-TYPE
SYNTAX T11NsInfoSubsetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains information about operations
on a particular Name Server Information Subset
within the Fibre Channel management instance
identified by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11NsInfoSubsetIndex }
::= { t11NsInfoSubsetTable 1 }
T11NsInfoSubsetEntry ::= SEQUENCE {
t11NsInfoSubsetIndex Unsigned32,
t11NsInfoSubsetSwitchIndex Unsigned32,
t11NsInfoSubsetTableLastChange TimeStamp,
t11NsInfoSubsetNumRows Integer32,
t11NsInfoSubsetTotalRejects Counter32,
t11NsInfoSubsetRejReqNotfyEnable TruthValue
}
T11NsInfoSubsetEntry ::= SEQUENCE {
t11NsInfoSubsetIndex Unsigned32,
t11NsInfoSubsetSwitchIndex Unsigned32,
t11NsInfoSubsetTableLastChange TimeStamp,
t11NsInfoSubsetNumRows Integer32,
t11NsInfoSubsetTotalRejects Counter32,
t11NsInfoSubsetRejReqNotfyEnable TruthValue
}
t11NsInfoSubsetIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current
t11NsInfoSubsetIndex对象类型语法Unsigned32（1..4294967295）最大访问不可访问状态当前
DESCRIPTION "An arbitrary integer value that uniquely identifies this Name Server Information Subset amongst all others within the same Fibre Channel management instance.
DESCRIPTION“在同一光纤通道管理实例中唯一标识此名称服务器信息子集的任意整数值。
It is mandatory to keep this value constant between
restarts of the agent and to make every possible
effort to keep it constant across such restarts."
::= { t11NsInfoSubsetEntry 1 }
It is mandatory to keep this value constant between
restarts of the agent and to make every possible
effort to keep it constant across such restarts."
::= { t11NsInfoSubsetEntry 1 }
t11NsInfoSubsetSwitchIndex OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object is zero when operations upon this Name Server Information Subset do not occur at a local Fibre Channel switch; otherwise, it is non-zero and identifies the local switch.
t11NsInfoSubsetSwitchIndex对象类型语法Unsigned32（0..4294967295）MAX-ACCESS只读状态当前描述“如果本地光纤通道交换机上没有对此名称服务器信息子集进行操作，则此对象的值为零；否则，它为非零并标识本地交换机。
The switch identified by a non-zero value of this
object is the same switch as is identified by the
same value of fcmSwitchIndex."
REFERENCE
"fcmSwitchIndex is defined in the FC-MGMT-MIB module"
::= { t11NsInfoSubsetEntry 2 }
The switch identified by a non-zero value of this
object is the same switch as is identified by the
same value of fcmSwitchIndex."
REFERENCE
"fcmSwitchIndex is defined in the FC-MGMT-MIB module"
::= { t11NsInfoSubsetEntry 2 }
t11NsInfoSubsetTableLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time of the last update
to any entry in the t11NsRegTable with the same values
of fcmInstanceIndex and t11NsInfoSubsetIndex. This
includes creation of an entry, deletion of an entry, or
modification of an existing entry. If no such update
has taken place since the last re-initialization of the
local network management subsystem, then this object
contains a zero value."
::= { t11NsInfoSubsetEntry 3 }
t11NsInfoSubsetTableLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time of the last update
to any entry in the t11NsRegTable with the same values
of fcmInstanceIndex and t11NsInfoSubsetIndex. This
includes creation of an entry, deletion of an entry, or
modification of an existing entry. If no such update
has taken place since the last re-initialization of the
local network management subsystem, then this object
contains a zero value."
::= { t11NsInfoSubsetEntry 3 }
t11NsInfoSubsetNumRows OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Nx_Ports currently registered in this
t11NsInfoSubsetNumRows对象类型语法整数32（0..2147483647）MAX-ACCESS只读状态当前描述“当前在此数据库中注册的Nx_端口数
Name Server Information Subset, i.e., the number of
rows in the t11NsRegTable with the same values of
fcmInstanceIndex and t11NsInfoSubsetIndex."
::= { t11NsInfoSubsetEntry 4 }
Name Server Information Subset, i.e., the number of
rows in the t11NsRegTable with the same values of
fcmInstanceIndex and t11NsInfoSubsetIndex."
::= { t11NsInfoSubsetEntry 4 }
t11NsInfoSubsetTotalRejects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of (CT_IU) Requests for Name Server functions that were rejected for inclusion in this Name Server Information Subset, across all Fabrics for which it contains information.
T11NSINFOSETOTALREJECTS对象类型语法计数器32 MAX-ACCESS只读状态当前描述“名称服务器功能的（CT_IU）请求总数，该请求被拒绝以包含在此名称服务器信息子集中，该请求跨越包含其信息的所有结构。
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0."
::= { t11NsInfoSubsetEntry 5 }
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0."
::= { t11NsInfoSubsetEntry 5 }
t11NsInfoSubsetRejReqNotfyEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether 't11NsRejectRegNotify' notifications are generated by rejections of requests to register information in this Name Server Information Subset.
t11NsInfoSubsetRejReqNotfyEnable对象类型语法TruthValue MAX-ACCESS读写状态当前描述“此对象指示是否通过拒绝在此名称服务器信息子集中注册信息的请求而生成“t11NsRejectRegNotify”通知。
If value of this object is 'true', then the notification is generated when a request is rejected. If it is 'false', the notification is not generated.
如果此对象的值为“true”，则在拒绝请求时生成通知。如果为“false”，则不会生成通知。
The persistence of values of this object across an
agent reboot is implementation-dependent."
DEFVAL { false }
::= { t11NsInfoSubsetEntry 6 }
The persistence of values of this object across an
agent reboot is implementation-dependent."
DEFVAL { false }
::= { t11NsInfoSubsetEntry 6 }
-- -- Registered Port Information --
----注册港口信息--
t11NsRegTable OBJECT-TYPE SYNTAX SEQUENCE OF T11NsRegEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries for all Nx_Ports registered
t11NsRegTable T11NsRegEntry MAX-ACCESS的对象类型语法序列不可访问状态当前描述“此表包含所有已注册Nx_端口的条目
in the identified Name Server Information Subsets across
all Fabrics for which such subsets contain information."
::= { t11NsStatus 2 }
in the identified Name Server Information Subsets across
all Fabrics for which such subsets contain information."
::= { t11NsStatus 2 }
t11NsRegEntry OBJECT-TYPE
SYNTAX T11NsRegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information about an Nx_Port
represented by t11NsRegPortIdentifier that is registered
with a Name Server Information Subset (identified by
t11NsInfoSubsetIndex) within the Fibre Channel management
instance (identified by fcmInstanceIndex) on the Fabric
(identified by t11NsRegFabricIndex)."
INDEX { fcmInstanceIndex, t11NsInfoSubsetIndex,
t11NsRegFabricIndex, t11NsRegPortIdentifier }
::= { t11NsRegTable 1 }
t11NsRegEntry OBJECT-TYPE
SYNTAX T11NsRegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information about an Nx_Port
represented by t11NsRegPortIdentifier that is registered
with a Name Server Information Subset (identified by
t11NsInfoSubsetIndex) within the Fibre Channel management
instance (identified by fcmInstanceIndex) on the Fabric
(identified by t11NsRegFabricIndex)."
INDEX { fcmInstanceIndex, t11NsInfoSubsetIndex,
t11NsRegFabricIndex, t11NsRegPortIdentifier }
::= { t11NsRegTable 1 }
T11NsRegEntry ::= SEQUENCE {
t11NsRegFabricIndex T11FabricIndex,
t11NsRegPortIdentifier FcAddressIdOrZero,
t11NsRegPortName FcNameIdOrZero,
t11NsRegNodeName FcNameIdOrZero,
t11NsRegClassOfSvc FcClasses,
t11NsRegNodeIpAddress OCTET STRING,
t11NsRegProcAssoc OCTET STRING,
t11NsRegFc4Type OCTET STRING,
t11NsRegPortType FcPortType,
t11NsRegPortIpAddress OCTET STRING,
t11NsRegFabricPortName FcNameIdOrZero,
t11NsRegHardAddress FcAddressIdOrZero,
t11NsRegSymbolicPortName SnmpAdminString,
t11NsRegSymbolicNodeName SnmpAdminString,
t11NsRegFc4Features OCTET STRING
}
T11NsRegEntry ::= SEQUENCE {
t11NsRegFabricIndex T11FabricIndex,
t11NsRegPortIdentifier FcAddressIdOrZero,
t11NsRegPortName FcNameIdOrZero,
t11NsRegNodeName FcNameIdOrZero,
t11NsRegClassOfSvc FcClasses,
t11NsRegNodeIpAddress OCTET STRING,
t11NsRegProcAssoc OCTET STRING,
t11NsRegFc4Type OCTET STRING,
t11NsRegPortType FcPortType,
t11NsRegPortIpAddress OCTET STRING,
t11NsRegFabricPortName FcNameIdOrZero,
t11NsRegHardAddress FcAddressIdOrZero,
t11NsRegSymbolicPortName SnmpAdminString,
t11NsRegSymbolicNodeName SnmpAdminString,
t11NsRegFc4Features OCTET STRING
}
t11NsRegFabricIndex OBJECT-TYPE SYNTAX T11FabricIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique index value that uniquely identifies a particular Fabric.
t11NsRegFabricIndex对象类型语法T11FabricIndex MAX-ACCESS不可访问状态当前描述“唯一标识特定结构的唯一索引值。
In a Fabric conformant to SW-3, only a single Fabric can operate within a single physical infrastructure, and thus, the value of this Fabric Index will always be 1.
在符合SW-3的结构中，只有单个结构可以在单个物理基础设施中运行，因此，此结构索引的值始终为1。
However, it is possible that future standards will define
how multiple Fabrics, each with its own management
instrumentation, could operate within one (or more) physical
infrastructures. To allow for this future possibility, this
index value is used to uniquely identify a particular
Fabric within a physical infrastructure."
::= { t11NsRegEntry 1 }
However, it is possible that future standards will define
how multiple Fabrics, each with its own management
instrumentation, could operate within one (or more) physical
infrastructures. To allow for this future possibility, this
index value is used to uniquely identify a particular
Fabric within a physical infrastructure."
::= { t11NsRegEntry 1 }
t11NsRegPortIdentifier OBJECT-TYPE
SYNTAX FcAddressIdOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Fibre Channel Address Identifier of this Nx_Port.
If no Port Identifier has been registered, then the
value of this object is the zero-length string."
::= { t11NsRegEntry 2 }
t11NsRegPortIdentifier OBJECT-TYPE
SYNTAX FcAddressIdOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Fibre Channel Address Identifier of this Nx_Port.
If no Port Identifier has been registered, then the
value of this object is the zero-length string."
::= { t11NsRegEntry 2 }
t11NsRegPortName OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port_Name (WWN) of this Nx_Port.
If this object has not been registered, then its value
is the zero-length string."
DEFVAL {''H}
::= { t11NsRegEntry 3 }
t11NsRegPortName OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port_Name (WWN) of this Nx_Port.
If this object has not been registered, then its value
is the zero-length string."
DEFVAL {''H}
::= { t11NsRegEntry 3 }
t11NsRegNodeName OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Node_Name (WWN) of this Nx_Port.
If this object has not been registered, then its value
is the zero-length string."
DEFVAL {''H}
::= { t11NsRegEntry 4 }
t11NsRegNodeName OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Node_Name (WWN) of this Nx_Port.
If this object has not been registered, then its value
is the zero-length string."
DEFVAL {''H}
::= { t11NsRegEntry 4 }
t11NsRegClassOfSvc OBJECT-TYPE SYNTAX FcClasses MAX-ACCESS read-only STATUS current DESCRIPTION "The class of service indicator. This object is an array of bits that contain a bit map of the classes of service supported by the associated port. If a bit in
t11NsRegClassOfSvc对象类型语法FcClasses MAX-ACCESS只读状态当前描述“服务类别指示符。此对象是一个位数组，包含关联端口支持的服务类别的位图。如果
this object is 1, it indicates that the class of service is supported by the associated port. When a bit is set to 0, it indicates that no class of service is supported by this Nx_Port.
此对象为1，表示关联端口支持服务类。位设置为0时，表示此Nx_端口不支持任何服务类别。
If this object has not been not registered for a port,
then the instance for that port is not instantiated."
::= { t11NsRegEntry 5 }
If this object has not been not registered for a port,
then the instance for that port is not instantiated."
::= { t11NsRegEntry 5 }
t11NsRegNodeIpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0 | 16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the node of this Nx_Port, in network-byte order, either as a 32-bit IPv4 address or a 128-bit IPv6 address. For the former, the leftmost 96 bits (12 bytes) should contain x'00 00 00 00 00 00 00 00 00 00 FF FF', and the IPv4 address should be present in the rightmost 32 bits.
t11NsRegNodeIpAddress对象类型语法八位字符串（大小（0 | 16））MAX-ACCESS只读状态当前描述“此Nx|U端口节点的IP地址，按网络字节顺序排列，可以是32位IPv4地址，也可以是128位IPv6地址。对于前者，最左边的96位（12字节）应包含x'00 00 FF'，IPv4地址应位于最右边的32位。
Note that the value of this object is the IP address value that is received in the FC-GS-4 message Register IP address (Node) RIP_NN. It is not validated against any IP address format.
请注意，此对象的值是在FC-GS-4消息寄存器IP地址（节点）RIP_NN中接收的IP地址值。它不会根据任何IP地址格式进行验证。
If no 'IP address (Node)' has been registered, then the
value of this object is the zero-length string."
REFERENCE
"ANSI INCITS 387-2004, Fibre Channel - Generic
Services-4 (FC-GS-4)"
DEFVAL { ''H }
::= { t11NsRegEntry 6 }
If no 'IP address (Node)' has been registered, then the
value of this object is the zero-length string."
REFERENCE
"ANSI INCITS 387-2004, Fibre Channel - Generic
Services-4 (FC-GS-4)"
DEFVAL { ''H }
::= { t11NsRegEntry 6 }
t11NsRegProcAssoc OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0 | 8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Fibre Channel Initial Process Associator (IPA).
t11NsRegProcAssoc对象类型语法八位字节字符串（大小（0 | 8））MAX-ACCESS只读状态当前描述“光纤通道初始进程关联器（IPA）”。
If no 'Initial Process Associator' has been registered,
then the value of this object is the zero-length string."
REFERENCE
"ANSI INCITS 387-2004, Fibre Channel - Generic
Services-4 (FC-GS-4)"
DEFVAL { ''H }
::= { t11NsRegEntry 7 }
If no 'Initial Process Associator' has been registered,
then the value of this object is the zero-length string."
REFERENCE
"ANSI INCITS 387-2004, Fibre Channel - Generic
Services-4 (FC-GS-4)"
DEFVAL { ''H }
::= { t11NsRegEntry 7 }
t11NsRegFc4Type OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0 | 32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The FC-4 protocol types supported by this Nx_Port. This is an array of 256 bits. Each bit in the array corresponds to a Type value as defined by Fibre Channel standards and contained in the Type field of the frame header. The order of the bits in the 256-bit (32-byte) value is the same as defined in FC-GS-4, section 5.2.3.8, and represented in network-byte order.
t11NsRegFc4Type对象类型语法八位字节字符串（大小（0 | 32））MAX-ACCESS只读状态当前说明“此Nx_端口支持的FC-4协议类型。这是一个256位的数组。阵列中的每个位对应于光纤通道标准定义的类型值，并包含在帧头的类型字段中。256位（32字节）值中的位顺序与FC-GS-4第5.2.3.8节中的定义相同，并以网络字节顺序表示。
If no 'FC-4 TYPEs' has been registered, then the
value of this object is the zero-length string."
REFERENCE
"ANSI INCITS 387-2004, Fibre Channel - Generic
Services-4 (FC-GS-4), section 5.2.3.8."
DEFVAL { ''H }
::= { t11NsRegEntry 8 }
If no 'FC-4 TYPEs' has been registered, then the
value of this object is the zero-length string."
REFERENCE
"ANSI INCITS 387-2004, Fibre Channel - Generic
Services-4 (FC-GS-4), section 5.2.3.8."
DEFVAL { ''H }
::= { t11NsRegEntry 8 }
t11NsRegPortType OBJECT-TYPE SYNTAX FcPortType MAX-ACCESS read-only STATUS current DESCRIPTION "The port type of this port.
t11NsRegPortType对象类型语法FcPortType MAX-ACCESS只读状态当前描述“此端口的端口类型。
If no 'Port Type' has been registered, then the value
of this object is unidentified and is represented by
the value 'unknown'."
DEFVAL { 1 } -- 'unknown', see [FC-MGMT]
::= { t11NsRegEntry 9 }
If no 'Port Type' has been registered, then the value
of this object is unidentified and is represented by
the value 'unknown'."
DEFVAL { 1 } -- 'unknown', see [FC-MGMT]
::= { t11NsRegEntry 9 }
t11NsRegPortIpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0 | 16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value that Fibre Channel calls an 'IP Address (Port)' that represents the IP address of the associated port. The value is either in 32-bit IPv4 format or 128-bit IPv6 format, in network-byte order. When this object contains an IPv4 address, the leftmost 96 bits (12 bytes) should contain x'00 00 00 00 00 00 00 00 00 00 FF FF'. The IPv4 address should be present in the rightmost 32 bits.
t11NsRegPortIpAddress对象类型语法八位字符串（大小（0 | 16））MAX-ACCESS只读状态当前描述“光纤通道调用的“IP地址（端口）”的值'表示关联端口的IP地址。该值为32位IPv4格式或128位IPv6格式，按网络字节顺序排列。当此对象包含IPv4地址时，最左边的96位（12字节）应包含x'00 00 FF'。IPv4地址应位于最右边的32位。
Note that the value of this object is the IP address value
请注意，此对象的值是IP地址值
that is received in the FC-GS-4 message Register IP address (Port) RIPP_ID. It is not validated against any IP address format.
在FC-GS-4消息寄存器IP地址（端口）RIPP_ID中接收。未根据任何IP地址格式验证。
If no 'IP address (Port)' has been registered, then the
value of this object is the zero-length string."
REFERENCE
"ANSI INCITS 387-2004, Fibre Channel - Generic
Services-4, (FC-GS-4)"
DEFVAL {''H}
::= { t11NsRegEntry 10 }
If no 'IP address (Port)' has been registered, then the
value of this object is the zero-length string."
REFERENCE
"ANSI INCITS 387-2004, Fibre Channel - Generic
Services-4, (FC-GS-4)"
DEFVAL {''H}
::= { t11NsRegEntry 10 }
t11NsRegFabricPortName OBJECT-TYPE SYNTAX FcNameIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The Fabric Port Name (WWN) of the Fx_Port to which this Nx_Port is attached.
t11NsRegFabricPortName对象类型语法FcNameIdOrZero MAX-ACCESS只读状态当前描述“连接此Nx_端口的Fx_端口的结构端口名称（WWN）”。
If no 'Fabric Port Name' has been registered, then the
value of this object is the zero-length string."
DEFVAL {''H}
::= { t11NsRegEntry 11 }
If no 'Fabric Port Name' has been registered, then the
value of this object is the zero-length string."
DEFVAL {''H}
::= { t11NsRegEntry 11 }
t11NsRegHardAddress OBJECT-TYPE SYNTAX FcAddressIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The format of this object is identical to the format of Hard Address defined in the Discover Address (ADISC) Extended Link Service (FC-FS).
T11nsregharddress对象类型语法FcAddressIdOrZero MAX-ACCESS只读状态当前描述“此对象的格式与发现地址（ADISC）扩展链接服务（FC-FS）中定义的硬地址格式相同。
Hard Address is the 24-bit NL_Port identifier that consists of: - the 8-bit Domain_ID in the most significant byte - the 8-bit Area_ID in the next most significant byte - the 8-bit AL-PA (Arbitrated Loop Physical Address) which an NL_Port attempts acquire during FC-AL initialization in the least significant byte.
硬地址是24位NL_端口标识符，包括：-最高有效字节中的8位域ID-下一个最高有效字节中的8位区域ID-NL_端口在FC-AL初始化期间尝试获取的最低有效字节中的8位AL-PA（仲裁环路物理地址）。
If the port is not an NL_Port, or if it is an NL_Port but does not have a hard address, then all bits are reported as zeros.
如果端口不是NL_端口，或者如果它是NL_端口但没有硬地址，则所有位都报告为零。
If no 'Hard Address' has been registered, then the
如果没有注册“硬地址”，则
value of this object is the zero-length string."
DEFVAL {''H}
::= { t11NsRegEntry 12 }
value of this object is the zero-length string."
DEFVAL {''H}
::= { t11NsRegEntry 12 }
t11NsRegSymbolicPortName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The user-defined name of this port.
t11NsRegSymbolicPortName对象类型语法SnmpAdminString（大小（0..255））MAX-ACCESS只读状态当前描述“此端口的用户定义名称。
If no 'Symbolic Port Name' has been registered, then
the value of this object is the zero-length string."
DEFVAL {''H}
::= { t11NsRegEntry 13 }
If no 'Symbolic Port Name' has been registered, then
the value of this object is the zero-length string."
DEFVAL {''H}
::= { t11NsRegEntry 13 }
t11NsRegSymbolicNodeName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The user-defined name of the node of this port.
t11NsRegSymbolicNodeName对象类型语法SnmpAdminString（大小（0..255））MAX-ACCESS只读状态当前描述“此端口节点的用户定义名称。
If no 'Symbolic Node Name' has been registered, then
the value of this object is the zero-length string."
DEFVAL {''H}
::= { t11NsRegEntry 14 }
If no 'Symbolic Node Name' has been registered, then
the value of this object is the zero-length string."
DEFVAL {''H}
::= { t11NsRegEntry 14 }
t11NsRegFc4Features OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0 | 128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The FC-4 Features associated with FC-4 Types on this port encoded as a 128-byte value in network-byte order, or the zero-length string if no 'FC-4 Features' have been registered.
t11NsRegFc4Features对象类型语法八位字节字符串（大小（0 | 128））MAX-ACCESS只读状态当前描述“此端口上与FC-4类型关联的FC-4功能以网络字节顺序编码为128字节值，如果未注册“FC-4功能”，则为零长度字符串。
Section 5.2.3.15 of FC-GS-4 is the authoritative definition of the format of the 128-byte value, i.e., if different, FC-GS-4 takes precedence over the following description:
FC-GS-4第5.2.3.15节是128字节值格式的权威定义，即如果不同，FC-GS-4优先于以下说明：
The 128-byte value is an array of 4-bit values, one for each FC-4 Type value, positioned as follows: the 5 most significant bits of a Type value identify where it appears within the 128-byte value, specifically, within which word:
128字节值是一个4位值的数组，每个FC-4类型值对应一个，定位如下：类型值的5个最高有效位标识其在128字节值中出现的位置，特别是在哪个字中：
- Word 0 (of the 128-byte value) contains information related to Types '00' through '07'; - Word 1 contains information related to Types '08' through 0F'; - and so forth, up to Word 31, which contains information related to Types 'F8' through 'FF'.
- 字0（128字节的值）包含与类型“00”到“07”相关的信息Word 1包含与类型“08”到“0F”相关的信息；-以此类推，直到Word 31，其中包含与“F8”到“FF”类型相关的信息。
The least significant of the eight 4-bit values in each
Word represents an FC-4 Type with 000 as its 3 least
significant bits, and most significant 4-bit value in
each Word represents an FC-4 Type with 111 as its 3 least
significant bits."
REFERENCE
"ANSI INCITS 387-2004, Fibre Channel - Generic
Services-4 (FC-GS-4), section 5.2.3.15."
DEFVAL {''H}
::= { t11NsRegEntry 15 }
The least significant of the eight 4-bit values in each
Word represents an FC-4 Type with 000 as its 3 least
significant bits, and most significant 4-bit value in
each Word represents an FC-4 Type with 111 as its 3 least
significant bits."
REFERENCE
"ANSI INCITS 387-2004, Fibre Channel - Generic
Services-4 (FC-GS-4), section 5.2.3.15."
DEFVAL {''H}
::= { t11NsRegEntry 15 }
-- -- Registered FC-4 Descriptors --
----注册的FC-4描述符--
t11NsRegFc4DescriptorTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11NsRegFc4DescriptorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains entries for all FC-4 Descriptors
registered in the identified Name Server Information
Subsets across all Fabrics for which such subsets
contain information."
::= { t11NsStatus 3 }
t11NsRegFc4DescriptorTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11NsRegFc4DescriptorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains entries for all FC-4 Descriptors
registered in the identified Name Server Information
Subsets across all Fabrics for which such subsets
contain information."
::= { t11NsStatus 3 }
t11NsRegFc4DescriptorEntry OBJECT-TYPE SYNTAX T11NsRegFc4DescriptorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the t11NsRegFc4DescriptorTable, containing information about an FC-4 Descriptor that is associated with a particular FC-4 Type value. The particular FC-4 Descriptor was registered by an Nx_Port (identified by t11NsRegPortIdentifier) in a Name Server Information Subset (identified by t11NsInfoSubsetIndex) within the Fibre Channel management instance (identified by fcmInstanceIndex) on the Fabric (identified by
t11NsRegFc4DescriptorEntry对象类型语法t11NsRegFc4DescriptorEntry MAX-ACCESS不可访问状态当前描述“t11NsRegFc4DescriptorTable中的一个条目，包含有关与特定FC-4类型值关联的FC-4描述符的信息。特定FC-4描述符由Nx_端口注册（由t11NsRegPortIdentifier标识）在光纤通道管理实例（由fcmInstanceIndex标识）中的名称服务器信息子集（由t11NsInfoSubsetIndex标识）中，该实例位于结构（由
t11NsRegFabricIndex).
t11NsRegFabricIndex）。
If no FC-4 Descriptors have been registered
for a particular port, then there will be no
entries in this table for that port."
INDEX { fcmInstanceIndex, t11NsInfoSubsetIndex,
t11NsRegFabricIndex, t11NsRegPortIdentifier,
t11NsRegFc4TypeValue }
::= { t11NsRegFc4DescriptorTable 1 }
If no FC-4 Descriptors have been registered
for a particular port, then there will be no
entries in this table for that port."
INDEX { fcmInstanceIndex, t11NsInfoSubsetIndex,
t11NsRegFabricIndex, t11NsRegPortIdentifier,
t11NsRegFc4TypeValue }
::= { t11NsRegFc4DescriptorTable 1 }
T11NsRegFc4DescriptorEntry ::= SEQUENCE {
t11NsRegFc4TypeValue Unsigned32,
t11NsRegFc4Descriptor OCTET STRING
}
T11NsRegFc4DescriptorEntry ::= SEQUENCE {
t11NsRegFc4TypeValue Unsigned32,
t11NsRegFc4Descriptor OCTET STRING
}
t11NsRegFc4TypeValue OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer value that identifies an FC-4 Type value (representing a particular protocol type, as specified in FC-FS) for which an FC-4 Descriptor has been registered.
t11NsRegFc4TypeValue对象类型语法Unsigned32（0..255）MAX-ACCESS not accessible STATUS current DESCRIPTION“一个整数值，用于标识已为其注册FC-4描述符的FC-4类型值（表示FC-FS中指定的特定协议类型）。
An instance of this object contains a 'Type value'
that corresponds to a '1' bit in the value of the
t11NsRegFc4Type registered for the same port;
this correspondence is as specified in FC-GS-4."
REFERENCE
"ANSI INCITS 387-2004, Fibre Channel - Generic
Services-4 (FC-GS-4), section 5.2.3.8, and
ANSI INCITS 373-2003, Fibre Channel - Framing and
Signaling (FC-FS), section 9.6, Table 29."
::= { t11NsRegFc4DescriptorEntry 1 }
An instance of this object contains a 'Type value'
that corresponds to a '1' bit in the value of the
t11NsRegFc4Type registered for the same port;
this correspondence is as specified in FC-GS-4."
REFERENCE
"ANSI INCITS 387-2004, Fibre Channel - Generic
Services-4 (FC-GS-4), section 5.2.3.8, and
ANSI INCITS 373-2003, Fibre Channel - Framing and
Signaling (FC-FS), section 9.6, Table 29."
::= { t11NsRegFc4DescriptorEntry 1 }
t11NsRegFc4Descriptor OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The FC-4 Descriptor value that has been registered for the particular port on the particular Fabric, and for the FC-4 Type represented by the corresponding value of t11NsRegFc4TypeIndex.
对于特定类型的描述符（nsrc41fc-octex-STATUS），该描述符的当前类型（nsrc41fc-etc-TYPE）值仅由nsrc41fc-octex-STATUS表示。
The format of an FC-4 Descriptor is dependent on the corresponding FC-4 Type value, but is represented in
FC-4描述符的格式取决于相应的FC-4类型值，但以
network-byte order."
REFERENCE
"ANSI INCITS 387-2004, Fibre Channel - Generic
Services-4 (FC-GS-4), section 5.2.5.42"
::= { t11NsRegFc4DescriptorEntry 2 }
network-byte order."
REFERENCE
"ANSI INCITS 387-2004, Fibre Channel - Generic
Services-4 (FC-GS-4), section 5.2.5.42"
::= { t11NsRegFc4DescriptorEntry 2 }
-- -- Name Server per-Fabric Statistics --
----每个结构的名称服务器统计信息--
t11NsStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11NsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains per-Fabric state and statistics
for operations upon the identified Name Server
Information Subsets."
::= { t11NsStatistics 1 }
t11NsStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11NsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains per-Fabric state and statistics
for operations upon the identified Name Server
Information Subsets."
::= { t11NsStatistics 1 }
t11NsStatsEntry OBJECT-TYPE
SYNTAX T11NsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table contains state and statistics
for operations upon a Name Server Information Subset
(identified by t11NsInfoSubsetIndex) within the Fibre
Channel management instance (identified by
fcmInstanceIndex) on the Fabric (identified by
t11NsRegFabricIndex)."
INDEX { fcmInstanceIndex, t11NsInfoSubsetIndex,
t11NsRegFabricIndex }
::= { t11NsStatsTable 1 }
t11NsStatsEntry OBJECT-TYPE
SYNTAX T11NsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table contains state and statistics
for operations upon a Name Server Information Subset
(identified by t11NsInfoSubsetIndex) within the Fibre
Channel management instance (identified by
fcmInstanceIndex) on the Fabric (identified by
t11NsRegFabricIndex)."
INDEX { fcmInstanceIndex, t11NsInfoSubsetIndex,
t11NsRegFabricIndex }
::= { t11NsStatsTable 1 }
T11NsStatsEntry ::= SEQUENCE {
t11NsInGetReqs Counter32,
t11NsOutGetReqs Counter32,
t11NsInRegReqs Counter32,
t11NsInDeRegReqs Counter32,
t11NsInRscns Counter32,
t11NsOutRscns Counter32,
t11NsRejects Counter32,
t11NsDatabaseFull TruthValue
}
T11NsStatsEntry ::= SEQUENCE {
t11NsInGetReqs Counter32,
t11NsOutGetReqs Counter32,
t11NsInRegReqs Counter32,
t11NsInDeRegReqs Counter32,
t11NsInRscns Counter32,
t11NsOutRscns Counter32,
t11NsRejects Counter32,
t11NsDatabaseFull TruthValue
}
t11NsInGetReqs OBJECT-TYPE
t11NsInGetReqs对象类型
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of (CT_IU) Get Requests received requesting information from this Name Server Information Subset on this Fabric.
SYNTAX Counter 32 MAX-ACCESS只读状态current DESCRIPTION“接收到的（CT_IU）Get请求总数，请求此结构上此名称服务器信息子集的信息。
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0."
::= { t11NsStatsEntry 1 }
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0."
::= { t11NsStatsEntry 1 }
t11NsOutGetReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of (CT_IU) Get Requests sent in order to obtain information needed in this Name Server Information Subset on this Fabric.
t11NsOutGetReqs对象类型语法计数器32 MAX-ACCESS只读状态当前描述“为获取此结构上此名称服务器信息子集所需的信息而发送的（CT_IU）Get请求总数。
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0."
::= { t11NsStatsEntry 2 }
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0."
::= { t11NsStatsEntry 2 }
t11NsInRegReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of (CT_IU) Registration Requests received to register information in the Name Server Information Subset on this Fabric.
t11NsInRegReqs对象类型语法计数器32 MAX-ACCESS只读状态当前描述“为在此结构上的名称服务器信息子集中注册信息而接收的（CT_IU）注册请求总数。
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0."
::= { t11NsStatsEntry 3 }
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0."
::= { t11NsStatsEntry 3 }
t11NsInDeRegReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of (CT_IU) De-registration Requests received to de-register information from this Name Server Information Subset on this Fabric.
T11nsInderegrQS对象类型语法计数器32 MAX-ACCESS只读状态当前描述“为从此结构上的名称服务器信息子集取消注册信息而接收的（CT_IU）取消注册请求总数。
This counter has no discontinuities other than those
此计数器除了以下中断之外没有其他中断
that all Counter32s have when sysUpTime=0."
::= { t11NsStatsEntry 4 }
that all Counter32s have when sysUpTime=0."
::= { t11NsStatsEntry 4 }
t11NsInRscns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received RSCNs, indicating Name Server-related changes relating to this Name Server Information Subset on this Fabric.
t11NsInRscns对象类型语法计数器32 MAX-ACCESS只读状态当前描述“接收到的RSCN总数，指示与此结构上此名称服务器信息子集相关的名称服务器相关更改。
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0."
::= { t11NsStatsEntry 5 }
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0."
::= { t11NsStatsEntry 5 }
t11NsOutRscns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted RSCNs, indicating Name Server-related changes relating to this Name Server Information Subset on this Fabric.
t11NsOutRscns对象类型语法计数器32 MAX-ACCESS只读状态当前描述“传输的RSCN总数，指示与此结构上的此名称服务器信息子集相关的名称服务器相关更改。
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0."
::= { t11NsStatsEntry 6 }
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0."
::= { t11NsStatsEntry 6 }
t11NsRejects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of CT_IU Requests for Name Server functions on this Name Server Information Subset on this Fabric that were rejected.
t11NsRejects OBJECT-TYPE SYNTAX counter 32 MAX-ACCESS只读状态current DESCRIPTION“此结构上此名称服务器信息子集上的名称服务器功能的CT_IU请求被拒绝的总数。
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0."
::= { t11NsStatsEntry 7 }
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0."
::= { t11NsStatsEntry 7 }
t11NsDatabaseFull OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of whether the database containing this
t11NsDatabaseFull对象类型语法TruthValue MAX-ACCESS只读状态当前描述“指示数据库是否包含此
Name Server Information Subset is full. This object is
set to 'true' only if the Name Server is unable to allocate
space for a new entry for the corresponding Fabric, and it is
set to 'false' whenever an existing entry is deleted for the
corresponding Fabric."
::= { t11NsStatsEntry 8 }
Name Server Information Subset is full. This object is
set to 'true' only if the Name Server is unable to allocate
space for a new entry for the corresponding Fabric, and it is
set to 'false' whenever an existing entry is deleted for the
corresponding Fabric."
::= { t11NsStatsEntry 8 }
-- -- Reject information objects --
----拒绝信息对象--
t11NsRejectTable OBJECT-TYPE SYNTAX SEQUENCE OF T11NsRejectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about the most recent Name Server Registration Request failures for various ports on various Fabrics.
t11NsRejectTable对象类型语法T11NsRejectEntry MAX-ACCESS不可访问状态当前描述“此表包含有关各种结构上各种端口的最新名称服务器注册请求失败的信息。
If no information is available about the most recent rejection of a Registration Request on a particular port on a particular Fabric, then there will no entry in this table for that port and Fabric.
如果没有关于某个特定结构上某个特定端口的注册请求最近被拒绝的信息，则此表中不会有该端口和结构的条目。
When a t11NsRejectRegNotify notification is sent for
such a Registration Request failure, the values of the
objects in the relevant entry of this table are updated
immediately prior to generating the notification."
::= { t11NsStatus 4 }
When a t11NsRejectRegNotify notification is sent for
such a Registration Request failure, the values of the
objects in the relevant entry of this table are updated
immediately prior to generating the notification."
::= { t11NsStatus 4 }
t11NsRejectEntry OBJECT-TYPE
SYNTAX T11NsRejectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information about the most recent
rejection of a request to register information in the Name
Server Information Subset (identified by
t11NsInfoSubsetIndex) within the Fibre Channel management
instance (identified by fcmInstanceIndex) for a particular
port (identified by t11NsRegPortIdentifier) on a particular
Fabric (identified by t11NsRegFabricIndex)."
INDEX { fcmInstanceIndex, t11NsInfoSubsetIndex,
t11NsRegFabricIndex, t11NsRegPortIdentifier }
::= { t11NsRejectTable 1 }
t11NsRejectEntry OBJECT-TYPE
SYNTAX T11NsRejectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information about the most recent
rejection of a request to register information in the Name
Server Information Subset (identified by
t11NsInfoSubsetIndex) within the Fibre Channel management
instance (identified by fcmInstanceIndex) for a particular
port (identified by t11NsRegPortIdentifier) on a particular
Fabric (identified by t11NsRegFabricIndex)."
INDEX { fcmInstanceIndex, t11NsInfoSubsetIndex,
t11NsRegFabricIndex, t11NsRegPortIdentifier }
::= { t11NsRejectTable 1 }
T11NsRejectEntry ::= SEQUENCE {
T11NsRejectEntry ::= SEQUENCE {
t11NsRejectCtCommandString OCTET STRING, t11NsRejectReasonCode T11NsGs4RejectReasonCode, t11NsRejReasonCodeExp T11NsRejReasonCodeExpl, t11NsRejReasonVendorCode OCTET STRING }
t11NsRejectCtCommandString八位字符串，t11NsRejectReasonCode T11NsGs4RejectReasonCode，t11NsRejReasonCodeExp T11NsRejReasonCodeExpl，t11NsRejReasonVendorCode八位字符串}
t11NsRejectCtCommandString OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The binary content of the Registration Request, formatted as an octet string (in network byte order) containing the CT_IU, as described in Table 2 of [FC-GS-4] (including the preamble), which was most recently rejected for the particular Name Server Information Subset on the particular port on the particular Fabric.
t11NsRejectCtCommandString对象类型语法八位元字符串（大小（0..255））MAX-ACCESS只读状态当前描述“注册请求的二进制内容，格式为八位元字符串（以网络字节顺序），包含CT_IU，如[FC-GS-4]表2所述（包括序言），最近由于特定结构上特定端口上的特定名称服务器信息子集而被拒绝。
This object contains the zero-length string if and when the CT-IU's content is unavailable.
当CT-IU的内容不可用时，此对象包含零长度字符串。
When the length of this object is 255 octets, it
contains the first 255 octets of the CT-IU (in
network-byte order)."
::= { t11NsRejectEntry 1 }
When the length of this object is 255 octets, it
contains the first 255 octets of the CT-IU (in
network-byte order)."
::= { t11NsRejectEntry 1 }
t11NsRejectReasonCode OBJECT-TYPE
SYNTAX T11NsGs4RejectReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A registration reject reason code. This object
contains the reason code of the most recent Name
Server Registration Request failure for the
particular port on the particular Fabric."
::= { t11NsRejectEntry 2 }
t11NsRejectReasonCode OBJECT-TYPE
SYNTAX T11NsGs4RejectReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A registration reject reason code. This object
contains the reason code of the most recent Name
Server Registration Request failure for the
particular port on the particular Fabric."
::= { t11NsRejectEntry 2 }
t11NsRejReasonCodeExp OBJECT-TYPE
SYNTAX T11NsRejReasonCodeExpl
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A registration reject reason code explanation. This
object contains the reason code explanation of the most
recent Name Server Registration Request failure for the
particular port on the particular Fabric."
::= { t11NsRejectEntry 3 }
t11NsRejReasonCodeExp OBJECT-TYPE
SYNTAX T11NsRejReasonCodeExpl
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A registration reject reason code explanation. This
object contains the reason code explanation of the most
recent Name Server Registration Request failure for the
particular port on the particular Fabric."
::= { t11NsRejectEntry 3 }
t11NsRejReasonVendorCode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A registration reject vendor-specific code. This
object contains the vendor-specific code of the most
recent Name Server Registration Request failure for the
particular port on the particular Fabric."
::= { t11NsRejectEntry 4 }
t11NsRejReasonVendorCode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A registration reject vendor-specific code. This
object contains the vendor-specific code of the most
recent Name Server Registration Request failure for the
particular port on the particular Fabric."
::= { t11NsRejectEntry 4 }
-- -- Notifications --
----通知--
t11NsRejectRegNotify NOTIFICATION-TYPE OBJECTS { t11FamLocalSwitchWwn, t11NsRegPortName, t11NsRejectCtCommandString, t11NsRejectReasonCode, t11NsRejReasonCodeExp, t11NsRejReasonVendorCode } STATUS current DESCRIPTION "This notification is generated whenever a request to register information in a Name Server Information Subset (for which the corresponding instance of t11NsInfoSubsetRejReqNotfyEnable is 'true') is rejected on a particular Fabric for a particular Nx_Port.
t11NsRejectRegNotify通知类型对象{t11FamLocalSwitchWwn、t11NsRegPortName、t11NsRejectCtCommandString、t11NsRejectReasonCode、t11NsRejReasonCodeExp、t11NsRejReasonVendorCode}状态当前描述“每当请求在名称服务器信息子集中注册信息时，都会生成此通知（对于该实例，T11NSINFOSubstreJReqNotfyEnable的对应实例为“true”）在特定Nx_端口的特定结构上被拒绝。
The value of t11FamLocalSwitchWwn indicates the WWN of the switch that received the request. (If the WWN is unavailable, the value is set to the zero-length string.)
t11FamLocalSwitchWwn的值表示接收请求的交换机的WWN。（如果WWN不可用，则该值设置为零长度字符串。）
The value of t11NsRejectCtCommandString indicates the rejected request, and the values of t11NsRejectReasonCode, t11NsRejReasonCodeExp, and t11NsRejReasonVendorCode indicate the reason for the rejection.
t11NsRejectCtCommandString的值表示拒绝的请求，t11NsRejectReasonCode、t11NsRejReasonCodeExp和t11NsRejReasonVendorCode的值表示拒绝的原因。
The value of t11NsRegPortName represents the Port Name
if it is able to be extracted out of the Registration
Request, or otherwise the value as currently registered
on the port."
::= { t11NsNotifications 1 }
The value of t11NsRegPortName represents the Port Name
if it is able to be extracted out of the Registration
Request, or otherwise the value as currently registered
on the port."
::= { t11NsNotifications 1 }
-- -- Conformance
----一致性
--
--
t11NsMIBCompliances OBJECT IDENTIFIER ::= {t11NsMIBConformance 1}
t11NsMIBGroups OBJECT IDENTIFIER ::= {t11NsMIBConformance 2}
t11NsMIBCompliances OBJECT IDENTIFIER ::= {t11NsMIBConformance 1}
t11NsMIBGroups OBJECT IDENTIFIER ::= {t11NsMIBConformance 2}
t11NsMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities that implement the Fibre Channel Name Server." MODULE MANDATORY-GROUPS {t11NsDBGroup, t11NsNotifyControlGroup, t11NsNotifyGroup}
T11NSMIB COMPLIANCE MODULE-COMPLIANCE STATUS当前描述“实现光纤通道名称服务器的实体的符合性声明”。模块强制组{t11NsDBGroup，t11NsNotifyControlGroup，t11NsNotifyGroup}
OBJECT t11NsInfoSubsetRejReqNotfyEnable MIN-ACCESS read-only DESCRIPTION "Write access is not required."
对象T11nsInfoSubstreJReqNotfyEnable最小访问只读说明“不需要写访问。”
GROUP t11NsRequestStatsGroup DESCRIPTION "This group is mandatory only for an implementation that captures statistics related to Name Server requests."
组t11NsRequestStatsGroup DESCRIPTION“此组仅对于捕获与名称服务器请求相关的统计信息的实现是必需的。”
GROUP t11NsRscnStatsGroup DESCRIPTION "This group is mandatory only for an implementation that captures statistics related to Name Server-related RSCNs."
组t11NsRscnStatsGroup DESCRIPTION“此组仅对于捕获与名称服务器相关的RSCN相关的统计信息的实现是必需的。”
GROUP t11NsRejectStatsGroup DESCRIPTION "This group is mandatory only for an implementation that captures statistics related to Name Server rejects."
组t11NsRejectStatsGroup DESCRIPTION“此组仅对于捕获与名称服务器拒绝相关的统计信息的实现是必需的。”
::= { t11NsMIBCompliances 1 }
::= { t11NsMIBCompliances 1 }
-- Units of conformance
--一致性单位
t11NsDBGroup OBJECT-GROUP OBJECTS { t11NsInfoSubsetSwitchIndex, t11NsInfoSubsetTableLastChange, t11NsInfoSubsetNumRows, t11NsRegPortName, t11NsRegNodeName, t11NsRegClassOfSvc,
t11NsDBGroup对象组对象{t11NsInfoSubsetSwitchIndex，T11NSINFOSubsetableLastChange，t11NsInfoSubsetNumRows，t11NsRegPortName，t11NsRegNodeName，t11NsRegClassOfSvc，
t11NsRegNodeIpAddress,
t11NsRegProcAssoc,
t11NsRegFc4Type,
t11NsRegPortType,
t11NsRegPortIpAddress,
t11NsRegFabricPortName,
t11NsRegHardAddress,
t11NsRegSymbolicPortName,
t11NsRegSymbolicNodeName,
t11NsRegFc4Features,
t11NsRegFc4Descriptor }
STATUS current
DESCRIPTION
"A collection of objects for monitoring the information
registered in a Name Server Information Subset."
::= { t11NsMIBGroups 1 }
t11NsRegNodeIpAddress,
t11NsRegProcAssoc,
t11NsRegFc4Type,
t11NsRegPortType,
t11NsRegPortIpAddress,
t11NsRegFabricPortName,
t11NsRegHardAddress,
t11NsRegSymbolicPortName,
t11NsRegSymbolicNodeName,
t11NsRegFc4Features,
t11NsRegFc4Descriptor }
STATUS current
DESCRIPTION
"A collection of objects for monitoring the information
registered in a Name Server Information Subset."
::= { t11NsMIBGroups 1 }
t11NsRequestStatsGroup OBJECT-GROUP
OBJECTS { t11NsInGetReqs,
t11NsOutGetReqs,
t11NsInRegReqs,
t11NsInDeRegReqs,
t11NsDatabaseFull}
STATUS current
DESCRIPTION
"A collection of objects for displaying Name
Server statistics and state for Name Server requests."
::= { t11NsMIBGroups 2 }
t11NsRequestStatsGroup OBJECT-GROUP
OBJECTS { t11NsInGetReqs,
t11NsOutGetReqs,
t11NsInRegReqs,
t11NsInDeRegReqs,
t11NsDatabaseFull}
STATUS current
DESCRIPTION
"A collection of objects for displaying Name
Server statistics and state for Name Server requests."
::= { t11NsMIBGroups 2 }
t11NsRscnStatsGroup OBJECT-GROUP
OBJECTS { t11NsInRscns,
t11NsOutRscns }
STATUS current
DESCRIPTION
"A collection of objects for displaying Name
Server statistics for Name Server-related RSCNs."
::= { t11NsMIBGroups 3 }
t11NsRscnStatsGroup OBJECT-GROUP
OBJECTS { t11NsInRscns,
t11NsOutRscns }
STATUS current
DESCRIPTION
"A collection of objects for displaying Name
Server statistics for Name Server-related RSCNs."
::= { t11NsMIBGroups 3 }
t11NsRejectStatsGroup OBJECT-GROUP
OBJECTS { t11NsInfoSubsetTotalRejects,
t11NsRejects }
STATUS current
DESCRIPTION
"A collection of objects for displaying Name
Server statistics for rejects."
::= { t11NsMIBGroups 4 }
t11NsRejectStatsGroup OBJECT-GROUP
OBJECTS { t11NsInfoSubsetTotalRejects,
t11NsRejects }
STATUS current
DESCRIPTION
"A collection of objects for displaying Name
Server statistics for rejects."
::= { t11NsMIBGroups 4 }
t11NsNotifyControlGroup OBJECT-GROUP
t11NsNotifyControlGroup对象组
OBJECTS { t11NsRejectCtCommandString,
t11NsRejectReasonCode,
t11NsRejReasonCodeExp,
t11NsRejReasonVendorCode,
t11NsInfoSubsetRejReqNotfyEnable }
STATUS current
DESCRIPTION
"A collection of notification control and
notification information objects for monitoring
rejections of Name Server registrations."
::= { t11NsMIBGroups 5 }
OBJECTS { t11NsRejectCtCommandString,
t11NsRejectReasonCode,
t11NsRejReasonCodeExp,
t11NsRejReasonVendorCode,
t11NsInfoSubsetRejReqNotfyEnable }
STATUS current
DESCRIPTION
"A collection of notification control and
notification information objects for monitoring
rejections of Name Server registrations."
::= { t11NsMIBGroups 5 }
t11NsNotifyGroup NOTIFICATION-GROUP
NOTIFICATIONS {t11NsRejectRegNotify }
STATUS current
DESCRIPTION
"A collection of notifications for monitoring
rejections of Name Server registrations."
::= { t11NsMIBGroups 6 }
t11NsNotifyGroup NOTIFICATION-GROUP
NOTIFICATIONS {t11NsRejectRegNotify }
STATUS current
DESCRIPTION
"A collection of notifications for monitoring
rejections of Name Server registrations."
::= { t11NsMIBGroups 6 }
END
终止
This document began life as a work item of the INCITS Task Group T11.5. We wish to acknowledge the many contributions and comments from the INCITS Technical Committee T11, including the following:
本文件作为INCITS任务组T11.5的一个工作项开始使用。我们希望感谢INCITS技术委员会T11的许多贡献和评论，包括以下内容：
T11 Chair: Robert Snively, Brocade T11 Vice Chair: Claudio DeSanti, Cisco Systems T11.5 Chair: Roger Cummings, Symantec T11.5 members, especially: Ken Hirata, Emulex Scott Kipp, McData Michael O'Donnell, McData Elizabeth G. Rodriguez, Dot Hill Steven L. Wilson, Brocade Bob Nixon, Emulex
T11主席：Robert Snifly，Brocade T11副主席：Claudio DeSanti，Cisco Systems T11.5主席：罗杰·卡明斯，赛门铁克T11.5成员，特别是：肯·海拉塔，Emulex Scott Kipp，McData Michael O'Donnell，McData Elizabeth G.Rodriguez，Dot Hill Steven L.Wilson，Brocade Bob Nixon，Emulex
Thanks also to Orly Nicklass of RAD Data Communications, Bert Wijnen of Lucent, and those members of the IMSS WG who provided review comments.
还要感谢RAD数据通信公司的Orly Nicklass、朗讯公司的Bert Wijnen以及提供审查意见的IMSS工作组成员。
[RFC2578] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2578]McCloghrie，K.，Perkins，D.，和J.Schoenwaeld，“管理信息的结构版本2（SMIv2）”，STD 58，RFC 2578，1999年4月。
[RFC2579] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999.
[RFC2579]McCloghrie，K.，Perkins，D.，和J.Schoenwaeld，“SMIv2的文本约定”，STD 58，RFC 2579，1999年4月。
[RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999.
[RFC2580]McCloghrie，K.，Perkins，D.，和J.Schoenwaeld，“SMIv2的一致性声明”，STD 58，RFC 25801999年4月。
[RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture for Describing Simple Network Management Protocol (SNMP) Management Frameworks", STD 62, RFC 3411, December 2002.
[RFC3411]Harrington，D.，Presohn，R.，和B.Wijnen，“描述简单网络管理协议（SNMP）管理框架的体系结构”，STD 62，RFC 3411，2002年12月。
[FC-FS] "Fibre Channel - Framing and Signaling (FC-FS)" ANSI INCITS 373-2003, April 2003.
[FC-FS]“光纤通道-帧和信令（FC-FS）”，ANSI INCITS 373-2003，2003年4月。
[FC-GS-3] "Fibre Channel - Generic Services - 3 (FC-GS-3)", ANSI INCITS 348-2000, November 2000.
[FC-GS-3]“光纤通道-通用服务-3（FC-GS-3）”，ANSI INCITS 348-2000，2000年11月。
[FC-GS-4] "Fibre Channel - Generic Services - 4 (FC-GS-4)", ANSI INCITS 387-2004, February 2004.
[FC-GS-4]“光纤通道-通用服务-4（FC-GS-4）”，ANSI INCITS 387-2004，2004年2月。
[FC-SW-3] "Fibre Channel - Switch Fabric - 3 (FC-SW-3)", ANSI INCITS 384-2004, June 2004.
[FC-SW-3]“光纤通道-交换机结构-3（FC-SW-3）”，ANSI INCITS 384-2004，2004年6月。
[FC-SW-4] "Fibre Channel - Switch Fabric - 4 (FC-SW-4)", ANSI INCITS 418-2006, 2006.
[FC-SW-4]“光纤通道-交换机结构-4（FC-SW-4）”，ANSI INCITS 418-2006，2006年。
[FC-MGMT] McCloghrie, K., "Fibre Channel Management MIB", RFC 4044, May 2005.
[FC-MGMT]McCloghrie，K.，“光纤通道管理MIB”，RFC 4044，2005年5月。
[FC-FAM-MIB] DeSanti, C., Gaonkar, V., McCloghrie, K., and S. Gai, "Fibre Channel Fabric Address Manager MIB", RFC 4439, April 2006.
[FC-FAM-MIB]DeSanti，C.，Gaonkar，V.，McCloghrie，K.，和S.Gai，“光纤通道结构地址管理器MIB”，RFC 4439，2006年4月。
[RFC2741] Daniele, M., Wijnen, B., Ellison, M., and D. Francisco, "Agent Extensibility (AgentX) Protocol Version 1", RFC 2741, January 2000.
[RFC2741]Daniele，M.，Wijnen，B.，Ellison，M.，和D.Francisco，“代理可扩展性（AgentX）协议版本1”，RFC 27412000年1月。
[RFC2837] Teow, K., "Definitions of Managed Objects for the Fabric Element in Fibre Channel Standard", RFC 2837, May 2000.
[RFC2837]Teow，K.，“光纤通道标准中结构元素的托管对象定义”，RFC 2837，2000年5月。
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction and Applicability Statements for Internet-Standard Management Framework", RFC 3410, December 2002.
[RFC3410]Case，J.，Mundy，R.，Partain，D.，和B.Stewart，“互联网标准管理框架的介绍和适用性声明”，RFC 34102002年12月。
[IF-MIB] McCloghrie, K. and F. Kastenholz, "The Interfaces Group MIB", RFC 2863, June 2000.
[IF-MIB]McCloghrie，K.和F.Kastenholz，“接口组MIB”，RFC 28632000年6月。
IANA has assigned a MIB OID to the T11-FC-NAME-SERVER-MIB module under the appropriate subtree.
IANA已将MIB OID分配给相应子树下的T11-FC-NAME-SERVER-MIB模块。
There is one management object defined in this MIB module with a MAX-ACCESS clause of read-write and/or read-create. Such objects may be considered sensitive or vulnerable in some network environments. The support for SET operations in a non-secure environment without proper protection can have a negative effect on network operations. This object and its sensitivity/vulnerability is:
此MIB模块中定义了一个管理对象，其MAX-ACCESS子句为read-write和/或read-create。在某些网络环境中，此类对象可能被视为敏感或易受攻击。在没有适当保护的非安全环境中支持SET操作可能会对网络操作产生负面影响。此对象及其敏感度/漏洞为：
t11NsInfoSubsetRejReqNotfyEnable -- the ability to enable/disable notifications.
T11nsInfoSubstreJReqNotfyEnable——启用/禁用通知的功能。
Such objects may be considered sensitive or vulnerable in some network environments. For example, the ability to change network topology or network speed may afford an attacker the ability to obtain better performance at the expense of other network users. The support for SET operations in a non-secure environment without proper protection can have a negative effect on network operations.
在某些网络环境中，此类对象可能被视为敏感或易受攻击。例如，更改网络拓扑或网络速度的能力可能使攻击者能够以牺牲其他网络用户为代价获得更好的性能。在没有适当保护的非安全环境中支持SET操作可能会对网络操作产生负面影响。
Some of the readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) may be considered sensitive or vulnerable in some network environments. It is thus important to control even GET and/or NOTIFY access to these objects and possibly to even encrypt the values of these objects when sending them over the network via SNMP. These are the tables and objects and their sensitivity/vulnerability:
在某些网络环境中，此MIB模块中的某些可读对象（即具有MAX-ACCESS而非not ACCESS的对象）可能被视为敏感或易受攻击。因此，在通过SNMP通过网络发送这些对象时，控制甚至获取和/或通知对这些对象的访问，甚至可能加密这些对象的值，这一点非常重要。以下是表和对象及其敏感度/漏洞：
t11NsRegTable -- contains information about registered Nx_Ports.
t11NsRegTable--包含有关已注册Nx_端口的信息。
t11NsStatsTable -- contains statistics and state information about the Name Server.
t11NsStatsTable——包含有关名称服务器的统计信息和状态信息。
SNMP versions prior to SNMPv3 did not include adequate security. Even if the network itself is secure (for example by using IPsec), even then, there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB module.
SNMPv3之前的SNMP版本未包含足够的安全性。即使网络本身是安全的（例如通过使用IPsec），即使如此，也无法控制安全网络上的谁可以访问和获取/设置（读取/更改/创建/删除）此MIB模块中的对象。
It is RECOMMENDED that implementors consider the security features as provided by the SNMPv3 framework (see [RFC3410], section 8), including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy).
建议执行者考虑SNMPv3框架所提供的安全特性（参见[RCFC310]，第8节），包括对SNMPv3加密机制的完全支持（用于身份验证和隐私）。
Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of this MIB module is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them.
此外，不建议部署SNMPv3之前的SNMP版本。相反，建议部署SNMPv3并启用加密安全性。然后，客户/运营商应负责确保授予访问此MIB模块实例权限的SNMP实体已正确配置为仅授予那些拥有确实获取或设置（更改/创建/删除）对象的合法权限的主体（用户）访问对象。
Authors' Addresses
作者地址
Claudio DeSanti Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA
Claudio DeSanti Cisco Systems，Inc.美国加利福尼亚州圣何塞西塔斯曼大道170号，邮编95134
Phone: +1 408 853-9172
EMail: cds@cisco.com
Phone: +1 408 853-9172
EMail: cds@cisco.com
Vinay Gaonkar Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA
Vinay Gaonkar Cisco Systems，Inc.美国加利福尼亚州圣何塞西塔斯曼大道170号，邮编95134
Phone: +1 408 527-8576
EMail: vgaonkar@cisco.com
Phone: +1 408 527-8576
EMail: vgaonkar@cisco.com
H.K. Vivek Cisco Systems, Inc. 71 Millers Rd Bangalore, India
H.K.Vivek Cisco Systems，Inc.印度班加罗尔米勒路71号
Phone: +91 80 2289933x5117
EMail: hvivek@cisco.com
Phone: +91 80 2289933x5117
EMail: hvivek@cisco.com
Keith McCloghrie Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA USA 95134
Keith McCloghrie Cisco Systems，Inc.美国加利福尼亚州圣何塞西塔斯曼大道170号，邮编95134
Phone: +1 408-526-5260
EMail: kzm@cisco.com
Phone: +1 408-526-5260
EMail: kzm@cisco.com
Silvano Gai Retired
西尔瓦诺·盖退休了
Full Copyright Statement
完整版权声明
Copyright (C) The Internet Society (2006).
版权所有（C）互联网协会（2006年）。
This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.
本文件受BCP 78中包含的权利、许可和限制的约束，除其中规定外，作者保留其所有权利。
This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
本文件及其包含的信息是按“原样”提供的，贡献者、他/她所代表或赞助的组织（如有）、互联网协会和互联网工程任务组不承担任何明示或暗示的担保，包括但不限于任何保证，即使用本文中的信息不会侵犯任何权利，或对适销性或特定用途适用性的任何默示保证。
Intellectual Property
知识产权
The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79.
IETF对可能声称与本文件所述技术的实施或使用有关的任何知识产权或其他权利的有效性或范围，或此类权利下的任何许可可能或可能不可用的程度，不采取任何立场；它也不表示它已作出任何独立努力来确定任何此类权利。有关RFC文件中权利的程序信息，请参见BCP 78和BCP 79。
Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr.
向IETF秘书处披露的知识产权副本和任何许可证保证，或本规范实施者或用户试图获得使用此类专有权利的一般许可证或许可的结果，可从IETF在线知识产权存储库获取，网址为http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org.
IETF邀请任何相关方提请其注意任何版权、专利或专利申请，或其他可能涵盖实施本标准所需技术的专有权利。请将信息发送至IETF的IETF-ipr@ietf.org.
Acknowledgement
确认
Funding for the RFC Editor function is provided by the IETF Administrative Support Activity (IASA).
RFC编辑器功能的资金由IETF行政支持活动（IASA）提供。